Optimization on Removal of 2,4-Dichlorophenol by Sodium Carboxymethyl Cellulose Modified Nanoscale Pd/Fe Bimetal with Response Surface Methodology
Jinkui Zhong,Xinyue Zhou,Caiya Zhu,Yin Zhang,Jiawen He,Yuanhu Gao,Liguo Wang
DOI: https://doi.org/10.1016/j.dwt.2024.100216
IF: 1.1
2024-01-01
Desalination and Water Treatment
Abstract:2,4-dichlorophenol (2,4-DCP) is a toxic and harmful organic intermediate widely used in industrial production. Recently, the utilization of nano-zero-valent iron (NZVI) for 2,4-DCP treatment has gained significant popularity, but the deactivation and agglomeration of NZVI always appear and continue to present challenges. To address these issues, sodium carboxymethyl cellulose (CMC) and noble metal catalyst Pd are used as stabilizers to improve the removal efficiency of NZVI on 2,4-DCP. The CMC-modified nanoscale Pd/Fe bimetal (CMC-Pd/Fe) particles were prepared by the liquid phase reduction method and characterized by scanning electron microscopy (SEM), Fourier infrared spectroscopy (FTIR), and X-ray diffraction (XRD). The results showed that the addition of Pd and CMC succeeded in ameliorating the aggregation of NZVI. A five-level-four-factor central composite design (CCD) of response surface methodology (RSM) was used to optimize the removal of 2,4-DCP by CMC-Pd/Fe and explored the factors influencing the removal of 2,4-DCP, including the amount of catalyst, the initial pH of the system, the time of reaction, and the initial concentration of 2,4-DCP. A statistically significant and well-fitting quadratic regression model was successfully constructed to predict 2,4-DCP removal efficiency. The high F-value of 14.35, very low p-value (<0.0001), nonsignificant Lack of Fit, and appropriate coefficient of determination of 0.9399 demonstrate a good correlation between the experimental and predicted values of the proposed model. The analyses of variance reveal catalyst amount and reaction time have a positive effect on the removal efficiency of 2,4-DCP and the CMC-Pd/Fe catalyst amount shows the most apparent significance, with PC (percent contribution) greater than 26. Conversely, pH and 2,4-DCP concentration have a negative impact on the removal process. The optimum condition is 1.10g/L of catalyst amount, 5.63 of pH, 2.31h of reaction time, and 20mg/L of initial 2,4-DCP concentration. The validation results from parallel experiments showed that the average removal efficiency of 2,4-DCP reached 96.32% under the optimal conditions.