Abstract:Accumulative Roll Bonding(ARB) process was used to develop few-layer graphene nano platelets reinforced aluminum matrix (GNPs/Al) composite in the form of sheets. Annealed Al sheets were ARB processed up to 6 pass along with coating of graphene between stacked sheets in first and second pass. Another set was prepared with same process parameter in the absence of graphene coating. Properties of these two set of samples were analyzed on the basis of film theory of ARB process which enables micro-level mixing of material on stacked layer interface. Hence the problem of graphene agglomeration was overcome through our process. The Raman spectra at the cross-section was taken which not only show the strong interaction of GNPs with Al matrix due to increased D and D' band but also the graphene quality enhancement on the basis of single symmetric 2D band. Samples were then subjected to universal testing machine (UTM) and Vickers microhardness tester. Results showed up to ~73% increment in yield strength and ~27% increment in hardness of GNPs/Al matrix composite. Fracture surface of tensile specimen was further examined under SEM to understand the fracture mechanics at higher passes, which elucidate elongation variation and delamination behavior of stacked sheets. Deep elongated dimples with the smoothed surface in GNPs/Al composite are the cause of reduced elongation. But the final composite was having improved strength with appreciable ductility. The improvement was further justified by increment in dislocations, calculated using Williamson-Hall plot on X-ray diffraction (XRD) data. All results signify the effectiveness of the proposed technique for the development of GNPs/Al composite.

GNPs/Al nanocomposites with high strength and ductility and electrical conductivity fabricated by accumulative roll-compositing

Preparation and properties of graphene nanoplatelets reinforced aluminum composites

Graphene nano-platelets reinforced aluminum composites with anisotropic compressive properties

Microstructure and mechanical properties of ADC12 composites reinforced with graphene nanoplates prepared by ultrasonic assisted casting

High-content graphene nanoplatelet reinforced aluminum composites produced by ball milling and hot extrusion

Effect of Graphene on the Microstructure Evolution and Mechanical Properties of Al–10Si–2Cu–1.5Fe Aluminum Matrix Composites

Enhancing the Strengthening Effect of Graphene-Nanoplates in Al Matrix Composites by Heterogeneous Matrix Design

Fabrication of efficient aluminium/graphene nanosheets (Al-GNP) composite by powder metallurgy for strength applications

Effect of SiC nanoparticle on microstructure and mechanical properties of graphene nanosheet (GNS) reinforced aluminum composites

Graphene platelets reinforced aluminum matrix composite with enhanced strength by hot accumulative roll bonding

Enhanced mechanical behavior and fabrication of graphite flakes covered by aligned graphene nanoplatelets reinforced 2A12 aluminum composites

Microstructure, mechanical and thermal properties of ultrafine-grained Al2024–TiC-GNPs nanocomposite

Development of Al- and Cu-based nanocomposites reinforced by graphene nanoplatelets: Fabrication and characterization

Enhanced through-plane thermal conductivity and mechanical properties of vertically aligned graphene nanoplatelet@graphite flakes reinforced aluminum composites

Homogeneous dispersion and mechanical performance of aluminum reinforced with high graphene content

Architectured interfacial interlocking structure for enhancing mechanical properties of Al matrix composites reinforced with graphene nanosheets

Achieving prominent strengthening efficiency of graphene nanosheets in Al matrix composites by hybrid deformation

Synthesis and characterization of graphene nanoplatelets reinforced AA7068 matrix nanocomposites produced by liquid metallurgy route

Graphene Nanoplatelets Reinforced Magnesium Matrix Composites Fabricated by Thixomolding

Simultaneously Enhancing Mechanical Properties and Electrical Conductivity of Aluminum by Using Graphene As the Reinforcement

Development of AZ91D Magnesium Alloy-Graphene Nanoplatelets Composites Using Thixomolding Process