Abstract:The use of general tensegrity systems that incorporate rigid bodies beyond axially loaded members has garnered increasing attention in practical applications. Recent preliminary studies have been conducted on the analysis and form design of general tensegrity systems with disconnecting rigid bodies. However, existing methods cannot account for connections between different rigid bodies. In practical applications, general tensegrity systems may have interconnected rigid bodies, rendering the analysis method proposed in previous studies inapplicable. To address this issue, this work proposes a comprehensive and unified analysis method for general tensegrity systems. The proposed formulation allows for the incorporation of connections between rigid bodies and general tensegrity systems with supports into the developed framework, enabling uniform analysis. Equilibrium and compatibility equations are derived through an energy approach combined with the Lagrange multiplier method. Self-stress states and mechanism modes are then computed based on these formulations. The stiffness of the mechanism mode is analyzed and validated using both the product force method and the reduced geometric stiffness matrix method. Furthermore, a self-stress design approach based on semi-definite programming (SDP) is proposed to determine feasible member forces that can stabilize general tensegrity systems. Illustrative examples are presented to verify the effectiveness of the proposed approach. This study expands the scope of the analysis theory for tensegrity systems and provides a fundamental and unified analysis approach that can be applied to any type of tensegrity system.

Stiffness properties of regular p-bars tensegrity prisms under the compressive loading

Shape optimization analysis of tensegrity structure

Structural Analysis for Deployable Space Truss with Twist Springs Activated

Strength optimization analysis of tensegrity structure by shape adjustments under restricted displacements

Research on a New Class of Planar Tensegrity Trusses Consisting of Repetitive Units

Research of a new triangular prism tensegrity plate structure

Self-Equilibrium, Mechanism Stiffness, and Self-Stress Design of General Tensegrity with Rigid Bodies or Supports: A Unified Analysis Approach

Numerical Modeling of Force-Stiffness Response of Cross-Linked Actin Networks Using Tensegrity Systems

Tensegrity Structures with Buckling Members Explain Nonlinear Stiffening and Reversible Softening of Actin Networks

The Equilibrium and Form-Finding of General Tensegrity Systems with Rigid Bodies

Ultimate Load-Carrying Capacity of Tensegrity Based on the Buckling of Struts

BENDING AND TWISTING ABOUT A CONSTRAINED AXIS OF Z-SECTION PURLINS WITH ONE SAG ROD AT MIDSPAN

Tensegrity rectangular planar truss structure

Topology Optimization of Tensegrity Structures Considering Buckling Constraints

Multi-Stable Tensegrity Structures

Study and application of tensegrity torus

Arranging the Plastic Hinges and Improving the Strength of Steel Tubes with Tapered Ends: Analysis and Tests

On the mechanical modeling of the extreme softening/stiffening response of axially loaded tensegrity prisms

Self-equilibrium analysis and minimal mass design of tensegrity prism units

Form-finding analysis of tensegrity structures using stiffness matrix method

Static properties of a new class of planar tensegrity truss