Abstract:Based on microbial induced carbonate precipitation (MICP), soil modification technology has attracted widespread concern in geotechnical engineering. This technology can not only improve the soil strength, stiffness, the properties of anti-liquefaction, anti-erosion and anti-permeability but also maintain good soil permeability and water permeability and improve the growth environment of the plants simultaneously. As the microbial mineralisation involves a series of complex biochemical and ion chemical reactions in the curing process, soil modification through MICP curing can be affected by many factors. In this paper, the effects of influence factors on the performance of microbial improved geomaterials were summarised, such as bacterial species, bacterial concentration, temperature, pH, the ratio of cement solution and soil properties, and their optimisation methods and future research direction were discussed as well. The conclusions are as follows. The bacteria type, bacteria concentration, temperature, pH, and the nature of the cement can affect the crystal type, crystal appearance, and size of calcium carbonates microscopically, and further affect the cementing effect of geomaterials macroscopically. The optimized conditions for strengthening the geomaterials are under the high bacteria concentration, the temperature from 20 degrees C to 40 degrees C, the pH from 7 to 9.5, and the concentration of the cementation solution within 1 mol/L. In the optimised range of those factors, the soil permeability is improved by relatively low temperature, high pH value, and low concentration of cementation solution, while the soil strength is enhanced by the relatively high temperature, low pH value and high concentration of cementation solution. The effective grain size ranges from 10 to 1 000 mu m, and the relatively large size and good gradation can promote the consolidation effect. The methods of multi-phase grouting, multi-concentration grouting and electroosmosis grouting improve the uniformity of soil solidification. The grouting speed below 0.042 mol/L/h is beneficial to improve the utilization ratio of the cement solution. The grouting pressure of the sand specimen is generally between 10 kPa similar to 30 kPa bar, the grouting pressure of the silt and clay specimen should not exceed 110 kPa, and the high grouting pressure destroys the structure of soil and reduces the curing effect.

Environmental Factors Affecting the Compressive Strength of Microbiologically Induced Calcite Precipitation-Treated Soil

TEMPERATURE EFFECTS ON THE STRENGH PROPERTIES OF MICROBIALLY STABILIZED RESIDUAL SOIL

Study on the Effects and Mechanism of the Reinforcement of Soft Clay Via Microbially Induced Carbonate Precipitation

Experimental Study on the Influence of Different Factors on the Mechanical Properties of a Soil–Rock Mixture Solidified by Micro-Organisms

A Comprehensive optimization study of Microbially Induced Carbonate Precipitation (MICP) for soil strength enhancement: impact of biochemical and environmental factors

Mechanical Properties of Cement Soil Improved Using Microbial-Induced Calcite Precipitation

Factors Affecting Improvement In Engineering Properties Of Geomaterials By Microbial-Induced Calcite Precipitation

Effect of Biologically Induced Cementation via Ureolysis in Stabilization of Silty Soil

Application of microbial biocementation to improve the physico-mechanical properties of cement mortar

Assessment of the Composition Effect of a Bio-Cementation Solution on the Efficiency of Microbially Induced Calcite Precipitation Processes in Loose Sandy Soil

Investigating the Factors Affecting the Properties of Coral Sand Treated with Microbially Induced Calcite Precipitation

Influence of temperature on microbially induced calcium carbonate precipitation for soil treatment

Influence of Key Environmental Conditions on Microbially Induced Cementation for Soil Stabilization

The effect of different additives on bacteria adsorption, compressive strength and ammonia removal for MICP

Review of Strength Improvements of Biocemented Soils

A study of bacteria producing carbonic anhydrase enzyme for CaCO3 precipitation and soil biocementation

Study on influencing factors of microbial induced calcite precipitation insolution environment

Environmental Dependence of Microbially Induced Calcium Carbonate Crystal Precipitations: Experimental Evidence and Insights

Microbial-Induced Carbonate Precipitation for Strengthening Soft Clay

Assessment of Microbial Induced Calcite Precipitation (MICP) in Fine Sand Using Native Microbes under Both Aerobic and Anaerobic Conditions