Abstract:The primary component of ultra-precision machining machines and measuring instruments is a high-precision spindle, and spindle error affects the accuracy of these machines. Traditional spindle error measurement methods often require a standard device as a reference, which inevitably reduces the accuracy of spindle error measurement, while the error separation technique is tedious and time-consuming. This study proposed a spindle error measurement method based on a composite laser target, which can measure the motion error of the spindle, including axial, radial, and tilt error in terms of five degrees of freedom. In this method, a composite laser target containing a laser point source and laser collimated beam was constructed and mounted on the spindle as a reference frame to mark the position of the spindle during rotation. Consequently, the error of the spindle was obtained via measurements of the position and angle of the composite laser target. Differential confocal microscopy technique was employed for measuring the axial position of the laser point source to obtain the axial error of the spindle, whereas the radial position was measured using a conventional microscope optical path to obtain the radial error of the spindle. Further, the angle of laser collimation was measured using a collimation measurement optical path to obtain the tilt error of the spindle. The measurement resolution of the proposed method for spindle error was verified through suitable experiments, yielding resolutions of 4 and 2 nm for axial and radial errors, respectively, and 0.2 grad in case of tilt error. In addition, the method was tested on an air spindle to demonstrate the feasibility of using the method on machines. Thus, it was demonstrated that the proposed method can be used to obtain the spindle error by optical standard devices without additional error separation techniques, particularly for a spindle in ultra-high precision measurement equipment. Further, it facilitates real time monitoring or evaluation and calibration of the spindle error. This method is expected to serve several important practical applications in the field of ultra-precision machining and measurement.

In Situ Measurement of Spindle Radial Error for Ultra-Precision Machining Based on Three-Point Method

Precision Measurement of Z -Slide Vertical Error Motion of an Ultra-Precision Lathe by Using Three-Probe Method

Error Separation Method For Precision Measurement Of The Run-Out Of A Microdrill Bit By Using A Laser Scan Micrometer Measurement System

An Improved Two-Point Real-Time Measuring Method for Radial Micro-Displacement Measurement on High-Speed Smart Boring Bar

Measurement and Analysis of the Radial Motion Error of Aerostatic Ultra-Precision Spindle

An Afm-Based Methodology for Measuring Axial and Radial Error Motions of Spindles

Measurement Method of Spindle Motion Error Based on Composite Laser Target

Research on the Integrated Process Method of In-Situ Measurement and Machining for the Mandrel of Aerostatic Spindle

An Adaptive Digital Filter Method for Measuring the Radial Error Motion of Ultra-Precision Spindle

A New and High Precision Measurement Method of Spindle Rotation Induced Error and Its Performance Research

Radial Error Motion Measurements at Nanometer-level Precision Using Angle Encoder with Different Four-scanning-heads Arrangements

A Calibration Ultrasound Method to Estimate Contact Characteristics at Spindle-Holder Interface

The Simulation on Dynamic Measurement of Spindle Error Motions of Ultra-precision Lathe

Measurement and Analysis for Frequency Domain Error of Ultra-Precision Spindle in a Flycutting Machine Tool

In Situ Measurement and Reconstruction Technology of Cylindrical Shape of High-Precision Mandrel

Measurement Of Spindle Rotation Induced Error Using The Cross Grid Encoder Test And Its Performance Research

Four-Point Method in the Measurement and Separation of Spindle Rotation Error

Radial gap measurement and manufacturing error evaluation for small hole machined by micro-EDM

A High Accuracy Method for the Field Dynamic Balancing of Rigid Spindles in the Ultra-Precision Turning Machine

An Online Spindle Rotation Error Measurement System Based on Improved Three Point Method

On-machine measurement of tool nose radius and wear during precision/ultra-precision machining