Abstract:Because of the higher delithiation capacity, Li5FeO4 (LFO) can be used as sacrificial prelithiation additive to compensate the initial capacity loss caused by the formation of solid electrolyte interphase in lithium-ion batteries (LIBs). However, the extremely poor air stability and severe phase transition after Li+ deintercalation make it difficult for LFO to be applied in prelithiation engineering practice. Herein, the residual alkali layer generated on the LFO due to air exposure is directly converted into a Li3PO4 layer by a one-pot solid–liquid reaction. The as-obtained surface phosphorylated LFO (LP-LFO) ensures high air stability and effective prelithiation capability. Introducing only 3 wt% LP-LFO to the LiFePO4/Li half-cell can maximally replenish the active Li+ loss and the initial coulombic efficiency, displaying a 9.9 % increase in the initial charge capacity. Moreover, the Li3PO4 coating enables LP-LFO to be a fast ionic conductor, not only inhibiting the phase transition of LFO, but also improving the electronic and ionic conductivity of the electrode, which is confirmed by the complementary tests of galvanostatic intermittent titration technique and electrochemical impedance spectroscopy, as well as the structure and morphology characterization. As a result, the LiFePO4/Li half-cell with LP-LFO additive exhibits a higher rate capability (144 mAh g−1 at 2 C) and cycle stability (157 mAh g−1 after 100 cycles at 0.1 C). And a 17.4 % increase in the discharge capacity and a 12.7 % increase in energy density after 200 cycles for the 3 wt% LP-LFO-added LiFePO4||graphite full cell is also achieved. This work provides a facile and efficient conversion strategy for the air-instable electrode additives, and furtherly broadens their industrial application prospect in high energy density LIBs.

LFO Modified Separator for the Initial Anode Irreversibility Compensation in Lithium-Ion Rechargeable Full Cells

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

Three-Dimensional Ordered Fevo4 Nanocatalyst-Modified Separator Enables Suppressed Polysulfides Shuttling and Boosted Redox Conversion in Li-S Batteries

Addressing the initial lithium loss of lithium ion batteries by introducing pre-lithiation reagent Li5FeO4/C in the cathode side

Separator engineering: Assisting lithium salt dissociation and constructing LiF-rich solid electrolyte interphases for high-rate lithium metal batteries

A Li+-Flux-Homogenizing Separator for Long-Cycle Li Metal Anodes

Lithium Magnesium Silicate Nanoparticles with Unique Cation Acceleration Channels as Li-ion Rectifiers for Stabilizing Li Metal Batteries

A Dual−Functional Cationic Covalent Organic Frameworks Modified Separator for High Energy Lithium Metal Batteries

Interfacial Fluoride Engineering Enabled Robust LiF-rich Solid Electrolyte Interphase to Reduce Active Lithium Loss in Rechargeable Lithium Battery

Modified Separator with a Composite Layer of LLZTO-PEO/PVDF-HFP/LiTFSI for Lithium-Ion Batteries

Functional Separator Enabled by Covalent Organic Frameworks for High‐Performance Li Metal Batteries

Upgrading the Separators Integrated with Desolvation and Selective Deposition toward the Stable Lithium Metal Batteries

Bifunctional separators design for safe lithium-ion batteries: Suppressed lithium dendrites and fire retardance

Surface Phosphorylated Li5FeO4 Prelithiation Additive Synergistically Improves the Air-Stability and Lithium-Ion Conductivity

Engineering the Li-ion flux and interfacial chemistry toward stable Li metal anode via a simple separator coating

Dual-function LiFePO4 modified separator for low-overpotential and stable Li-S battery

Integrating LiF-rich Solid Electrolyte Interphase and In-Situ Formed Gel Blocking Layer for Li–S Battery

A Solid-Electrolyte-reinforced Separator Through Single-Step Electrophoretic Assembly for Safe High-Capacity Lithium Ion Batteries

Functional Copolymer Derived Self‐Adapting LiF‐Rich Interphase Toward Deep Cycling Lithium Metal Batteries

Stable Lithium Plating and Stripping Enabled by a LiPON Nanolayer on PP Separator

A separator coated with commercial LiFePO4 and conductive carbon for Li-S battery of good cycling performance