Abstract:Carbon Fiber Reinforced Polymer (CFRP) is extensively utilized in the cutting-edge industries, attributed to its superior mechanical performances. The machining performance of CFRP, however, is significantly influenced by its pronounced anisotropy, particularly the fiber orientation. Consequently, Fiber Cutting Angle (FCA) is widely employed to assess the relationships between cutting geometry and machining performance, yet the coupling of cutting orientation and fiber orientation, along with the absence of feeding angle, limits the further exploration into the underlying mechanisms. This article introduced a novel geometrical framework termed "Cutting Geometry Space" (CGS), for modeling CFRP machining process. Incorporating feeding orientation, cutting orientation and fiber orientation, CGS is applied in milling process for an enhanced comprehension of cutting geometry. Additionally, a pragmatic milling experiment is designed, efficiently evaluating the performances of 1092 combinations of CGS parameters in 13 T700-12K/epoxy CFRP specimens. Microscopical observations and morphological analyses reveals four predominant fracture mechanisms in CFRP machining, with fiber-matrix debonding and bending-induced fracture identified as the key contributors to macroscopic cavity formation. A designated "Damage Zone" within the CGS, encompassing a cutting angle range of 90 degrees-270 degrees degrees -270 degrees and a fiber tilt angle of 15 degrees-60 degrees, degrees -60 degrees , is identified as a high-risk area for machining-induced surface cavities. Additionally, the impact of feeding orientation on the surface integrity is confirmed and explained by the influence on the equivalent FCA. Furthermore, the study elucidates chatter marks as a phenomenon induced by a confluence of factors, including generalized down milling, high FCA, and a significant effective cutting fiber count. The observed shift in chatter mark with varying feeding angles provides deep insights into the complex dynamics of machining parameters.

Investigation of the micro-cutting mechanism of T700 CFRP composites using ultra-thin dicing blade

Investigation on the Effects of Microstructure on Machining Unidirectional Carbon Fiber Reinforced Polymer Composites with a Modified Force Model

A Unified Geometrical Modeling and Analysis Method for Evaluating CFRP Machining Performance: Cutting Geometry Space

Research on CFRP cutting mechanism by the micro-textured tool using macroscopic and microscopic numerical simulations

Investigation of CFRP cutting mechanism variation and the induced effects on cutting response and damage distribution

Study on the formation mechanism of cutting surface of carbon fiber-reinforced composites

Factor Analysis of Machining Parameters of Fiber-Reinforced Polymer Composites Based on Finite Element Simulation with Experimental Investigation

Analytical modeling of cutting forces and investigation of the material removal mechanism in milling of HSF/PR composite

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

Research on Tool Wear and Surface Integrity of CFRPs with Mild Milling Parameters

Analysis of high temperature and mixed tool wear effects on UD-CFRP cutting mechanism in stacks drilling

Evaluation of heat generation using a microscopic cutting model with thermo-mechanical coupling for carbon fiber reinforced polymer composites

Investigating the material removal mechanism and cutting performance in ultrasonic vibration-assisted milling of carbon fibre reinforced thermoplastic

Experimental investigations of impact behavior and milling performance of T700-CFRP under cryogenic conditions

Tailoring fiber arrangement in subsurface damage layer of unidirectional CFRP composites by reverse multi-pass cutting

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

Numerical and experimental investigation of orthogonal cutting of carbon fiber-reinforced polyetheretherketone (CF/PEEK)

Temperature-dependent cutting physics in orthogonal cutting of carbon fibre reinforced thermoplastic (CFRTP) composite

Investigation on tearing damage of CFRP circular cell honeycomb in end-face grinding

Research on Subsurface Damage of CFRP Cutting with Biomimetic Gradient Micro-Textured Tools

Research on Multiscale Modeling and Experiment of CFRP Milling