Enhanced removal of Sb(V) by iron‐spent bleaching earth carbon binary micro‐electrolysis system: Performance and mechanism

Dongjin Wan,Heyu Wan,Yahui Shi,Jingnan Jin,Zhixiang Zhang,Junjie Lu
DOI: https://doi.org/10.1002/jctb.7431
IF: 3.709
2023-05-19
Journal of Chemical Technology and Biotechnology
Abstract:BACKGROUND In this work, the construction of the zero‐valent iron loaded spent bleaching earth carbon binary micro‐electrolysis system (Fe0/SBE@C) was firstly developed for Sb(V) removal in water. RESULTS Fe0/SBE@C at 4:1 of Fe to SBE@C mass ratio can obtain satisfactory Sb(V) removal and less Fe dissolution under acid (pH=3) and neutral (pH=7) conditions. Sb(V) removal by Fe0/SBE@C accorded with second‐order kinetic model. Activation energy of Fe0/SBE@C reaction for Sb(V) removal was 27.61 kJ/mol. Optimum reaction condition forecasted by the response surface method (RSM) was the dosage of 0.19 g/L, the temperature of 45 °C and initial pH of 4.0, contributing to Sb(V) removal of 98.2%. Clearly, SO42− and Cl− (as electrolytes) had not obvious effect on Sb(V) removal; CO32−, PO43− and SiO32− had the obviously inhibition likely due to iron passivation (pH > 10.5) and formation of precipitation (e.g., FeCO3, Fe(OH)2 and Fe2(SiO3)3); N2 atmosphere was more conducive to Sb(V) removal. CONCLUSION Sb(III) concentration in the solution was almost zero without adjusting the initial pH. It was deduced that Sb(V) removal in Fe0/SBE@C micro‐electrolysis system should be the combined results of the adsorption, coagulation, and electrochemical reduction. This article is protected by copyright. All rights reserved.
engineering, chemical,biotechnology & applied microbiology, environmental,chemistry, multidisciplinary
What problem does this paper attempt to address?