Abstract:Increasing demand for electrochemical energy storage devices with high energy density, high power density, and long lifespan has posed significant challenges for developing suitable electrodes and electrolyte systems with fast charge transport kinetics and superior cycling stability. 1 As one of the promising electrode materials explored recently, MXenes (M n+1 X n T x ) are a group of two-dimensional transition metal carbides and/or nitrides, in which M is early transition metal, X presents C and/or N, T x stands for the surface groups such as =O, -OH, -Cl or -F. They exhibit excellent high-rate performance in electrochemical energy storage applications due to their unique properties: superior electronic conductivity (~15 000 S cm -1 ) and large interlayer spacing (~1 nm). 2 The charge storage mechanism and performance of the MXenes electrode is highly dependent on the electrode and electrolyte composition. For example, Ti 3 C 2 T x has shown rapid pseudocapacitive (de)intercalation of protons and transformation between the oxygen surface groups (=O) and hydroxyl (-OH) groups in acidic aqueous electrolytes. 3,4 As a result, Ti 3 C 2 T x exhibits an ultrahigh volumetric capacitance of 1500 F cm -3 in H 2 SO 4 electrolyte. 5 In less corrosive neutral aqueous electrolytes, the cation intercalation is accompanied by negligible charge transfer, leading to ultrafast charge storage. 6 Consequently, a moderate capacitance with superior cycling stability is reported in neutral electrolytes compared to acidic electrolytes. In contrast to dilute aqueous electrolyte, which has a limited electrochemical stability window (ESW), the highly concentrated water-in-salt (WIS) electrolyte possesses a large ESW (∼3.0 V) owing to the depressed activity of free water. Besides, the unique solvation structure of WIS electrolyte induces a novel intercalation of fully-solvated Li + at positive potential and increases the capacitance of MXene. 7 As a result, WIS electrolyte helps overcome the drawback of the low energy density of MXene in neutral aqueous electrolytes. In our research, we explored the impact of MXene structure and a novel electrolyte system on the pseudocapacitive performance of MXene. The charge storage behavior of Ti 3 C 2 T x in a molecular crowding electrolyte was explored. Interestingly, Ti 3 C 2 T x displayed one pair of redox peaks with low polarization, differing from both dilute neutral aqueous electrolyte and WIS electrolyte, which may be attributed to the intercalation of Polyethylene glycol (PEG)-solvated Li + cluster. The in situ X-ray diffraction are employed to better understand the charge storage process. We also constructed a MXene/polymer heterostructure with enlarged interlayer spacing. The unique heterostructure delivered a significantly enhanced rate performance in neutral aqueous electrolyte. (a high capacitance retention of 81% at 10 A g -1 ) Reference: Simon, P. & Gogotsi, Y. Nature Materials 7 , 845–854 (2008). Anasori, B. et al. Nature Reviews Materials 2 , 16098 (2017). Mu, X. et al . Advanced Functional Materials 29 , 1902953 (2019). Zhan, C. et al. J. Phys. Chem. Lett. 9 , 1223–1228 (2018). Lukatskaya, M. R. et al. Nat Energy 2 , 1–6 (2017). Ando, Y. et al. Advanced Functional Materials 30 , 2000820 (2020). Wang, X. et al . ACS Nano 15 , 15274–15284 (2021).

Modulating Electrochemical Energy Storage and Multi‐Spectra Defense of MXenes by Interfacial Dual‐Filler Engineering

Robust Liquid Metal Reinforced Cellulose Nanofiber/mxene Composite Film with Janus Structure for Electromagnetic Interference Shielding and Electro-/Photothermal Conversion Applications

Extreme Environment-Adaptable and Ultralong-Life Energy Storage Enabled by Synergistic Manipulation of Interfacial Environment and Hydrogen Bonding

High MXene loading, nacre-inspired MXene/ANF electromagnetic interference shielding composite films with ultralong strain-to-failure and excellent Joule heating performance

Modulation of Multifunctional Electric Dipoles on MXenes for Boosting Electromagnetic Interference Shielding

High-strength, Super-Tough, and Durable Nacre-Inspired MXene/heterocyclic Aramid Nanocomposite Films for Electromagnetic Interference Shielding and Thermal Management

Enhanced Electromagnetic Shielding and Thermal Management Properties in MXene/Aramid Nanofiber Films Fabricated by Intermittent Filtration.

Flexible MXene‐Based Composite Films for Multi‐Spectra Defense in Radar, Infrared and Visible Light Bands

Tough and Fatigue Resistant Cellulose Nanocrystal Stitched Ti3 C2 Tx MXene Films

Ultrafine cellulose nanocrystal-reinforced MXene biomimetic composites for multifunctional electromagnetic interference shielding

Ultrathin Films of MXene Nanosheets Decorated by Ionic Branched Nanoparticles with Enhanced Energy Storage Stability

Intercalating Ultrathin MoO3 Nanobelts into MXene Film with Ultrahigh Volumetric Capacitance and Excellent Deformation for High-Energy-Density Devices

Mechanically Robust ANF/MXene Composite Films with Tunable Electromagnetic Interference Shielding Performance

Toughness and high electromagnetic shielding CPM composite film with multi‐layer sandwich structure based on Mxene

High-Rate Electrochemical Energy Storage of MXene in Neutral Aqueous Electrolytes

Biomass-based porous carbon with surface grown MXenes for high-performance electromagnetic absorption and supercapacitor validated from structural and charge changes

Multi-interfacial bridging engineering of flexible MXene film for efficient electromagnetic shielding and energy conversion

Enhanced Oxidation-Resistant and Conductivity in MXene Films with Seamless Heterostructure

Facile Design of Flexible, Strong, and Highly Conductive MXene‐Based Composite Films for Multifunctional Applications

Multifunctional flexible, crosslinked composites composed of trashed MXene sediment with high electromagnetic interference shielding performance

Ultrastrong MXene films via the synergy of intercalating small flakes and interfacial bridging