Abstract:Multi-beam antenna systems are the basic technology used in developing fifth-generation (5G) mobile communication systems. In practical implementations of 5G networks, different approaches are used to enable a massive multiple-input-multiple-output (mMIMO) technique, including a grid of beams, zero-forcing, or eigen-based beamforming. All of these methods aim to ensure sufficient angular separation between multiple beams that serve different users. Therefore, ensuring the accurate performance evaluation of a realistic 5G network is essential. It is particularly crucial from the perspective of mMIMO implementation feasibility in given radio channel conditions at the stage of network planning and optimization before commercial deployment begins. This paper presents a novel approach to assessing the impact of a multi-beam antenna system on an intra-cell interference level in a downlink, which is important for the accurate modeling and efficient usage of mMIMO in 5G cells. The presented analysis is based on geometric channel models that allow the trajectories of propagation paths to be mapped and, as a result, the angular power distribution of received signals. A multi-elliptical propagation model (MPM) is used and compared with simulation results obtained for a statistical channel model developed by the 3rd Generation Partnership Project (3GPP). Transmission characteristics of propagation environments such as power delay profile and antenna beam patterns define the geometric structure of the MPM. These characteristics were adopted based on the 3GPP standard. The obtained results show the possibility of using the presented novel MPM-based approach to model the required minimum separation angle between co-channel beams under line-of-sight (LOS) and non-LOS conditions, which allows mMIMO performance in 5G cells to be assessed. This statement is justified because for 80% of simulated samples of intra-cell signal-to-interference ratio (SIR), the difference between results obtained by the MPM and commonly used 3GPP channel model was within 2 dB or less for LOS conditions. Additionally, the MPM only needs a single instance of simulation, whereas the 3GPP channel model requires a time-consuming and computational power-consuming Monte Carlo simulation method. Simulation results of intra-cell SIR obtained this way by the MPM approach can be the basis for spectral efficiency maximization in mMIMO cells in 5G systems.

An Analytical Representation of the 3GPP 3D Channel Model Parameters for mmWave Bands

3-D Statistical Channel Model for Millimeter-Wave Outdoor Mobile Broadband Communications

Statistical Channel Model with Multi-Frequency and Arbitrary Antenna Beamwidth for Millimeter-Wave Outdoor Communications

Performance Analysis of Multi-User MIMO Schemes under Realistic 3GPP 3-D Channel Model for 5G mmWave Cellular Networks

3-D Statistical Indoor Channel Model for Millimeter-Wave and Sub-Terahertz Bands

A Three-Dimensional Fully Polarized Millimeter-Wave Hybrid Propagation Channel Model for Urban Microcellular Environments

Millimeter Wave Channel Modeling and Cellular Capacity Evaluation

Subspace-based AOA estimation in mmWave NR system using power measurement with a single-port antenna array

Investigation and Comparison of 3GPP and NYUSIM Channel Models for 5G Wireless Communications

Reducing Computational Complexity for the 3GPP TR 38.901 MIMO Channel Model

Scalable and Accurate Modeling of the Millimeter Wave Channel

RCS-Based 3D Millimeter-Wave Channel Modeling Using Quasi-Deterministic Ray Tracing

Full-Stack End-To-End mmWave Simulations Using 3GPP and NYUSIM Channel Model in ns-3

On the Temporal Effects of Mobile Blockers in Urban Millimeter-Wave Cellular Scenarios

Modeling of Downlink Interference in Massive MIMO 5G Macro-Cell

Performance analysis of mmWave radio propagations in an indoor environment for 5G networks

Spatial and Temporal Channel Characteristics of 5G 3D Channel Model with Beamforming for User Mobility Investigations

Wideband Millimeter-Wave Propagation Measurements and Channel Models for Future Wireless Communication System Design

Channel Parameter Estimation for Millimeter-Wave Cellular Systems with Hybrid Beamforming

Analysis of 3GPP and Ray-Tracing Based Channel Model for 5G Industrial Network Planning

A Generalized Statistical Model for THz wireless Channel with Random Atmospheric Absorption