Abstract:The application and comparison of different fracture mechanics concepts are discussed to be used in computing stress intensity factors (SIF) from the numerical solutions of model crack theory problems with a mixed scheme of the finite element method. Approximation of displacements rests on piecewise-linear interpolation functions with triangular elements, and strain and stress distributions are approximated by the linear combination that includes the piecewise-linear interpolation and interior bell function. The latter ensures the stability and convergence of the approximate discrete problem solution. The solution results for linear elastic and elastoplastic model plane central mode I crack-strip tension problems under different loading and plane strain state conditions are presented. Elastoplastic calculations were made with an ideal elastoplastic material model. The application of the energy balance and G -integral concepts to the calculation of the specific work of fracture at the stationary crack tip is substantiated. It is shown that on condition of uniform plate partition in the vicinity of the crack tip, the application of those concepts to SIF calculation for one loading stage is consistent with the Irwin plastic zone correction, maintaining this approach in further mesh thickening. Elastoplastic calculations on repeated loading demonstrated that tensile stresses ahead of the crack tip were about the same as on the initial one, but the opening at the crack tip on the former was larger than on the latter, and this effect was most pronounced for the first half of active loading values. Several aspects of SIF calculations on repeated loading are presented.

A simple SIF determination method for cracked orthotropic cylindrical shell by means of stress ratio

A three-dimensional formula for determining stress intensity factors in finite element analysis of cracked bodies

Interaction between rectangular cracks embedded in infinite medium

An interaction integral method coupled with special crack tip elements for evaluation of stress intensity factors

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

A modified semi-weight function method for SIF calculation of arbitrary inclined interface crack with both single complex-root and double real-root singularities

A closed form expression of stress intensity factor for an arbitrarily shaped planar crack in 3-D under tensile loading

Weight Function of Stress Intensity Factor for Single Radial Crack Emanating from Hollow Cylinder

Direct Computation of 3-D Stress Intensity Factors of Straight and Curved Planar Cracks with the P-Version Finite Element Method and Contour Integral Method

Experimental Study on Stress Intensity Factor for an Axial Crack in a PMMA Cylindrical Shell

Simple Crack Tip and Stress Intensity Factor Determination Method for Model I Crack Using Digital Image Correlation

Three-dimensional weight function analyses and stress intensity factors for two eccentric and asymmetric surface cracks and surface-corner cracks at a circular hole

Mixed Scheme of the Finite Element Method as a Basis for Computational Analysis of Model Crack Mechanics Problems

SIF formula based on exact SIF distribution for semi‐elliptical surface cracks subjected to mode I, II, III uniform loading

Semi-empirical formulas on notch stress field and SIF of orthotropic V-shaped thin plate with initial crack under tensile-bending loads

A stress intensity factor estimation method for the kinked crack under anti-plane load

Calculation of stress intensity factor based on the extended finite element method

Numerical Simulation of Stress Intensity Factor under Multiaxial Loading

OS0916-211 Stress Intensity Factor Solutions for Subsurface Elliptical Cracks in Flat Plates Subjected to Polynomial Stress Distributions

Development of Stress Intensity Factors for Deep Surface Cracks in Pipes and Plates

Investigation of Stress Intensity Factors for an Interface Crack in Multi-Interface Materials Using an Interaction Integral Method