Abstract:Synchronous tidal current data are usually difficult to collect in regions disturbed by fishery activity, such as Sanmen Bay, China. Coastal Acoustic Tomography (CAT) is a promising technique to solve this problem, with which we measure tidal data can be recorded continuously even in busy coastal regions. To observe the tidal currents in Sanmen Bay using CAT, we set up seven CAT stations in the bay in September, 2009 (6th to 9th). The transducer was suspended at a depth of 3 similar to 5 m. Acoustic signals (5 kHz), modulated by the 10th order M sequence were transmitted synchronously every 3 min. Meanwhile, the transducer received transmission signals from the six other stations to obtain the reciprocal travel time of each station pair. At night, an Acoustic Doppler Current Profiler (ADCP) was deployed to measure the current velocity and so verify the CAT results. In addition, conductivity-temperature-depth (CTD) casts were performed to generate the sound-speed profile. Inverse analysis was performed to the travel-time differences between each station pair, to obtain the horizontal distribution of the tidal currents. The inverse solution was obtained by the tapered least squares method, and the weighting factor (appearing in the inverse analysis) was determined using the L-curve method. The travel-time differences of the 21 station pairs show a typical semidiurnal oscillation. However, some of the data are missing due to an instrument failure. This failure also affects the subsequent inverse analysis. Missing data are interpolated using values predicted by harmonic analysis. The mean root mean square difference (RMSD) between the raw data and the predicted values is 0.49 ms, which indicates that the predicted values are very close to the raw data. The time series of the velocity fields (obtained by the inverse analysis) shows that the tidal currents flow mainly along the channel, i.e., toward northwest during the flood tide and southeast during the ebb tide. The maximum northwestward and southeastward current velocities are 1.03 m . s(-1) and 1.09 m . s(-1), respectively. The harmonic analysis of the tidal currents shows that the semidiurnal tidal constituent (M2) is dominant. The semi major axes of its tidal ellipses are directed southeast-northwest. The residual currents flow mainly northwestward, with an average velocity of 0.05 m . s(-1) The time series of the volume transport across the peripheral transects of the observed region during 5 periods of M2 shows that the mean inflow volume transport across all transects is 4735 m(3) . s(-1). This inflow volume transport is approximately equal to the outflow of 4371 m(3) . s(-1) The current velocities obtained by the inverse method agree with those obtained using the ADCP. The RMSD between the two measurements of the eastward and northward velocity components are 0.18 m . s(-1) and 0.16 m . s(-1), respectively. Thus, using CAT, we measured the continuous distribution of tidal currents over an area of about 58 km(2) in Sanmen Bay. The tidal and residual current structures we obtained supported previous numerical modeling results. Furthermore, our data agreed better with ADCP measurements than that data from previous CAT experiments, because we used the harmonic analysis method to interpolate the missing travel-time difference data. Our study suggests that CAT is a powerful tool to map tidal current structures. In addition, CAT could play an important role in the environmental monitoring of Chinese coastal regions.

Observation of radial velocity along the Yangtze River based on sentinel-1A

An observational experiment of coastal acoustic tomography to map the structure of tidal currents in Sanmen Bay, China

An investigation of inversion method to measure the radial velocity of Kuroshio from Sentinel-1 SAR data

Extrapolation of electromagnetic pointing error corrections for Sentinel-1 Doppler currents from land areas to the open ocean

Sentinel-3 radar altimetry for river monitoring – a catchment-scale evaluation of satellite water surface elevation from Sentinel-3A and Sentinel-3B

Joint Inversion of Sea Surface Wind and Current Velocity Based on Sentinel-1 Synthetic Aperture Radar Observations

SBAS Time Series Analysis Technique Based on Sentinel-1 A TOPS SAR Images: A Case Study of Yellow River Delta

Assessment of Ocean Swell Height Observations from Sentinel-1A/B Wave Mode against Buoy In Situ and Modeling Hindcasts

Monitoring and spatial traceability of river water quality using Sentinel-2 satellite images

Detailed Detection and Extraction of Estuarine Tidal Channels with Multispectral and Full‐polarised SAR Remote Sensing

HF Radar Detected Water Wave Velocity over the Northern Jiangsu Shoal

Performance Assessment of a High-Frequency Radar Network for Detecting Surface Currents in the Pearl River Estuary

Estimating and Assessing Monthly Water Level Changes of Reservoirs and Lakes in Jiangsu Province Using Sentinel-3 Radar Altimetry Data

Characterization of suspended sand concentrations in the Yangtze River Estuary and adjacent waters

A New Approach for Ocean Surface Wind Speed Retrieval Using Sentinel-1 Dual-Polarized Imagery

Monitoring Total Phosphorus Concentration in the Middle Reaches of the Yangtze River Using Sentinel-2 Satellites

Synergistic Utilization of Spaceborne SAR Observations for Monitoring the Baltic Sea Flow Through the Danish Straits

Estimation of Suspended Sediment Concentration in the Yangtze Main Stream Based on Sentinel-2 MSI Data

Flood Monitoring in Rural Areas of the Pearl River Basin (China) Using Sentinel-1 SAR

Mapping coastal salt marshes in China using time series of Sentinel-1 SAR

Surface tidal currents in the open sea area to the east of the Zhoushan Islands measured with high frequency surface wave radar