Abstract:Microbial fuel cells (MFCs) as green and sustainable energy sources have attracted much scientific and technological attention in the past two decades. However, the low extracellular electron transfer (EET) and poor bacterial adhesion are still the major bottlenecks in the development of MFCs with high power output. In this work, a two-dimensional Ti3C2 MXene was used as the anode and successfully started up the MFC after 1 day of inoculation with a bacterial mixture, giving an output voltage of 640 ± 8 mV with an external resistance of 1000 Ω and a maximum power density of 3.74 W m−2, which was much higher compared to the carbon cloth (CC) control (550 ± 8 mV and 2.05 W m−2). The enhancement in the MFC output performance is attributed to the multilayer structure, high surface area and excellent conductivity of Ti3C2 MXene, which can provide enough nutrition for microbial growth and fast mass transfer, as well as more active sites for biological catalytic redox reactions. Moreover, the direct EET between the Ti3C2/CC anode and the microorganisms was facilitated by the outer membrane cytochromes, a highly dense network of microbial nanowires and high concentration of extracellular polymeric substances (shortening the gap between the microorganism and the solid surface), thus effectively improving the MFC performance. The Ti3C2/CC anode generated 23% of the coulombic efficiency, higher than that of CC (18.6%). Both of the anodes exhibited high chemical oxygen demand (COD) removal efficiency (94.6% for Ti3C2/CC and 94.0% for CC) based on sodium acetate media.

Bio-carbon microtubules in microbial fuel cells for superior performance of 3D free-standing anode derived from Rhus Typhina

TiO2 Nanotube Arrays Modified Titanium: A Stable, Scalable, and Cost-Effective Bioanode for Microbial Fuel Cells

Enhancing Microbial Fuel Cell Performance with Free-Standing Three-Dimensional N-doped Porous Carbon Anodes

High‐Performance Carbon Anode Derived from Sugarcane for Packed Microbial Fuel Cells

Porous α-Fe2O3 nanofiber combined with carbon nanotube as anode to enhance the bioelectricity generation for microbial fuel cell

Porous -Fe<sub>2</sub>O<sub>3</sub> nanofiber combined with carbon nanotube as anode to enhance the bioelectricity generation for microbial fuel cell

Bio-electrocatalyst Fe3O4/Fe@C derived from MOF as a high-performance bioanode in single-chamber microbial fuel cell

Ti3C2 MXene as an excellent anode material for high performance microbial fuel cells

3D hierarchical porous carbon foams as high-performance free-standing anodes for microbial fuel cells

3D Hierarchical Co8FeS8-FeCo2O4/N-CNTs@CF with an Enhanced Microorganisms-Anode Interface for Improving Microbial Fuel Cell Performance

Nano-Fe3C@2D-NC@CC as anode for improving extracellular electron transfer and electricity generation of microbial fuel cells

Three-dimensional Graphene/pt Nanoparticle Composites As Freestanding Anode for Enhancing Performance of Microbial Fuel Cells

Carbon nanofiber/graphene hybrids anchoring Fe, N, S heteroatoms simultaneously enhancing extracellular electron transfer and biofilm adhesion in microbial fuel cells

The high enrichment of <i>Geobacter</i> by TiN nanoarray anode catalyst for efficient microbial fuel cells

High power density microbial fuel cell with flexible 3D graphene-nickel foam as anode.

Conductive Polypyrrole-Carboxymethyl Cellulose-Titanium Nitride/carbon Brush Hydrogels As Bioanodes for Enhanced Energy Output in Microbial Fuel Cells

Three-dimensional Carbon Nanotube-Textile Anode for High-Performance Microbial Fuel Cells.

High-performance free-standing microbial fuel cell anode derived from Chinese date for enhanced electron transfer rates

3D Macroporous Nitrogen‐Enriched Graphitic Carbon Scaffold for Efficient Bioelectricity Generation in Microbial Fuel Cells

Lysine-modified TiO2 Nanotube Array for Optimizing Bioelectricity Generation in Microbial Fuel Cells

Boosting bioelectricity generation in microbial fuel cells via biomimetic Fe-N-S-C nanozymes