Abstract:To improve the stability of waterborne epoxy–acrylic emulsions and their comprehensive properties, such as the chemical resistance of coatings, a new research idea is proposed in this paper. First, a series of high-molecular-weight epoxy resins were synthesized with epoxy resin E-51 and bisphenol A (BPA) using benzyl triphenyl phosphine bromide as the catalyst. Then, free-radical graft copolymerization was carried out between the epoxy resin and methacrylic acid (MAA), styrene (ST), and butyl acrylate (BA) using benzoyl peroxide (BPO) as the initiator. This method ensured that the epoxy groups were retained. Finally, the carboxylic acid groups were neutralized with N,N-dimethylethanolamine (DMEA), and a stable aqueous epoxy–acrylic emulsion was obtained by high-speed dispersion in deionized water. The effects of key factors such as temperature, time, the molecular weight and dosage of epoxy resin, the dosage of MAA, the dosage of BPO, and the neutralization degree of the synthesis of emulsions and coating film properties were mainly discussed. The molecular weight and molecular weight distribution of the epoxy resin were determined by gel permeation chromatography (GPC). The epoxy resin and its graft copolymer were analyzed and characterized by Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The particle size and distribution of the emulsions were tested by laser particle size analysis. The morphology of the emulsion particles was observed by transmission electron microscopy. The results showed that the acrylic monomers (MAA, ST, and BA) were grafted onto the epoxy resin. The graft copolymers showed higher glass transition temperatures compared with those of the pure epoxy resin. TGA showed that the graft copolymer started to decompose at a high temperature before the pure epoxy resin did, and the thermal stability was slightly reduced. The prepared emulsions with a particle size of 160 nm had a storage stability of more than one year and showed excellent dilution stability, mechanical stability, and freeze–thaw stability. The emulsions were coated and cured at 150 °C for 1 h with a pencil hardness of 5 H, an adhesion of grade 1, and a flexibility of 1 mm. The water resistance was >60 days, the salt water resistance was >30 days, the acid resistance was >10 days, and the alkali resistance was >5 days.

Preparation and application of the water‐based acrylic self‐polishing resin: Good storage stability, good film‐forming matrix of marine antifouling coatings

Preparation and Performance of a Self-Produced High-Molecular-Weight Waterborne Epoxy–Acrylic Emulsion

Self-polishing emulsion platforms: Eco-friendly surface engineering of coatings toward water borne marine antifouling

Durable self-polishing antifouling coating based on fluorine-containing pyrrolidone amphiphilic copolymer-functionalized nanosilica

Lipophilic monomer tackifying hydrogel antifouling coatings prepared by soap free emulsion polymerization and its performance

Preparation and Characterization of the Cross-Linked Fluoro-Silicon Polyacrylate–Polyurethane Hybrid Emulsions for Superior Performance of Waterborne Coatings

Synthesis of zinc-based acrylate copolymers and their marine antifouling application

Facile Fabrication of Superhydrophobic Nanocomposite Coatings Based on Water‐Based Emulsion Latex

Efficient and Robust Coatings Using Poly(2‐methyl‐2‐oxazoline) and Its Copolymers for Marine and Bacterial Fouling Prevention

Synthesis and characterization of waterborne polyurethane‐based marine antifouling coating modified via glycerol laurate

A polyvinylpyrrolidone-based surface-active copolymer for an effective marine antifouling coating

Coatings with a self-generating hydrogel surface for antifouling

Mechanically Enhanced Self-Stratified Acrylic/Silicone Antifouling Coatings

Eco-friendly self-polishing antifouling coating via eugenol ester hydrolysis

Surface Hydrolysis-Anchored Eugenol Self-Polishing Marine Antifouling Coating

Seawater-triggered Self-Renewable Amphiphilic Coatings with Low Water Swelling and Excellent Biofilm Prevention Properties

Rapid curing and self-stratifying lacquer coating with antifouling and anticorrosive properties

Amphiphilic Marine Antifouling Coatings Based on a Hydrophilic Polyvinylpyrrolidone and Hydrophobic Fluorine–Silicon-Containing Block Copolymer

Characterization of silicon acrylic resin containing silica nanoparticles as candidate materials for antifouling and anticorrosion properties in seawater

Fluorine‐phosphate copolymerization waterborne acrylic resin coating with enhanced anticorrosive performance

Preparation and Characterization of Fluorinated Acrylate and Epoxy Co-Modified Waterborne Polyurethane