Stability and parameter sensitivity of a large-scale waste dump in China
Yukai Wang,Yanzhen Qiao,Guoliang Bai,Zhenwei Wang,Xiaoli Liu
DOI: https://doi.org/10.1088/1755-1315/861/6/062037
2021-10-01
IOP Conference Series: Earth and Environmental Science
Abstract:Waste dump stability has long been a major concern in open-pit mine production. This paper describes the landslide morphology in detail, based on a summary of the geological conditions of the Dagushan Waste Dump. The modified Mohr–Coulomb strength criterion, which is more suitable for the deformation and failure behavior of waste materials, was adopted based on the limit equilibrium theory to study waste dump stability under complex working conditions such as dumping, vibration, and basement softening, as well as the parameter sensitivity of the main influencing factors. The test results revealed that: (1) the safety factor of the Dagushan Waste Dump first decreased from 1.343 to 1.238 when the waste dump increased from +150 m to +201 m. Thereafter, it decreased from 1.238 to 1.129 because of the weakened basement of silty clay. Afterward, it decreased from 1.129 to 1.029 because of the toe excavation of the waste dump. Finally, the mechanical vibration at the slope toe made the safety factor of the waste dump change periodically every 6 s. The lowest safety factor of the waste dump under mechanical vibration was 0.747, which can eventually result in landslides. (2) The dump stability was moderately sensitive to the third-grade slope angle, basement cohesion, and mechanical vibration strength; however, it was highly sensitive to the third-grade slope height, basement friction angle, basement moisture content, and first-grade slope excavation angle. The dump stability decreased with an increase in the third-grade slope height and angle, basement moisture content, first-grade slope excavation angle, and mechanical vibration strength. The dump stability increased as the basement friction angle and basement cohesion increased. (3) Slope reshaping is proposed as a remedial measure because it was discovered to be effective in maintaining slope stability. These results can be used as a reference point for further dump stability studies.