Metallic two-dimensional BP 2 : a high-performance electrode material for Li- and Na-ion batteries

Xiao-Juan Ye,Jie Xu,Yan-Dong Guo,Chun-Sheng Liu

DOI: https://doi.org/10.1039/d0cp00187b

IF: 3.3

2021-01-01

Physical Chemistry Chemical Physics

Abstract:Metallic two-dimensional BP 2 as a high-performance electrode material for Li- and Na-ion batteries.

chemistry, physical,physics, atomic, molecular & chemical

What problem does this paper attempt to address?

Two-dimensional metallic BP as anode material for lithium-ion and sodium-ion batteries with unprecedented performance

Wen-Cong Sun,Shan-Shan Wang,Shuai Dong

DOI: https://doi.org/10.1007/s10853-021-06174-9

IF: 4.5

2021-05-21

Journal of Materials Science

Abstract:Improving the storage capacities of electrode materials is one of the most critical points for ion batteries. Two-dimensional (2D) topological semimetals with high carrier mobility are naturally suitable as electrode materials. Herein, using the first-principle calculations, 2D BP monolayer with Dirac-type band structure is predicted to be a superior anode material with ultrahigh capacity for both Li/Na-ion batteries. The BP monolayer remains metallic after the adsorption of Li/Na ions, ensuring a good conductivity. Furthermore, BP owns low diffusion barriers (0.35 eV for Li ions and 0.16 eV for Na ions) and a moderate lattice change (3%) during the process of charging and discharging. Remarkably, the storage capacity of monolayer BP is enhanced to 1924 mAh/g by multilayer adsorption of both Li/Na ions, much higher than those of most previous 2D anode materials. All these characteristics strongly suggest that BP has great potential as a superior anode material in Li/Na-ion batteries.

materials science, multidisciplinary
Metallic VS 2 /graphene heterostructure as an ultra-high rate and high-specific capacity anode material for Li/Na-ion batteries

Bo Liu,Tianyu Gao,Peiguang Liao,Yufeng Wen,Mingjia Yao,Siqi Shi,Wenqing Zhang

DOI: https://doi.org/10.1039/d1cp02243a

IF: 3.3

2021-01-01

Physical Chemistry Chemical Physics

Abstract:Low Li + /Na + diffusion barrier, high theoretical-capacity and shallow averaged open-circuit-voltage make the VS 2 /graphene heterostructure a promising anode material for LIBs and NIBs.

chemistry, physical,physics, atomic, molecular & chemical
Investigation on novel two-dimensional BC 2 P monolayer: A promising anode with high theoretical capacity for Na-/Li-ion batteries

Guoqing Zeng,Jiahe Lin,Renquan Li,Xiaowei Chen

DOI: https://doi.org/10.1016/j.jpowsour.2024.235638

IF: 9.2

2024-10-22

Journal of Power Sources

Abstract:In the quest for sustainable energy solutions, identifying novel, cost-effective, and stable anode materials for metal-ion batteries has emerged as a critical research area. This study introduces a two-dimensional BC 2 P monolayer, explored through first-principles calculations, as a promising candidate for Li and Na anode material. We have confirmed the structural and thermodynamic stability of BC 2 P monolayer via phonon spectroscopy and molecular dynamics simulations. Additionally, the electronic structure analysis unveils the semimetallic nature of the BC 2 P monolayer. Notably, BC 2 P demonstrates an exceptional theoretical specific capacity for Li- and Na-ions, reaching up to 2240.89 mAhg −1 . This ultra-high capacity is complemented by relatively low diffusion barriers (416 meV for Li and 382 meV for Na) and favorable open-circuit voltages (ranging from 0.32 V to 1.28 V for Li and 0.25 V–1.23 V for Na). The characteristics of the proposed BC 2 P indicate its potential for achieving high-capacity energy storage and facilitating rapid ionic diffusion in Li- and Na-ion batteries.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Anomalous High Ionic Conductivity of Nanoporous Β-Li3ps4

Zengcai Liu,Wujun Fu,E. Andrew Payzant,Xiang Yu,Zili Wu,Nancy J. Dudney,Jim Kiggans,Kunlun Hong,Adam J. Rondinone,Chengdu Liang

DOI: https://doi.org/10.1021/ja3110895

IF: 15

2013-01-01

Journal of the American Chemical Society

Abstract:Lithium-ion-conducting solid electrolytes hold promise for enabling high-energy battery chemistries and circumventing safety issues of conventional lithium batteries. Achieving the combination of high ionic conductivity and a broad electrochemical window in solid electrolytes is a grand challenge for the synthesis of battery materials. Herein we show an enhancement of the room-temperature lithium-ion conductivity by 3 orders of magnitude through the creation of nanostructured Li(3)PS(4). This material has a wide electrochemical window (5 V) and superior chemical stability against lithium metal. The nanoporous structure of Li(3)PS(4) reconciles two vital effects that enhance the ionic conductivity: (1) the reduction of the dimensions to a nanometer-sized framework stabilizes the high-conduction β phase that occurs at elevated temperatures, and (2) the high surface-to-bulk ratio of nanoporous β-Li(3)PS(4) promotes surface conduction. Manipulating the ionic conductivity of solid electrolytes has far-reaching implications for materials design and synthesis in a broad range of applications, including batteries, fuel cells, sensors, photovoltaic systems, and so forth.
Metal-organic Framework Nanosheets-Guided Uniform Lithium Deposition for Metallic Lithium Batteries

Zhanguo Jiang,Tiefeng Liu,Lijing Yan,Jie Liu,Feifei Dong,Min Ling,Chengdu Liang,Zhan Lin

DOI: https://doi.org/10.1016/j.ensm.2017.11.003

IF: 20.4

2018-01-01

Energy Storage Materials

Abstract:Metallic lithium (Li) has attracted much attention as anode for high-energy-density batteries because of its ultrahigh specific capacity (3860mAhg−1) and the lowest electrochemical potential. Uncontrolled Li dendrite growth gives rise to serious safety hazards with poor cycle life and low coulombic efficiency. Metal-organic framework (MOF) nanosheets modified electrodes are designed to inhabit Li dendrite growth with improved electrochemical performance. Due to high surface area and plentiful polar surface functional groups, MOF nanosheets possess enhanced electrolyte uptake capabilities and improved adhesive interactions with Li-ions, which facilitates well-distributed homogeneous Li ionic flux. A remarkable coulombic efficiency of 98% for over 180 cycles at a current density of 2.0mAcm−2 and a cycle capacity of 1.0mAhcm−2 is achieved. This study may pave a way for obtaining high-performance metallic Li batteries with a wide variety of MOFs-based materials.
Excellent Electrolyte Wettability and High Energy Density of B2S as a Two-Dimensional Dirac Anode for Non-Lithium-Ion Batteries

Shufei Lei,Xianfei Chen,Beibei Xiao,Wentao Zhang,Jia Liu

DOI: https://doi.org/10.1021/acsami.9b07219

2019-08-14

Abstract:Two-dimensional (2D) Dirac materials with ultrahigh electronic conductivity exhibit great promise for application as an anode material in non-lithium-ion batteries (NLIBs) with a reduced conductive additive and a binder as a nonactive material additive. Graphene is one of the most prominent 2D Dirac materials with high electrolyte wettability; however, it cannot be used as an anode material in NLIBs owing to its poor affinity toward metal ions such as Na, K, Ca, Mg, and Al. In this work, we investigated the use of recently developed boron sulfide (B2S) as a new lightweight 2D Dirac anode for NLIBs on the basis of first-principles calculations. We demonstrate that B2S delivers excellent electronic conductivity and has a unique "self-doping" effect by forming S or B vacancies. The ultrahigh energy densities of 2245 and 1167 mWh/g, a product of capacity and open-circuit voltage referenced by standard hydrogen electrode potential ( Cao Nat. Nanotechnology . 2019 , 14 , 200 - 207 ), could be achieved for the B2S anode in Na- and K-ion batteries, respectively, significantly larger than those of graphene. More importantly, the B2S presents graphene-like wettability toward commonly used electrolytes in Na- and K-ion batteries, i.e., the solvent molecules and metal salt, indicating excellent compatibility. Moreover, the minimum energy path for Na- and K-ion diffusion on the B2S surface shows energy barriers of 0.19 and 0.04 eV, which indicates high ionic conductivity. Furthermore, a small contraction of the B2S lattice upon ion intercalation has been observed due to the adsorption-induced corrugation of the electrode, which offsets the lattice expansion. The results suggest that the B2S electrode can be used as a lightweight 2D Dirac anode material with excellent energy density, desirable rate performance, and robust wettability toward the electrolytes.
A Stable Metallic 3d Porous Bpc2 As A Universal Anode Material For Li, Na, And K Ion Batteries With High Performance

Umer Younis,Muhammad Imran,Qayyum Fizzah,Yoshiyuki Kawazoe,Qiang Sun

DOI: https://doi.org/10.1039/d0ta10446a

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:Materials composed of B, C, and P have been hotly pursued for batteries due to their low mass and high abundance. However, all the reported 3D B-C-P compounds at present are semiconductors with low electrical conductivity. Motivated by the semi-metallic character of a stable 2D-BPC2 sheet, we propose the first metallic porous 3D structure by using BPC2 nanoribbons as the basic building blocks. Based on ab initio calculations, we find that the 3D porous BPC2 is highly stable dynamically and thermally. The exhibited intrinsic metallicity together with the unique morphology makes this porous structure a universal anode material for Li, Na, and K-ion batteries with high theoretical capacities of 407.29, 407.29, and 305.48 mA h g(-1), low diffusion barriers of 0.29, 0.05, and 0.03 eV, and small volume expansions of 0.25, 1.15, and 1.55%, respectively. These intriguing findings should stimulate experimental effort on synthesizing a metallic 3D porous universal anode for multi-ion batteries.
Two-dimensional MnBX monolayer as promising anode with record-high capacity and fast diffusion for Na-ion battery

Yue Kuai,Changcheng Chen,Pengfei Lu

2024-11-01

Abstract:Based on the group structure search method of first principles, MnB, MnB2, and MnB6 monolayer two-dimensional systems were designed and their structure, stability, electronic properties, as well as performance as anodes for sodium-ion batteries were examined. The findings indicate that the MnB, MnB2, and MnB6 monolayer two-dimensional systems possess high thermal stability, mechanical stability, dynamic stability, and distinctive metallic properties. When utilized in sodium-ion batteries, these MnB, MnB2, and MnB6 monolayers demonstrate high storage capacity, low diffusion barriers, and moderate open-circuit voltage. Due to its unique structure, the MnB monolayer presents a negative Poisson's ratio and a very low diffusion barrier. The theoretical capacitance of the MnB2 monolayer, when acting as an anode for sodium-ion batteries, exceeds that of the MnB and MnB6 monolayers. The research results reveal that boron-rich two-dimensional electrode materials pave a new way for energy applications. Particularly, MnB2 and MnB6 monolayer two-dimensional systems, as anode materials, incorporate the advantages of both planar and corrugated monolayer structures.

Materials Science,Mesoscale and Nanoscale Physics
Two-dimensional Metallic Pentadiamond As Anode Material for Li-/Na-/K-ion Batteries with High Performance

U. Younis,I. Muhammad,F. Qayyum,W. Wu,Q. Sun

DOI: https://doi.org/10.1016/j.mtener.2021.100664

IF: 9.257

2021-01-01

Materials Today Energy

Abstract:Metallic materials composed of light and rich abundant element such as carbon is of current interest in battery technology. In this study, as per the features of 3D pentadiamond reported recently, we propose a two-dimensional (2D) pentadiamond monolayer C-558 composed of pentagons and octagons. Based on first-principles calculations, we show that the metallic C-558 is dynamically and thermally stable. Furthermore, different from the semiconducting 3D-pentadiamond, the 2D-pentadiamond monolayer C-558 shows intrinsic metallicity with several adsorption sites for Li, Na, and K ions, which enable it to exhibit superhigh theoretical capacity of 2727.51, 2231.49, and 743.86 mAh/g, low voltage of 0.33, 0.33, and 0.80 V, and low energy barriers 0.42, 0.25, and 0.10 eV, respectively. The intrinsic metallicity together with ultrahigh specific capacity and low migration barrier suggests that the novel C-558 monolayer is promising for Li-, Na-, and K-ion batteries with high performance. (C) 2021 Elsevier Ltd. All rights reserved.
On two-dimensional metal borides (MBenes) as anode materials for metal-ion batteries: A first-principles study

Yusheng Wang,Sen Wang,Nahong Song,Xiaowei Wu,Jing Xu,Shijun Luo,Bin Xu,Fei Wang

DOI: https://doi.org/10.1016/j.commatsci.2023.112710

IF: 3.572

2023-12-07

Computational Materials Science

Abstract:To find excellent materials for metal-ion batteries, we investigated the possibility of two-dimensional (2D) monolayer MBenes (CrB, FeB, MnB) as anode materials for Li, Na, K, Mg, and Ca ion batteries based on density-functional theory. The results show that the monolayer MBenes have small diffusion energy barriers, can maintain a stable average open-circuit voltage, and a theoretical storage capacity of up to 853 mA h g −1 in Li-ion batteries, superior to other ordinary anode materials. These properties suggest that monolayer CrB, FeB, and MnB are promising anode materials for metal ion batteries with good rate capacity.

materials science, multidisciplinary
Unveiling the Advances of 2D Materials for Li/Na-S Batteries Experimentally and Theoretically

Chao Ye,Dongliang Chao,Jieqiong Shan,Huan Li,Kenneth Davey,Shi-Zhang Qiao

DOI: https://doi.org/10.1016/j.matt.2019.12.020

IF: 18.9

2020-01-01

Matter

Abstract:Metal-sulfur batteries hold practical promise for next-generation batteries because of high energy density and low cost. Development is impeded at present, however, because of unsatisfied discharge capacity and stability in long cycling. Combination of experimental and theoretical approaches can be used to develop insight into the relationship between electrochemical behavior of sulfur redox and metal stripping-plating and the structural properties of electrode materials. With metal-sulfur batteries, two-dimensional (2D) nanomaterials are a suitable model with which to connect and test experimental results with theoretical predictions and to explore structure-property relationships. Here, through the view of combining experimental and theoretical approaches, we explore sulfur redox conversion on 2D nanomaterials in various reaction stages and critically review crucial factors affecting 2D nanomaterials as artificial solid electrolyte interfaces (SEIs) and host materials in protecting Li and Na metal anodes. We conclude with a focused discussion on promising research orientations for developing high-performance metal-sulfur batteries.
Novel two-dimensional layered black phosphorus/nano-Si composites anode for Li-ion batteries

Han Li,Jingli Liu,Bin Liu,Jianwei Gu,Renzhuang Xu,Bingbing Chen,Jianqiu Zhou

DOI: https://doi.org/10.1016/j.mseb.2022.116198

2022-12-17

Abstract:Silicon (Si) anodes have high theoretical capacity and two-dimensional (2D) layered black phosphorus (BP) has a special negative Poisson's ratio effect (NPR). Therefore, we combined the 2D layered BP and Si to form a black phosphorus/silicon (BP/Si) composites anode, and investigated its electrochemical and mechanical properties by first-principles calculations based on density functional theory (DFT). The computational results show that the composite anode has higher energy density and better structural stability. Such as lower migration energy barrier and higher Li storage capacity. And by calculating the stress–strain relationship of the composite, it is found that the BP/Si composites anode has better mechanical properties, which means that the composite anode can effectively suppress the volume expansion after Li-ions intercalation, thus making the structure more stable and extending the battery life cycle. This work improves the understanding of the properties of new composites and provides valuable results for the development of 2D layered anode materials and high-performance electrode materials.

materials science, multidisciplinary,physics, condensed matter
Two-dimensional 1T-PS2 as a promising anode material for sodium-ion batteries with ultra-high capacity, low average voltage and appropriate mobility

Dawei Zhou,Chunping Li,Furong Yin,Xin Tang,Chunying Pu,Chaozheng He

DOI: https://doi.org/10.1016/j.cclet.2020.04.045

IF: 9.1

2020-09-01

Chinese Chemical Letters

Abstract:As electrodes, two-dimensional materials show special advantages including the infinite planar lengths, broad electrochemical window, large surface–volume ratio, and much exposed active sites. In theory, the two-dimensional materials consist of the elements with high electronegativity may absorb more Na atoms, resulting in a high battery storage capacity. Based on the above idea, we selected the two dimensional metallic PS2 with 1 T-Type structure as an anode material, and explored its potential applications as an electrode material for Na-ion battery through first-principle calculations. As we expected, when two dimensional PS2 is used as an anode in Na-ion battery, it can adsorb maximum three layers of sodium atoms on both sides of the monolayer, resulting in a maximum theoretical capacity of 1692 mA h/g. Furthermore, it also possesses a rather small sodium diffusion barrier of 0.17 eV, a low average open-circuit voltage of 0.18 V, and a relatively small lattice changes within 13% during the intercalation of Na. These results suggested that the two dimensional PS2 is a potentially excellent Na-ion battery anode. Our idea of designing two-dimensional anode materials with high storage capacity may provide some references for designing the next generation anode materials of metal-ion batteries.

chemistry, multidisciplinary
A New 3D Dirac Nodal-Line Semi-Metallic Graphene Monolith for Lithium Ion Battery Anode Materials

Jie Liu,Xiaoyin Li,Qian Wang,Yoshiyuki Kawazoe,Puru Jena

DOI: https://doi.org/10.1039/c8ta04428g

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:Design of a new 3D Dirac nodal-line semi-metallic graphene monolith with potential for a high performance lithium ion battery anode material.
Theoretical prediction of two-dimensional metallic AM 2 B 8 (AM = K, Rb, Cs) as anode materials for Na-ion batteries

Siqi Liu,Jinyan Chen,Yuhan Wang,Jianhua Hou,Qian Duan

DOI: https://doi.org/10.1016/j.mtcomm.2024.110284

IF: 3.8

2024-09-04

Materials Today Communications

Abstract:The development of two-dimensional anode materials with superior performance is becoming a critical undertaking for the advancement of Na-ion battery technology. Using isoelectronic substitution strategies, we predicted three alkali metal borides AM 2 B 8 (AM = K, Rb, Cs) based on the SrB 8 monolayer. Ab initio molecular dynamics simulations and phonon dispersion relationship calculations demonstrated their stability. Using density functional theory, we predict the feasibility of these three new metal nanosheets as anodes for Na-ion batteries. The AM 2 B 8 monolayer retains its metallicity after the insertion of Na ions, ensuring that the anode has good electrical conductivity. In addition, AM 2 B 8 has a low diffusion barrier and open circuit voltage (K 2 B 8 is 0.08 eV and 0.26 V) during charge/discharge. In the voltage range that inhibits dendrite growth, K 2 B 8 can reach the maximum theoretical specific capacity (326 mAh/g). These results indicate that AM 2 B 8 , especially K 2 B 8 , is a promising anode material for Na-ion batteries.

materials science, multidisciplinary
Sp2 Nanocarbon Materials for Lithium Ion Battery Applications

HUANG Jiaqi,ZHANG Qiang,JIN Yong,WEI Fei

2012-01-01

Abstract:sp2 Nanocarbon materials have attracted great interests in recent years due to their superior electrical,thermal and mechanical properties.Such properties are highly desirable for forming high performance electrodes and,as a result,the materials have found wide applications in lithium ion batteries.This paper provides a state-ofthe-art review of the applications of sp 2 nanocarbons in lithium ion batteries.Particular attention is drawn on the use of sp 2 nanocarbon as a high-capacity anode material and a highly electrically conductive,structurally strong and even flexible framework in which other electrode materials(e.g.silicon and metal oxides)can be incorporated to form coaxial or core-shell composites.It is concluded that further understanding of lithium ion storage mechanisms in sp 2 nanocarbon,controllable and scalable synthesis of the material,and methodologies for constructing threedimensional sp 2 nanocarbon electrodes with a high performance are among the most important aspects for future research.
Top-down design of high-performance V-based MBene anode for Li/Na-ion batteries

Shaohan Li,Weiwei Sun,Tingwei Zhu,Siwei Wang,Jing Zhang,Jin Yu,Wei Zheng,Guobing Ying,Litao Sun,Huayun Geng

DOI: https://doi.org/10.1039/d3cp05743g

2024-02-14

Abstract:Two-dimensional (2D) MBenes have enormous potential in energy applications. Vanadium metal, with its versatile and tunable electronic states, can further enhance the electrochemical performance of MBenes. However, most MBenes are composed of a few atomic layers as the metal boron (MB) block, e.g., M2B2, which might lead to instability and poor mechanical response. Herein, we designed and predicted 2D V4B6 associated with different terminations (T = Cl, O, S) using a top-down method and global search for parental V4AB6. Among the A element candidates, the P-glued MAB phase exhibited high stability and easy synthesizability. Moreover, 2D V4B6 was feasibly formed and easily exfoliated owing to its weak V-P bonding. Most of the surface functionalization could improve both the mechanical and electrochemical properties of the V4B6 monolayer. In particular, 2D V4B6S2 exhibited a high potential as an anode material for lithium-ion batteries (LIBs) with high theoretical capacity (297 mA h g-1), low diffusion barrier (0.166 eV), and low open circuit voltage (0.136 V), outperforming a majority of MXenes and transition metal sulfide layers. This work offers a new strategy for designing desirable 2D layers from parental materials, and tuning their properties via composition and surface functionalization, which could shed light on the development of other 2D metal-ion anodes.
Two‐Dimensional Materials for Beyond‐Lithium‐Ion Batteries

Lele Peng,Yue Zhu,Dahong Chen,Rodney S. Ruoff,Guihua Yu

DOI: https://doi.org/10.1002/aenm.201600025

IF: 27.8

2016-01-01

Advanced Energy Materials

Abstract:Lithium‐ion batteries (LIBs) have dominated the portable electronics industry and solid‐state electrochemical research and development for the past two decades. In light of possible concerns over the cost and future availability of lithium, sodium‐ion batteries (SIBs) and other new technologies have emerged as candidates for large‐scale stationary energy storage. Research in these technologies has increased dramatically with a focus on the development of new materials for both the positive and negative electrodes that can enhance the cycling stability, rate capability, and energy density. Two‐dimensional (2D) materials are showing promise for many energy‐related applications and particularly for energy storage, because of the efficient ion transport between the layers and the large surface areas available for improved ion adsorption and faster surface redox reactions. Recent research highlights on the use of 2D materials in these future ‘beyond‐lithium‐ion’ battery systems are reviewed, and strategies to address challenges are discussed as well as their prospects.
Two-Dimensional Planar BGe Monolayer as an Anode Material for Sodium-Ion Batteries

Li Shao,Xiangyang Duan,Yan Li,Fanguang Zeng,Honggang Ye,Chuanxun Su,Pei Ding

DOI: https://doi.org/10.1021/acsami.1c08751

2021-06-21

Abstract:Using first-principles swarm intelligence structure prediction computations, we explore a fully planar BGe monolayer with unique mechanical and electrical properties. Theoretical calculations reveal that a free-standing BGe monolayer has excellent stability, which is confirmed by the cohesive energy (compared to experimentally synthetic borophene and germanene monolayers), phonon modes (no imaginary frequencies appeared in the phonon spectrum), ab initio molecular dynamics (AIMD) simulations (no broken bonds and geometric reconstructions), and mechanical stability criteria. The metallic feature of the BGe monolayer can be maintained after absorbing different numbers of Na atoms, ensuring good electronic conductivity during the charge/discharge process. The calculated migration energy barrier, open-circuit voltage, and theoretical specific capacity of the BGe monolayer are much better than those of some other two-dimensional (2D) materials. These findings render the BGe monolayer a potential candidate for reversible Na-ion battery anode materials with desirable performance.

materials science, multidisciplinary,nanoscience & nanotechnology
A metallic two-dimensional b-BS2 monolayer as a superior Na/K-ion battery anode

Zhifang Yang,Wenliang Li,Jingping Zhang

DOI: https://doi.org/10.1039/d3cp04506d

2024-02-14

Abstract:Two-dimensional (2D) materials with light weight and ultra-high electrical conductivity are expected to exhibit high capacity as anodes of batteries. We have explored the curved square lattice BS2 (b-BS2) monolayer possessing a space group similar to the transition metal chloride (space group: P4̄M2). The electrochemical performance of the b-BS2 monolayer as the anode for various metal-ion batteries (Li, Na, K, Mg, Ca, and Al) has been investigated. It exhibits low diffusion energy barrier, high theoretical capacity, and low open circuit voltage for Na/K-ion batteries (SIBs/PIBs). The ultrahigh energy densities of 2146.08 and 715.36 mA h g-1 can be achieved with the stoichiometries BS2Na6 and BS2K2, respectively. Furthermore, the b-BS2 monolayer may be synthesized on the surfaces of metal substrate materials (Ag(111), Al(111), and Au(111)). These results indicate that the b-BS2 monolayer is a good candidate for the anode material of SIBs/PIBs.

Metallic two-dimensional BP 2 : a high-performance electrode material for Li- and Na-ion batteries

Two-dimensional metallic BP as anode material for lithium-ion and sodium-ion batteries with unprecedented performance

Metallic VS 2 /graphene heterostructure as an ultra-high rate and high-specific capacity anode material for Li/Na-ion batteries

Investigation on novel two-dimensional BC 2 P monolayer: A promising anode with high theoretical capacity for Na-/Li-ion batteries

Anomalous High Ionic Conductivity of Nanoporous Β-Li3ps4

Metal-organic Framework Nanosheets-Guided Uniform Lithium Deposition for Metallic Lithium Batteries

Excellent Electrolyte Wettability and High Energy Density of B2S as a Two-Dimensional Dirac Anode for Non-Lithium-Ion Batteries

A Stable Metallic 3d Porous Bpc2 As A Universal Anode Material For Li, Na, And K Ion Batteries With High Performance

Two-dimensional MnBX monolayer as promising anode with record-high capacity and fast diffusion for Na-ion battery

Two-dimensional Metallic Pentadiamond As Anode Material for Li-/Na-/K-ion Batteries with High Performance

On two-dimensional metal borides (MBenes) as anode materials for metal-ion batteries: A first-principles study

Unveiling the Advances of 2D Materials for Li/Na-S Batteries Experimentally and Theoretically

Novel two-dimensional layered black phosphorus/nano-Si composites anode for Li-ion batteries

Two-dimensional 1T-PS2 as a promising anode material for sodium-ion batteries with ultra-high capacity, low average voltage and appropriate mobility

A New 3D Dirac Nodal-Line Semi-Metallic Graphene Monolith for Lithium Ion Battery Anode Materials

Theoretical prediction of two-dimensional metallic AM 2 B 8 (AM = K, Rb, Cs) as anode materials for Na-ion batteries

Sp2 Nanocarbon Materials for Lithium Ion Battery Applications

Top-down design of high-performance V-based MBene anode for Li/Na-ion batteries

Two‐Dimensional Materials for Beyond‐Lithium‐Ion Batteries

Two-Dimensional Planar BGe Monolayer as an Anode Material for Sodium-Ion Batteries

A metallic two-dimensional b-BS2 monolayer as a superior Na/K-ion battery anode