Abstract:Reactor core components and structural materials of nuclear power plants to be decommissioned have been irradiated by neutrons of various intensities and spectrum. This long term irradiation results in the production of large number of radioactive isotopes that serve as a source of radioactivity for thousands of years for future. Decommissioning of a nuclear reactor is a costly program comprising of dismantling, demolishing of structures and waste classification for disposal applications. The estimate of radio-nuclides and radiation levels forms the essential part of the whole decommissioning program. It can help establishing guidelines for the waste classification, dismantling and demolishing activities. ORIGEN2 code has long been in use for computing radionuclide concentrations in reactor cores and near core materials for various burn-up-decay cycles, using one-group collapsed cross sections. Since ORIGEN2 assumes a constant flux and nuclide capture cross-sections in all regions of the core, uncertainty in its results could increase as region of interest goes away from the core. This uncertainty can be removed by using a Monte Carlo Code, like MCNP, for the correct calculations of flux and capture cross-sections inside the reactor core and in far core regions. MCNP has greater capability to model the reactor problems in much realistic way that is to incorporate geometrical, compositional and spectrum information. In this paper the classification of radioactive waste from the side structural components of a CANDU reactor is presented. MCNP model of full core was established because of asymmetric structure of the reactor. Side structural components of total length 240 cm and radius 16.122 cm were modeled as twelve (12) homogenized cells of 20 cm length each along the axial direction. The neutron flux and one-group collapsed cross-sections were calculated by MCNP simulation for each cell, and then those results were applied to ORIGEN2 simulation to estimate nuclide inventory in the wastes. After retrieving the radiation level of side structural components of in- and ex-core, the radioactive wastes were classified according to the international standards of waste classification. The wastes from first and second cell of the side structural components were found to exhibit characteristics of class C and Class B wastes respectively. However, the rest of the waste was found to have activity levels as that of Class A radio-active waste. The waste is therefore suitable for land disposal in accordance with the international standards of waste classification and disposal.

Safety Assessment of Introducing Radioactive Waste Incineration Facilities in Korea: An Off-site Resident Dose Evaluation

Radiological safety assessment for transportation of reactor pressure vessel during decommissioning of a nuclear power plant in Korea

Human Intrusion Dose Assessment for the Safe Disposal of Radioactive Spent Resin Mixed Waste at Disposal Facilities

Evaluation of Incinerator Performance and Policy Framework for Effective Waste Management and Energy Recovery: A Case Study of South Korea

Exposure to Hazardous Substances and Their Health Effects Among Residents Living Near Three Industrial Waste Incinerators in Korea

Global Radioactive Waste Disposal Trends and Prospects

Quantitative assessment of severe accident management strategies in a nuclear power plant

Safety Study on Korean Deep Geological Repository for High-Level Radioactive Waste: (1) Procedures for Conducting Risk Assessment

Radiological Safety Assessment for Deep Geological Disposal of High‐Level Radioactive Waste

Characterization of Radioactive Waste From Side Structural Components of a CANDU Reactor for Decommissioning Applications in Korea

Radiological environmental impact assessment for phosphate industry in Korea

Ammonia Emission Characteristics and Emission Factor of Municipal Solid Waste Incineration Plant

Environmental Impact of Solid Waste Treatment Methods in Korea

Reassessment of lower heating value calculations for municipal solid waste incineration facilities in South Korea

Environment Risk Assessment of Hazardous Waste Incineration

Applicability assessment of a plasma melting technology for a fly ash recycling system in the Republic of Korea

Evaluation on 14C emission patterns of various PWR types in South Korea and effectiveness of inventory reduction driving (IRD)

Sub-modeling numerical analysis on the radionuclide release from a transport cask submerged in the deep sea

Alternative Risk Assessment for Dangerous Chemicals in South Korea Regulation: Comparing Three Modeling Programs

Structural Changes to Nuclear Energy Industries and the Economic Effects Resulting from Energy Transition Policies in South Korea

Assessment of Radiation Doses to the General Public around Nuclear Power Plants Based on Representative Person Concept