A double‐dynamic‐bond crosslinked multifunctional conductive hydrogel with self‐adhesive, remoldability, and rapid self‐healing properties for wearable sensing

Xinfeng Li,Tianyi Zhang,Baiqing Song,Kaili Yang,Xiaoqiong Hao,Jianhua Ma

DOI: https://doi.org/10.1002/pat.6267

IF: 3.348

2023-12-11

Polymers for Advanced Technologies

Abstract:In recent years, conductive hydrogels have been designed as flexible sensors with broad application prospects in the field of smart wearable devices. However, the coordination of the mechanical properties, self‐healing capability, and conductivity of hydrogels has always been a challenge. In this work, a multifunctional conductive hydrogel with self‐adhesive, re‐shapeable, and rapid self‐healing abilities (PB‐PACS‐PM3 (self‐healing efficiency) = 98.8% in 15 s) was prepared by incorporating protocatechualdehyde modified carboxymethyl chitosan (PA@o‐CMCS) and PDA‐modified MXene (PDA@MXene) into the interchain of polyvinyl alcohol through dynamic borate ester crosslinking. The dynamic Schiff base reaction not only effectively introduced o‐CMCS as a mechanical enhancer but also improved the viscoelasticity and self‐healing capability of the hydrogel through the dual dynamic bond crosslinking structure. The PDA@MXene nanosheets are uniformly distributed in the hydrogel, providing the composite system with excellent conductivity (the conductivity of PB‐PACS‐PM3 hydrogel is 1.5 S/m) and strain sensitivity (the response time and recovery time of the hydrogel sensor are 230 and 260 ms, respectively), while the tensile strength of the hydrogel is improved to 0.035 MPa. Due to all these advantages, this conductive hydrogel can be assembled into flexible wearable sensors for rapid and accurate monitoring of various physiological activities of the human body, such as finger, wrist, elbow, and knee bending vibrations, among others.

polymer science

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to design and prepare a multifunctional conductive hydrogel. This hydrogel has self - adhesiveness, re - moldability and rapid self - healing ability, and at the same time achieves a good coordination among mechanical properties, self - healing ability and conductivity. Specifically, the researchers introduced gallaldehyde - modified carboxymethyl chitosan (PA@o - CMCS) and polydopamine - modified MXene (PDA@MXene) into the polyvinyl alcohol (PVA) network, and prepared a multifunctional conductive hydrogel (PB - PACS - PM3) through dynamic borate ester cross - linking. This hydrogel not only has a high self - healing efficiency (98.8% self - healed within 15 seconds), but also exhibits excellent conductivity (1.5 S/m) and strain sensitivity (the response time and recovery time are 230 milliseconds and 260 milliseconds respectively), and its tensile strength reaches 0.035 MPa. These characteristics enable this hydrogel to be assembled into a flexible wearable sensor for rapidly and accurately monitoring various physiological activities of the human body, such as the bending and vibration of fingers, wrists, elbows and knee joints.

### Key problems solved
1. **Coordination of mechanical properties and conductivity**: Traditional conductive hydrogels are often difficult to have excellent mechanical properties and conductivity at the same time. In this paper, this problem has been successfully solved by introducing a double - dynamic - bond cross - linking structure.
2. **Self - healing ability**: The hydrogel may be damaged during use, and the self - healing ability can extend its service life. The hydrogel in this paper can reach a self - healing efficiency of 98.8% within 15 seconds.
3. **Self - adhesiveness**: Self - adhesiveness enables the hydrogel to better adhere to the skin or other surfaces, improving the stability and reliability of the sensor.
4. **Re - moldability**: Re - moldability enables the hydrogel to be shape - adjusted as needed to adapt to different application scenarios.

### Technical means
- **Double - dynamic - bond cross - linking**: Through the dynamic Schiff base reaction and dynamic borate ester bond cross - linking, a multi - level cross - linking network is formed, which improves the mechanical properties and self - healing ability of the hydrogel.
- **Introduction of MXene**: MXene, as a new two - dimensional conductive nanomaterial, is evenly dispersed in the hydrogel, providing excellent conductivity and strain sensitivity.
- **Material modification**: Using gallaldehyde - modified carboxymethyl chitosan (PA@o - CMCS) and polydopamine - modified MXene (PDA@MXene) further enhances the comprehensive performance of the hydrogel.

### Application prospects
This multifunctional conductive hydrogel has broad application prospects in the field of flexible wearable devices, especially in the fields of health monitoring, human - machine interaction, soft robots and electronic skin. Its high sensitivity and rapid response time make it an ideal wearable sensor material.