Abstract:Summary The phase change material is currently being regarded as an effective cooling media to be applied in the thermal management of lithium batteries‐powered vehicles, in which the inorganic hydrate phase change material is desirable and widely investigated due to the high thermal conductivity, latent heat value, and low cost. However, when applied to thermal energy storage applications, supercooling and phase separation are problematic. To effectively circumvent this issue, this work considers utilizing the disodium hydrogen phosphate dodecahydrate as the matrix of the composite phase change material, as the phase transition temperature is suitable for the battery's operating temperature range. Meanwhile, the nucleating agent sodium metasilicate nonahydrate with similar lattice parameters and the thickener carboxymethyl cellulose are used to suppress the supercooling and eliminate the phase separation, respectively. Effects of nucleating agent, surface modified aluminum nitride, and short‐cut carbon fiber on the supercooling degree, and thermal conductivity and curing performance in the phase change material are evaluated and discussed in detail to determine the optimal preparation scheme for Na2HPO4·12H2O/modified AlN/CF inorganic composite phase change materials. Experimental results show that the addition of 4 wt% Na2SiO3·9H2O, 4 wt% CMC, 12 wt% modified AlN, and 6 wt% CF reduces the supercooling degree of the composite phase change material to 1.9°C and increases the thermal conductivity to 1.86 W/(m·K). The composite phase change material is found to have a suitable phase change temperature (35°C), high latent heat (249 J/g), excellent shaping effect, and electrical safety performance. In addition, the composite phase change material battery module can effectively control the battery's temperature, with the maximum temperature reduced by 40.9°C at 3C discharge rate and 30°C ambient temperature compared with the natural cooling battery module. The maximum temperature difference of the composite phase change material battery module is shown to be reduced to the minimum value of 0.9°C. Highlights A novel disodium hydrogen phosphate dodecahydrate—modified aluminum nitride—carbon fiber composite phase change material is designed and prepared for battery thermal management systems. The antiwater modification scheme of AlN is proposed and assessed. The effects of AlN before and after modification on the thermal properties of CPCM are compared. The joint use of nucleating agent sodium metasilicate nonahydrate and thermal conductive filler AlN contributes to significantly inhibiting the supercooling of hydrate salt. The addition of CF can effectively increase the thermal conductivity of CPCM and prevent its leakage. CPCM has suitable phase change temperature, high thermal conductivity and latent heat value, excellent electrical safety, and stable curing performance. The battery test bench is constructed and the discharge test of the CPCM battery module is carried out. The results show that the CPCM battery module has excellent cooling performance and temperature uniformity.

Nanoencapsulation of Silicon Carbide-Doped Hydrated Salt for Safe and High-Efficient Battery Thermal Management

Bidirectionally High Thermal Conductive Phase Change Materials with Arrayed Radially Oriented Boron Nitride Nanosheets for Battery Pack Thermal Management

Thermophysical Properties of a Novel Nanoencapsulated Phase Change Material

Anionic Aggregates Induced Interphase Chemistry Regulation Toward Wide-Temperature Silicon-Based Batteries

D-mannitol@silica/graphene Oxide Nanoencapsulated Phase Change Material with High Phase Change Properties and Thermal Reliability

Preparation and Characterization of n-Octadecane@SiO2/GO and n-Octadecane@SiO2/Ag Nanoencapsulated Phase Change Material for Immersion Cooling of Li-Ion Battery

Experimental design of paraffin/methylated melamine-formaldehyde microencapsulated composite phase change material and the application in battery thermal management system

Insight into the Implication of High-Loading Mechanical Force on the Mechanical Bond

Paraffin@SiO2 Microcapsules-Based Phase Change Composites with Enhanced Thermal Conductivity for Passive Battery Cooling

Enhancing the thermal transport property of eutectic lauric-stearic acid based phase change material with silicon carbide nanoparticles for usage in battery thermal management system

High thermal conductive and anti-leakage composite phase change material with halloysite nanotube for battery thermal management system

Heat transfer enhanced inorganic phase change material compositing carbon nanotubes for battery thermal management and thermal runaway propagation mitigation

Highly stable and nonflammable hydrated salt nanocapsules with inorganic-organic composite shell for sustainable building technology

LiNO 3 /NaCl nanocapsules with high thermal properties for medium-temperature thermal energy storage

Experimental investigation of aluminum nitride/carbon fiber‐modified composite phase change materials for battery thermal management

Hydrophilic Ultra‐fine SiC Nanowires Enhance the Performance of Hydrated Salt Phase‐Change Energy Storage Materials

High thermal storage capacity phase change microcapsules for heat transfer enhancement through hydroxylated-silanized nano-silicon carbide

Preparation and Application of Aluminum-Phenylphosphinate-Encapsulated Phase Change Materials for Thermal Management of Lithium-Ion Batteries

Theoretical prediction and experimental investigation on nanoencapsulated phase change material with improved thermal energy storage performance

Development of Macro-Encapsulated Phase-Change Material Using Composite of NaCl-Al2O3 with Characteristics of Self-Standing

Incorporating Copper and Carbon Nanotube Nanoparticles into Phase Change Materials for Enhanced Thermal Management in Batteries