Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. A detailed computational study was carried out to explore how the presence of a cavity and cavity angles influence the performance and combustion mechanisms within a scramjet combustor. This research utilized ANSYS Fluent 2021 to create hexahedral meshes and simulate the complex fluid dynamics in scramjet engines equipped with dual strut injectors. The simulations addressed various critical aspects of fluid mechanics, including the continuity, momentum (via the Navier-Stokes equations), and energy equations. These equations were used to model non-reacting flows, while the species transport equations were applied to analyse reacting flows. The turbulence within the combustor was modelled using the standard K-ε model, a common choice for such high-speed aerodynamic evaluations. The study's primary goal was to assess the effects of different geometrical configurations of cavity flame holders on the performance characteristics of an H2-based scramjet combustor overall efficiency, focusing on mixing efficiency, combustion performance, and total pressure loss. Both configurations with and without a cavity were examined. Key findings indicate that incorporating a cavity into the combustor design leads to developing a robust recirculation zone within the cavity area. This recirculation zone is pivotal in enhancing fuel-air mixing and combustion efficiency, with cavity-based combustors showing an earlier onset of combustion and achieving peak combustion efficiencies around 90–95%. The extent of the recirculation region is notably influenced by the proximity of the strut injector to the cavity's length. Additionally, the presence of a shear layer within the cavity generates a weak shock at the cavity's trailing edge. This shock interaction can adversely affect scramjet combustor performance, especially at higher cavity angles (α) and specific geometric configurations, such as an L/D ratio of 4 and α=30°. The L/D ratio of 4 and α=30° combustor model results in a 13.8% increase in turbulence intensity, which raises air-fuel mixing and there by improves mixing and combustion efficiency by 14.23% and 13.34%, compared to the other depth of the cavities. This advantage is critical, especially considering the compact length of the combustor, which is a desirable attribute in scramjet design.

Impact of an extruded nozzle on flame stability and fuel mixing in a cavity flame holder

Influence of coaxial fuel–air jets on mixing performance of extruded nozzle at supersonic combustion chamber: Numerical study

Estimation of the fuel mixing of annular extruded fuel multi-jets in cavity flame holder at the supersonic combustion chamber via predictive surrogate model

Impact of Fuel Injection Distribution on Flame Holding in a Cavity-Stabilized Scramjet

Flame Stabilization and Local Combustion Modes in a Cavity-Based Scramjet Using Different Fuel Injection Schemes

Numerical Investigation on Combustion Flow of a Kerosene-Fueled Scramjet with 3D Cavity(ⅱ) Preliminary Investigation on Fuel/air Mixing and Flame Stabilization Enhanced by 3D Cavity

The role of annular 2-lobe nozzle in a strut injection system on the mechanism of fuel distribution at a scramjet engine

Influence of the non-equal aligned nozzles for fuel injection inside the supersonic combustion chamber

Effects of Additional Cavity Floor Injection on the Ignition and Combustion Processes in a Mach 2 Supersonic Flow

Numerical investigation on influence of different geometrical cavity flame holders and flame stabilization mechanism in hydrogen fueled multi-strut-based scramjet combustor

Using shock generator for the fuel mixing of the extruded single 4-lobe nozzle at supersonic combustion chamber

Powder fuel transport process and mixing characteristics in cavity-based supersonic combustor with different injection schemes

Computational modeling of the rectangular non-aligned multi-injector for efficient fuel mixing in a supersonic combustion chamber

Numerical Investigation on Cavity Structure of Solid-Fuel Scramjet Combustor

Investigation of unswept ramp system with lobe shape nozzle for fuel mixing of hydrogen jet at a scramjet engine

Flame Interaction Characteristics in Scramjet Combustor Equipped with Strut/Wall Combined Fuel Injectors

Numerical and experimental investigation of streamwise-vortex/fuel-plume interactions in a scramjet combustor

Effect of Fuel Injection Allocation on the Combustion Characteristics of a Cavity-Strut Model Scramjet

Large eddy simulation of hydrogen/air co-flow jet flame in the strut-based supersonic combustor

Numerical Investigation on Cavity Length for Solid Fuel Scramjet

Experimental and numerical study on a cavity-swirler-based combustion strategy for advanced gas turbine engine