Abstract:Since disks, rotating or stationary, are integral in many thermal systems, such as rotating heat exchangers, thermoelectric coolers, solar energy systems, and geothermal plants, this study scrutinizes the thermohydrodynamics of rotating hybrid nanofluid flow over a stretchable disk at rest. Further, the shape of the nanoparticles and the choice of base fluid substantially impact the enhancement of the heat transfer rate in various such thermal systems. Therefore, the present investigation considers engineered colloids made of four distinct (sphere, cylinder, column, lamina) titania and copper nanoparticle shapes in two different base fluids: water and engine oil. The problem is formulated mathematically in an externally applied horizontal magnetic field and incorporating a non-Fourier heat flux model in the presence of solar radiation. Analogous to the case of the conventional vertical magnetic field, a similarity solution is also possible when magnetic forces act horizontally, both towards and opposite to the direction of rotation. Thus, the governing partial differential equations (PDEs) are first reduced to a set of highly non-linear and coupled ordinary differential equations (ODEs) via similarity transformations. These resulting set of ODEs are then solved numerically using a rapid and efficient spectral quasilinearization method (SQLM). Obtained results show that lamina-shaped TiO2−Cu / engine-oil hybrid-nanofluid is a better choice than the other shapes of nanoparticle suspension in water. The horizontally applied magnetic field exhibits a stronger influence on the flow and heat transfer characteristics when compared to a vertical magnetic field. Additionally increasing the thermal relaxation parameter αt from 0.1 to 0.35, the Nusselt number boost by 24.44%, 23.41%, 22.54%, and 17.93% for sphere, cylinder, column, and lamina nanoparticles of TiO2−Cu /water hybrid nanofluid. In the case of TiO2−Cu /engine-oil hybrid-nanofluid augmenting αt from 0.1 to 0.35, the Nusselt number rise by 23.95%, 22.83%, 21.82%, and 15.89% for sphere, cylinder, column, and lamina nanoparticles. Based on their increasing NS and Be values, the various shapes follow the sequence: lamina ¡ column ¡ cylinder ¡ sphere. Furthermore, entropy generation can be optimized through the augmentation of solar radiation factors QSR , δ , along with the reduction of the magnetic interaction parameter M , and by a proper selection of nanoparticle's shape. Interestingly, dual solutions are observed for the case of a shrinking disk, i.e., for S<0 , and a linear temporal stability analysis reveals that only one of these two branches, namely the first solution branch, is stable and the second branch unstable.

Thermohydraulic performance of magnetic nanoparticles via combined upstream and downstream swirl generators in solar heat exchanger tubes

The application of non-uniform magnetic field for thermal enhancement of the nanofluid flow inside the U-turn pipe at solar collectors

Thermo-hydraulic Investigation of a Heat Exchanger Tube Equipped with 3D-Printed Swirl Flow Generators

Swirl development and enhanced heat transfer analysis of ferrofluid in elliptical ducts under thermal-magnetic-flow fields coupling

Heat transfer analysis of hydromagnetic hybrid nanofluid (H2O) containing Ag–TiO2 nanoparticles in a slanted triangular enclosure with heated fins

Numerical Analysis of Natural Convection in an Annular Cavity Filled with Hybrid Nanofluids under Magnetic Field

Thermohydrodynamics of Bödewadt hybrid-nanofluid flow in a horizontal magnetic field

Thermal proficiency of magnetized and radiative cross-ternary hybrid nanofluid flow induced by a vertical cylinder

Effect of twist ratio on the thermal-hydraulic behavior of an aluminum oxide/cupric oxide nanofluid heat exchanger

Numerical Study of Heat Transfer Enhancement by Applying Magnetic Field on Nanofluid Flowing in Porous Medium

Thermal Analysis of MHD‐Modified Hybrid Nanofluid Flow Inside Convergent/Divergent Channel With Heat Generation/Absorption and Viscous‐Ohmic Dissipation

Numerical study on thermal–hydraulic characteristics in a inclined mini-channel for solar PV panel cooling with external magnetic field and magnetic nanofluid

Influence of the magnetic field on Al2O3-Cu/H2O hybrid nanofluid natural convection in a square cavity with heat sources and internal heat generation/absorption

Heat transfer and entropy generation analysis of water-Fe3O4/CNT hybrid magnetic nanofluid flow in a trapezoidal wavy enclosure containing porous media with the Galerkin finite element method

Thermal analysis of nanofluids flow in a double pipe heat exchanger with twisted tapes insert in both sides

Numerical study of the effects of geometric parameters and nanofluid properties on heat transfer and pressure drop in helical tubes

Simulation of magneto mixed convective flow and thermal behavior of hybrid nanofluid in a partially heated wavy cavity

Numerical investigation of the simultaneous effect of twisted tape and nanofluid hybrid in shell and spiral tube heat exchanger with a special design

Numerical investigation of heat and mass transfer in three-dimensional MHD nanoliquid flow with inclined magnetization

Thermal radiation, Soret and Dufour effects on MHD mixed convective Maxwell hybrid nanofluid flow under porous medium: a numerical study