Abstract:Abstract Per recent analyses, in the near future, over half amount of the oil extracted globally will require some form of enhanced oil recovery (EOR) technique. Existing literature and historical investigations suggest that in oil reservoirs having viscosities between 10 — 150 m. Pa.s, there is a substantial prospective for tertiary recovery through the implementation of polymer flooding. For reservoir oil viscosities above 150 mPa.s, the polymer pumping efficiency goes down as polymer injectivity reduces significantly with increasing injection water viscosity that is used to attain a favorable mobility ratio at such high oil viscosities. To overcome this limiting factor, in this study, we propose the use of supramolecular assemblies (SMA) that have adjustable viscosity properties. Complex long-chain amino-amides and maleic acid are used to make these assemblies, which allow it to have reversible viscosity depending on the solution pH level. To maintain high injection efficiency, during pumping, SMA solutions will be kept at low viscosity values. On entry in deep reservoir or at oil contact phase, through introduction of an external stimulus, the viscosity of SMA solution will be reversed to a much higher viscosity. This will allow to sufficiently improve the mobility ratio. Preliminary results from lab-scale studies have indicated that along with reversibly adjustable viscosity property, SMA solutions are also tolerant to high temperatures and salt concentrations. Supramolecular solutions can be contemplated as remedy polymer systems, since unlike conventional polymers they disassemble and re-assemble when exposed to high temperature and stress conditions. In such conditions, conventional polymers generally undergo degradation. Additionally, through molecular scission processes SMA solutions can also be used in highly confining environments as well as in permafrost conditions and thin zones where conventional thermal techniques are not applicable. The objective of this work is the development of a novel SMA system that has the aforementioned properties of reversibly adjustable viscosity through pH, tolerance to high temperature and salt concentrations through desired interfacial properties. Lab-scale preliminary results have shown the potential economic benefits of the use of SMA solutions on a field-wide scale. Based on the results, it must be emphasized that SMA systems have a worldwide application in oil reservoirs for EOR purposes.

Rheological behaviors of a novel exopolysaccharide produced by Sphingomonas WG and the potential application in enhanced oil recovery

Synergistic effects of microbial polysaccharide mixing with polymer and nonionic surfactant on rheological behavior and enhanced oil recovery

Rheological Properties of a New Microbial Exopolysaccharide Produced by Sphingomonas sp . HS and Its Potential in Enhanced Oil Recovery

Next-Generation Gelling Agents for Improved Displacement in Enhanced Oil Recovery Processes

Comparative Study on Enhancing Oil Recovery under High Temperature and High Salinity: Polysaccharides Versus Synthetic Polymer

Synergistic effect of hydrophobic modified Welan gum and Sodium Alcohol Ether Sulphate in saline solution

Identification of the Key Enzymes in WL Gum Biosynthesis and Critical Composition in Viscosity Control

Viscosity and Structure Characterization of the 1-Bromohexadecane-Modified Welan Gum in the Saline Solution

Cost-Efficient Production of the Sphingan WL Gum by Sphingomonas sp. WG Using Molasses and Sucrose as the Carbon Sources

Effects of monosaccharide composition and acetyl content on the rheological properties of sphingan WL

Enzymatic degradation, antioxidant and rheological properties of a sphingan WL gum from Sphingomonas sp. WG

Glycerol-driven adaptive evolution for the production of low-molecular-weight Welan gum: Characterization and activity evaluation

The Function of β-1,4-Glucuronosyltransferase WelK in the Sphingan WL Gum Biosynthesis Process in Marine Sphingomonas sp. WG

Experimental Study on the Application of Cellulosic Biopolymer for Enhanced Oil Recovery in Carbonate Cores under Harsh Conditions

Optimization of welan gum extraction and purification using lysozyme and alkaline protease

Multi-supramolecular and double-network strategy improves rheological properties and oil displacement efficiency of polymers

Extraction, characterization, and evaluation of galactomannan from Barbatimão Verdadeiro as a potential additive for enhanced oil recovery fluids

Customized Modification of Welan Gum Properties Through Controllable Grafting of Acrylamide

Experimental Investigation of a Mechanically Stable and Temperature/Salinity Tolerant Biopolymer toward Enhanced Oil Recovery Application in Harsh Condition Reservoirs

Rheological properties and enhanced oil recovery performance of a novel sulfonate polyacrylamide

Characterization and Function of a Novel Welan Gum Lyase From Marine Sphingomonas sp. WG