Abstract:Real-time kinematic (RTK) is a technique frequently utilized to provide real-time highly precise positioning services for mobile Internet-of-Things (IoT)-embedded terminals from intelligence appliances and smartphones to autonomous drones and self-driving vehicles. To fully utilize hardware resources, the internal GNSS chips or modules equipped in IoT terminals should satisfy the traits of energy efficiency and low computational complexity. As the number of global navigation satellite system (GNSS) increases, the continuous accumulation of high-dimensional rounding errors, the rough system model, and seriously distorted observations will result in divergence and considerable processing burden in the conventional Kalman filter (KF) process. Computational efficiency is significant in the reduction in the power consumption and intensifies the positioning performance of GNSS receivers. Here, a new filter strategy based on UD factorization, where U stands for the unit upper-triangular factor and D indicates the diagonal factor, is proposed for RTK positioning to enhance the numerical stability and reduce the computational effort. The equivalent principle was applied to turn double-difference (DD) observations into zero-difference (ZD) observations. Then, the UD-factorization-based Kalman filter (UD-KF) is proposed as a way to sequentially provide accurate real-time estimations of the filter states and variance–covariance (VC) matrix. Both static and dynamic tests were carried out with single-frequency data from a GPS to evaluate the performance of UD-KF. The results of the zero-baseline test show that UD-KF can obtain smaller RMS of the estimated parameters as the noise of DD observations was twice that of the ZD observations. A short baseline test showed that, compared to the regular filter approach with DD observations, UD-KF achieved a shorter computation time with a higher data utilization rate for both filtering and fixing stages, with an average improvement of 32% and 18%. Finally, a dynamic test showed that the UD-KF can avoid the undesirable effect of satellite changes. Therefore, compared to KF with DD observations, the UD-KF with equivalent ZD observations can enhance the robustness as well as improve the positioning accuracy of RTK positioning.

Backward smoothing for precise GNSS applications

Precise satellite-ground baseline determination

A nonlinear smoother for target tracking in asynchronous wireless sensor networks

Improved forward and backward adaptive smoothing algorithm

Position estimation using extended Kalman Filter and RTS-smoother in a GPS receiver

Adaptive Robust Least-Squares Smoothing Algorithm

RTS Smoother for GLMB filter

A Novel Smooth Variable Structure Smoother for Robust Estimation

Bearing-Only Target Tracking Using Cubature Rauch-Tung-Striebel Smoother

On-line Smoothing and Error Modelling for Integration of GNSS and Visual Odometry

Research on Improved Gaussian Smoothing Filters for SLAM Application

RTSNet: Learning to Smooth in Partially Known State-Space Models (Preprint)

Posterior linearisation smoothing with robust iterations

A Robust Vector-Tracking Loop Based on KF and RTS Smoothing for Shipborne Navigation

Robust Filtering Techniques for RTK Positioning in Harsh Propagation Environments

A Modified Smoothing Scheme for Water Current aided SINS/DVL Integration System

Sensor Fusion of GNSS and IMU Data for Robust Localization via Smoothed Error State Kalman Filter

A Sliding Window Filter With GNSS-State Constraint for RTK-Visual-Inertial Navigation

An ANN–RTS smoother scheme for accurate INS/GPS integrated attitude determination

An Efficient UD Factorization Implementation of Kalman Filter for RTK Based on Equivalent Principle

An Ambiguity-free Smoothing Algorithm for Multipath Mitigation in INS/RTK Tightly-Coupled Integration