Abstract:The use of unmanned operations to monitor mining induced land subsidence is increasing. This study conducts a detailed comparative analysis of accuracy of measured ground deformation provided by Differential Interferometric Synthetic Aperture Radar (D-InSAR), Small Baseline Subset (SBAS), and Unmanned Aerial Vehicle (UAV) tilt photogrammetry with respect to levelling measurements. Based on such analysis we propose an integrated approach that combines multiple remote sensing methods to achieve a better global accuracy in the land subsidence monitoring in mining areas. Conducted at the Banji Coal Mine, this study collected subsidence data from April 10, 2021, to June 28, 2022, through D-InSAR, SBAS, and UAV techniques. After segmenting the subsidence basin into distinct zones, we qualitatively assessed each area with UAV-derived 3D models and quantitatively evaluated the precision of all applied techniques, benchmarking against leveling data. Our findings indicate that integrating D-InSAR, SBAS, and UAV technologies significantly enhances monitoring accuracy over any single method, demonstrating their combined effectiveness in different subsidence areas. Consequently, the synergistic integration of D-InSAR, SBAS, and UAV technologies, capitalizing on their complementary strengths, enables the achievement of intuitive, comprehensive, and high-precision monitoring of subsidence basins in mining areas.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to achieve more accurate and comprehensive surface subsidence monitoring in mine area surface subsidence monitoring by integrating D - InSAR (Differential Interferometric Synthetic Aperture Radar), SBAS (Small Baseline Subset method) and UAV (Unmanned Aerial Vehicle) tilt photogrammetry technology. Specifically, the paper aims to: 1. **Compare the accuracy of different technologies**: Through detailed comparative analysis of the accuracy of D - InSAR, SBAS and UAV technologies in surface subsidence monitoring, evaluate the applicability and accuracy of each technology in different subsidence areas. 2. **Propose an integrated monitoring method**: Based on the above - mentioned analysis, propose an integrated monitoring method combining multiple remote sensing technologies to improve the overall monitoring accuracy and coverage. 3. **Verify the effectiveness of the integrated method**: Through actual case studies, verify the monitoring effect of the proposed integrated monitoring method in different subsidence areas, especially by comparing it with traditional leveling data, and evaluate its reliability and effectiveness in practical applications. ### Background problems With the development of global industrialization, land subsidence caused by underground resource exploitation has become a serious global challenge. Especially in coal mining areas, land subsidence not only threatens the safety and property of residents, but also poses a major threat to the global ecological balance. Therefore, effective monitoring and prevention of mine area surface subsidence are particularly important. ### Limitations of existing methods At present, mine area surface subsidence monitoring mainly relies on GNSS (Global Navigation Satellite System) and traditional leveling measurement technologies. Although these methods are mature, they have the following limitations: - **Limited spatial resolution**: Unable to provide high - resolution subsidence data. - **Limited monitoring range**: Difficult to cover large - area, dynamically changing mine areas. - **High time and labor costs**: Require a large amount of human and time resources. ### Advantages of new technologies D - InSAR, SBAS and UAV technologies have the following advantages in mine area surface subsidence monitoring: - **D - InSAR**: Provides a wide monitoring coverage range and continuous spatial deformation data, and the theoretically achievable deformation accuracy can reach the centimeter or even millimeter level. - **SBAS**: Through multi - image and small - baseline strategies, effectively reduces errors and noise, and is suitable for monitoring progressive and continuous deformation processes. - **UAV**: Provides high - resolution three - dimensional terrain and structure data, and is especially suitable for monitoring complex terrains or urban environments. ### Research methods of the paper 1. **Data collection**: Conduct research in Banji Coal Mine in Bozhou, Anhui. Use Sentinel - 1A satellite data for D - InSAR and SBAS analysis, and use DJI Matrice 300 RTK UAV for tilt photogrammetry. 2. **Data processing**: Use SARscape software to process D - InSAR and SBAS data, and use Bentley ContextCapture software to process UAV data to generate digital surface models (DSM) and 3D models. 3. **Area division**: Divide the subsidence basin into the central subsidence area, the moderate subsidence area and the marginal subsidence area for monitoring and analysis respectively. 4. **Accuracy assessment**: Compare the monitoring results of D - InSAR, SBAS and UAV technologies with leveling data, evaluate the accuracy of each technology, and propose an integrated monitoring method. ### Conclusion By integrating D - InSAR, SBAS and UAV technologies, the paper significantly improves the accuracy and coverage of mine area surface subsidence monitoring. The research shows that this integrated method has a good monitoring effect in different subsidence areas, providing a new solution for efficient and accurate monitoring of mine area surface subsidence.

Integrated high-precision monitoring method for surface subsidence in mining areas using D-InSAR, SBAS, and UAV technologies

DEM Establishing Method of Mining Subsidence in High Underground Water Mining Area with UAV

A Novel Method of Monitoring Surface Subsidence Law Based on Probability Integral Model Combined with Active and Passive Remote Sensing Data

Mine Subsidence Monitoring Integrating DS-InSAR with UAV Photogrammetry Products: Case Studies on Hebei and Inner Mongolia

Deformation Monitoring and Spatiotemporal Evolution of Mining Area with Unmanned Aerial Vehicle and D-InSAR Technology

Integration of unmanned aerial vehicle (UAV)-based photogrammetry and InSAR for mining subsidence and parameters inversion: a case study of the Wangjiata Mine, China

Rapid monitoring of reclaimed farmland effects in coal mining subsidence area using a multi-spectral UAV platform

A simulation of mining subsidence and its impacts to land in high ground water area- An integrated approach based on subsidence prediction and GIS

Continues Monitoring of Subsidence Water in Mining Area from the Eastern Plain in China from 1986 to 2018 Using Landsat Imagery and Google Earth Engine

Monitoring Mining Surface Subsidence with Multi-Temporal Three-Dimensional Unmanned Aerial Vehicle Point Cloud

Deformation-Adapted Spatial Domain Filtering Algorithm for UAV Mining Subsidence Monitoring

Monitoring nonlinear large gradient subsidence in mining areas through SBAS-InSAR with PUNet and Weibull model fusion

Construction of Mining Subsidence Basin and Inversion of Predicted Subsidence Parameters Based on UAV Photogrammetry Products Considering Horizontal Displacement

High-precision monitoring and prediction of mining area surface subsidence using SBAS-InSAR and CNN-BiGRU-attention model

Ground subsidence monitoring in based on UAV-LiDAR technology: a case study of a mine in the Ordos, China

Retrieving Three-Dimensional Large Surface Displacements in Coal Mining Areas by Combining SAR Pixel Offset Measurements with an Improved Mining Subsidence Model

Improvement of Coal Mining-Induced Subsidence-Affected (MISA) Zone Irregular Boundary Delineation by MT-InSAR Techniques, UAV Photogrammetry, and Field Investigation

DInSAR Monitoring of Surface Subsidence by Fusing Sentinel-1A and -1B Data to Improve Time Resolution in a Mining Area

Reconstruction of Coal Mining Subsidence Field by Fusion of SAR and UAV LiDAR Deformation Data

Monitoring and Analysis of Ground Surface Settlement in Mining Clusters by SBAS-InSAR Technology

Study on subsidence monitoring technology using terrestrial 3D laser scanning without a target in a mining area: an example of Wangjiata coal mine, China