A Multi-Porosity, Multi-Physics Model to Simulate Fluid Flow in Unconventional Reservoirs
Cong Wang,Yi Xiong,Zhaoqin Huang,Philip Winterfeld,Didier Ding,Yu-Shu Wu
DOI: https://doi.org/10.2118/182698-ms
2017-01-01
Abstract:Gas flow in shales is complicated by the highly heterogeneous and hierarchical rock structures (i.e., ranging from organic nanopores, inorganic nanopores, less permeable micro-fractures, more permeable macro-fractures, to hydraulic fractures). The dominant fluid flow mechanism varies in these different flow regimes, and properties of these rock structures are sensitive to stress changes with different levels. Although traditional single-porosity and double-porosity models can simulate certain time range of reservoir performance with acceptable accuracy, they are not generally applicable for the prediction of long-term performance and have limitations to improve our understandings of enhanced hydrocarbon recovery. In this paper, we present a multi-domain, multi-physics model, aiming to accurately simulate the fluid flow in shale gas reservoirs with more physics-based formulations. An idealized model has been developed for the purpose of studying the characteristic behavior of a fractured nanopore medium, which contains five regions: organic nanopores, inorganic nanopores, local micro-fractures, global natural fractures, and hydraulic fractures. Fluid flow governing equations in this model vary according to the different dominant fluid flow mechanisms in different regions. For example, the apparent permeability, which is the intrinsic permeability multiplied by a correction factor, is used to account for the gas slippage through nanopores of shale matrix; while the organic and inorganic nanopores in this matrix have different capacities for gas adsorption. On the other hand, for fluids flow in natural fractures and hydraulic fractures with high velocity, the non-Darcy flow model is used to capture the strong inertia when is comparable to viscous force. Numerical studies with practical interests are discussed. Several synthetic, but realistic test cases are simulated. Input parameters in these cases are evaluated using either the laboratory or theoretical work. Our results demonstrate that this model is able to capture the typical production behavior of unconventional reservoirs: a great initial peak, the sharp decline in the first few months, followed by a long flat production tail. A series of sensitivity analyses, which address the organic matter content, organic matter connectivity, natural fracture density, and hydraulic fracture spacing, will also be conducted.