Abstract:Ion mobility-mass spectrometry (IM-MS) is a powerful analytical tool for structural characterization. IM measurement provides collision cross section (CCS) values that facilitate analyte identification. While CCS values can be directly calculated from mobility measurements obtained using drift tube ion mobility spectrometry (DT-IMS), this method has limited mobility resolution due to the practical constraints on the length of the ion drift path. Consequently, DT-IMS cannot differentiate analytes with similar mobilities or resolve fine mobility features of individual ions. Cyclic IMS (cIMS) instruments leverage a cyclic path enabled by traveling wave ion mobility (TWIM) technology and offer increased mobility solution to address this challenge. While TWIM devices must first be calibrated to enable CCS measurements, current calibration strategies are primarily tailored for single-pass analyses. This preference is partly attributed to the challenges associated with multi-pass calibration methods, which require both calibrants and analytes to experience the same number of passes. Achieving this consistency can be complicated due to factors like peak splitting and diffusion, and may not be feasible for on-line IM-MS analyses. A recent report employed average ion velocities obtained from multiple measurements under different separation pathlengths as a pathlength-independent metric for CCS calibration. However, the ability to exploit this averaging approach is limited by observed variation in ion drift time/velocity in these measurements. In this study, we introduce a novel calibration strategy designed for multi-pass cIMS analyses, directly targeting the root cause for the pathlength- and mobility-dependent variations in ion drift time. With this method, we demonstrate that CCS values derived from multi-pass measurements closely align with those obtained from single-pass analyses, with an average deviation of 0.1%. We apply this method to characterize four isomeric trisaccharides. Our approach not only results in excellent agreement between our measured cIMSCCS values and the reported DTCCS values, with an average difference of only 0.5%, but also allows us to effectively identify subtle mobility characteristics of each compound and determine their respective CCS values. This level of detail and accuracy was previously unattainable using DT-IMS or single-pass cIMS measurements. We developed an algorithm for reconstructing arrival time distribution in cases where wrap-around has resulted in peak splitting. Collectively, the new calibration strategy and the reconstruction procedure maintain reproducibility and precision in CCS measurements while largely eliminating the need for meticulous selection of separation times. We expect that our method will empower researchers to harness the high mobility resolution offered by multi-pass cIMS analyses without compromising the accuracy of CCS measurement, making it appropriate for straightforward use across a wide range of applications.

Utilization of bis-MPA Dendrimers for the Calibration of Ion Mobility Collision Cross Section Calculations

Exploring the Conformational Landscape of Poly(L-lysine) Dendrimers using Ion Mobility Mass Spectrometry

Mass spectrometry of dendrimers

Accurate Collisional Cross Section Measurement by Multi-pass Cyclic Ion Mobility Spectrometry

High Accuracy Ion Mobility Spectrometry for Instrument Calibration

A Simple and Demountable Capillary Microflow Nebulizer with A Tapered Tip for Inductively Coupled Plasma Mass Spectrometry

Graph-Based Method for Calibration of High-Resolution Mass Spectra of Natural Organic Matter.

Ion Mobility Mass Spectrometry for Synthetic Molecules: Expanding the Analytical Toolbox

Evaluation of a Reference-Free Collision Cross Section Calibration Strategy for Proteomics Using SLIM-Based High-Resolution Ion Mobility Spectrometry-Mass Spectrometry

Evaluation of Ion Mobility Spectrometry for Improving Constitutional Assignment in Natural Product Mixtures

Tandem Mass Spectrometry Reflects Architectural Differences in Analogous, Bis-MPA-Based Linear Polymers, Hyperbranched Polymers, and Dendrimers

Improved Mass Accuracy and Precision for Multiattribute Methods Using a New Internally Calibrated High Resolution Orbitrap Mass Detector

Using ion mobility spectrometry to understand signal dilution during tandem mass spectrometry sequencing of digital polymers: Experimental evidence of intramolecular cyclization

Toward Part-per-Million Precision in the Determination of an Ion's Collision Cross Section Using Multipass Cyclic Ion Mobility

Ion Mobility Mass Spectrometry (IM-MS) for Structural Biology: Insights Gained by Measuring Mass, Charge, and Collision Cross Section

Novel approach of mass calibration in MALDI/FTMS

A Flexible, Modular Platform for Multidimensional Ion Mobility of Native-like Ions

Vibrational study of mycophenolic acid and its quantification with electrochemically assisted surface-enhanced Raman spectroscopy

SpectiCal: m / z Calibration of MS2 Peptide Spectra Using Known Low Mass Ions

Ion-Molecule Collision Cross-Section Calculations Using Trajectory Parallelization in Distributed Systems