A Wrinkle‐Enhanced Porous Poly(lactic Acid) Electret‐based Nanogenerator for Self‐powered Wireless Temperature Measurement Systems

Chaohai Li,Liang Qiao,Yuxuan Zhu,Fang Yu,Biaolin Peng,Zhong Lin Wang,Kailiang Ren
DOI: https://doi.org/10.1002/adsu.202300452
IF: 6.737
2023-12-06
Advanced Sustainable Systems
Abstract:This work presents biocompatible porous polylactide (PLA) film for electret‐based triboelectric nanogenerator (E‐TENG) application. To increase the output of the device, the E‐TENG and the poly(vinylidene fluoride)‐based piezoelectric nanogenerator (PENG) are combined to create a hybrid nanogenerator (NG) for energy harvesting applications. The data indicate that the maximum output power of the hybrid NG can reach 73.5 μW at 6 MΩ, which is 30.7% and 1.91‐fold higher than that of the PENG and the E‐TENG. The hybrid NG is used as a power source to drive a wireless temperature transmission system, which can receive a temperature transmission signal from 20 m away. Recently, electret‐based triboelectric nanogenerator (E‐TENG) showssignificant advantages for energy harvesting applications, including a largeelectric current and high output stability. Inthis investigation, porous biocompatible polylactide (PLA) film is prepared for E‐TENG applications. They found that thesurface potential of the porous PLA‐based bioelectret film is maintained at2.1 kV after 86 days of decay,. The measurement data from theE‐TENG‐based cantilever beam showed that the E‐TENG reached an open‐circuitvoltage (Voc) of 184 V and a short circuit current (Isc)of 22.4 μAat 13.8 Hz. Furthermore, the E‐TENG and the PVDF‐based piezoelectric nanogenerator (PENG) are combined to create a hybridNG for energy harvesting applications. The data indicate that the maximumoutput power of the hybrid NG reached 73.5 μWat 6 MΩ,which is 30.7% and 1.91‐fold higher than that of the PENG and the E‐TENG,respectively. The hybrid NG is used as a powersource to drive a wireless temperaturetransmission system, which can receive a temperature transmission signal from 20 m away. The advantages of biocompatibility,softness and ease of processing make the porous PLA film a great candidate forwearable devices applications.
materials science, multidisciplinary,green & sustainable science & technology
What problem does this paper attempt to address?