Abstract:The gasification process is among the hydrogen production methods finding ever increasing application in the world practice. In its industrial implementation, a steam-oxygen mixture is employed most often as a gasifying agent. However, superheated steam is more promising for this purpose, since water is a hydrogen donor. It is essential to have an oxygen-free gasifying agent. This not only saves fuel eliminating its oxidation in the gasification process but also reduces the cost of synthesis gas (syngas) due to the fact that energy-consuming air separation units for oxygen production are not needed. Superheated steam for the gasification process can be generated at thermal power plants of various thermal and electrical power. This will enable the superheated steam to be generated at conditions in a wide range of temperatures and pressures and with high flowrates as required for gas generators with high specific thermal power. This process was modeled in the Aspen Plus software package widely used for simulation of chemical process and power systems in many countries of the world. The gasification process is generally modeled using the RYield or RGibbs reactor. The effect of superheated steam temperature (750–965°С) and pressure (0.1 to 3.0 MPa) of the syngas composition is demonstrated. Depending on the superheated steam pressure and temperature, the generated syngas can be used as a fuel for power units (in power industry) or as a feedstock for the production of various chemicals, such as hydrogen and synthetic liquid fuel. Comparison of the simulation results with the published data revealed that their difference does not exceed 15%.

Integrated plasma gasification and SOFC system simulation using Aspen Plus

Biomass Steam Gasification, High-Temperature Gas Cleaning, and SOFC Model: A Parametric Analysis

Modelling of an Integrated Plasma Gasification Combined Cycle power plant using Aspen Plus

Simulation Analysis of the System Integrating Oxy-Fuel Combustion and Char Gasification

Optimization of solid oxide fuel cell system integrated with biomass gasification, solar-assisted carbon capture and methane production

Simulation of a new biomass integrated gasification combined cycle (BIGCC) power generation system using Aspen Plus: Performance analysis and energetic assessment

Simulation of Eco-Friendly and Affordable Energy Production Via Solid Oxide Fuel Cell Integrated with Biomass Gasification Plant Using Various Gasification Agents

Energy, efficiency, and environmental analysis of hydrogen generation via plasma co-gasification of biomass and plastics based on parameter simulation using Aspen plus

Optimizing the operating conditions for hydrogen-rich syngas production in a plasma co-gasification process of municipal solid waste and coal using Aspen Plus

Applicability of the SOFC technology for coupling with biomass-gasifier systems: Short- and long-term experimental study on SOFC performance and degradation behaviour

Multi-physics field modeling of biomass gasification syngas fueled solid oxide fuel cell

Incorporation of solar-thermal energy into a gasification process to co-produce bio-fertilizer and power

Process modelling and thermodynamic performance optimization of biomass air gasification fuelled with waste poultry litter pellet by integrating Aspen plus with RSM

Biomass integrated gasification–SOFC systems: Technology overview

Comprehensive performance assessment of a novel biomass-based CCHP system integrated with SOFC and HT-PEMFC

Application of the Aspen Plus Software Package for Simulation of the Synthesis-Gas Composition in Oxygen-Free Steam Gasification of Biomass

A review on biomass derived syngas for SOFC based combined heat and power application

System Integration Study of Oxy-Biosyngas Combustion Based Metal Heating Process Using Aspen Plus

Techno-Economic Optimization of an Integrated Biomass Waste Gasifier–Solid Oxide Fuel Cell Plant

Computer simulation of a SOFC/GT hybrid system

Performance Analysis of Coal Gasification-SOFC Hybrid Systems