Abstract:Monolithic shape-stabilized phase change materials (ss-PCM) are of great interest for energy-saving construction materials, solar-water heating systems and passive cooling systems of batteries and photovoltaic cells. However, the application range of ss-PCMs is currently limited by either low mechanical stabilities or low heat storage capacities. Therefore, we recently developed ss-PCMs based on silica and butyl stearate (BS) with high compressive strengths (1.2 MPa, 10 °C), but only moderate latent heats (∼100 J/g). Here, we focus on validating the applicability of our porogen-assisted sol-gel process to other organic PCMs apart from butyl stearate. To increase the latent heat of ss-PCMs, we create a mixture of 70% hexadecane (HD) or octadecane (OD) with 30% BS and combine this PCM mixture with our novel-sol-gel route to synthesize ss-PCMs with high compressive strengths (1.2 MPa, 5 °C) as well as high latent heats (160 J/g). Due to the well-interconnected silica matrix confining the paraffins, the ss-PCMs have 70% higher thermal conductivities (0.43 W/mK, 5 °C) than pure paraffins, high shape-stabilities (∼100%), high PCM loadings (83 wt%), and high chemical and long-term stabilities (>3000 thermal cycles). Moreover, they are thermally stable up to ∼170 °C with PCM melting points of 17 °C and 22 °C. We also synthesize ss-PCMs with pure polyethylene glycol 600 (PEG600) and pure acetamide (Ac) to analyze the effect of non-paraffinic PCMs on the physicochemical properties of ss-PCMs. These ss-PCMs have a ∼30% lower latent heat than expected because the PCM either reacts strongly by hydrogen bonding with the silica (PEG600) or was chemically degraded under the basic conditions during gelation (Ac). In contrast to the low compressive strength of shape-stabilized PEG600 (35 kPa, 5 °C), the ss-PCMs based on Ac have high compressive strengths (9.6 MPa, 5 °C). Moreover, they are translucent above the PCM melting point due to a nanoscopic silica matrix. The high supercooling effect (37 °C) and the moderate long-term stability (3000 thermal cycles, 20% lower latent heat) of shape-stabilized Ac restrict its application to special, glassy materials.

Superhydrophobic Shape-Stable Phase-Change Materials Based on Artificially Cultured Diatom Frustule-Derived Porous Ceramics

Enhanced thermal conductivity of a superhydrophobic thermal energy storage coating based on artificially cultured diatom frustules

Biomass-based Shape-Stabilized Phase Change Materials from Artificially Cultured Ship-Shaped Diatom Frustules with High Enthalpy for Thermal Energy Storage

Hydrophobic composite phase change coating: Preparation, performance and application

Synergistic enhancement of phase change materials through three-dimensional porous layered covalent triazine framework/expanded graphite composites for solar energy storage and beyond

Fast Self-Healing Superhydrophobic Thermal Energy Storage Coatings Fabricated by Bio-Based Beeswax and Artificially Cultivated Diatom Frustules

Construction of layered double hydroxide-modified silica integrated multilayer shell phase change capsule with flame retardancy and highly efficient thermoregulation performance

Phase Engineered Composite Phase Change Materials for Thermal Energy Manipulation

Silica-based aerogels encapsulate organic/inorganic composite phase change materials for building thermal management

Solvothermal synthesis of porphyrin-ferrocenyl conjugated microporous polymer nanospheres for shape-stable phase change materials with improved latent heat and cyclability

Preparation and Characterization of Paraffin/Mesoporous Silica Shape-Stabilized Phase Change Materials for Building Thermal Insulation

Diatomite: A Promising Natural Candidate As Carrier Material for Low, Middle and High Temperature Phase Change Material

Series of solid-solid phase change materials with ultra-high thermal stability and controllable phase change temperature: kilogram-leveled preparation and application investigation

Green preparation and thermal properties of shape-stabilized paraffin/CS/SiO2 composite for phase change energy storage

Efficient Photothermal Anti‐/Deicing Enabled by 3D Cu 2‐x S Encapsulated Phase Change Materials Mixed Superhydrophobic Coatings

Preparation and thermal properties of shape-stabilized composite phase change materials based on paraffin wax and carbon foam

3D printing, leakage-proof, and flexible phase change composites for thermal management application

Cadmium Sulfide—Reinforced Double-Shell Microencapsulated Phase Change Materials for Advanced Thermal Energy Storage

Polystyrene Shell-Based "Coconut-Like" and "Pomegranate-Like" Microencapsulated Phase Change Materials: Formation Mechanism, Thermal Conductivity/Stability Enhancement and Their Application in Thermal Management

Shape-stabilization of organic phase change materials as mechanically stable silica boards with high latent heats synthesized via sol-gel route

Preparation and Performance of Shape-Stable Phase Change Materials Based on Carbonized-Abandoned Orange Peel and Paraffin