Preparation of Cationic Polyacrylamide Suspension and Its Application in Oilfield Wastewater Treatment

Zhongjin Wei,Wenjun Long,Shaohua Li,Yu Zhao,Siting Yu,Fengshan Zhou

DOI: https://doi.org/10.3390/polym16010151

IF: 5

2024-01-05

Polymers

Abstract:Cationic polyacrylamide (CPAM) solid particle is one of the most commonly used organic polymer flocculants in oilfield wastewater treatment, but it poses some problems, such as a slow dissolution rate and an easy formation into a "fish-eye" in the process of diluting into aqueous solution. However, the current liquid CPAM products also have some problems, such as low effective content, poor storage stability, degradation in a short time, and high preparation costs. In this paper, a CPAM suspension was successfully prepared with 50.00% CPAM fine powder, 46.87% oil phase solvent, 0.63% separating agent, 1.56% emulsifying and dispersing agent, and 0.94% rheology modifier. This suspension has an effective content of 50.00%. It also showed no separation in 7 days of storage at room temperature, no separation in 30 min of centrifugation at a speed of 2000 rpm, and diluted to a 0.40% solution in just 16.00 min. For 1000 NTU of diatomite-simulated wastewater, the optimal turbidity removal rate of the suspension was 99.50%, which was higher than the optimal turbidity removal rate of 98.40% for the inorganic flocculant polymeric aluminum chloride (PAC). For oilfield wastewater, the optimal turbidity removal rate of the CPAM suspension was 35.60%, which was higher than the optimal turbidity removal rate of 28.40% for solid particle CPAM. In a scale-up test, the CPAM suspension achieved a good application effect.

polymer science

What problem does this paper attempt to address?

### The Problem Addressed by This Paper

This paper primarily investigates the issues associated with cationic polyacrylamide (CPAM) in the process of oilfield wastewater treatment. Specifically:

1. **Problems with solid particle CPAM**:
- Slow dissolution rate;
- Tendency to form "fisheyes," leading to flocculant waste or pipeline blockage.

2. **Problems with liquid CPAM products**:
- Low active content;
- Poor storage stability;
- High preparation cost;
- Easy degradation in a short period.

To overcome these issues, the authors developed a new type of CPAM suspension with the following characteristics:
- **Good solubility**: Can dissolve quickly without forming "fisheyes," addressing the solubility issues of current solid CPAM products.
- **Good stability**: Solves the problems of existing liquid products that easily deteriorate in summer, freeze in winter, and degrade quickly.
- **High active content**: Reduces storage, transportation, and packaging costs, overcoming the issue of low active content in existing liquid products.

The performance of this new CPAM suspension was verified through experiments, and its practical application in oilfield wastewater treatment was confirmed.