Abstract:With increasing global energy demand and stricter environmental protection requirements, energy storage technology has become a research hotspot in the global energy field. New types of energy storage devices continue to emerge owing to the continuous development of cost-effective energy storage technology. Among them, potassium-ion batteries have received widespread attention as a new type of alkali metal ion battery because of their high capacity and low cost and are considered one of the future development directions. However, the research on potassium-ion batteries is still in its infancy, with many challenges to overcome regarding practical applications. A key factor affecting the performance of potassium-ion batteries is the anode material, as it not only affects the manufacturing costs but also directly affects the power density and energy density of the battery. Traditional anode materials for lithium-ion batteries cannot meet the requirements of potassium-ion batteries. Therefore, developing high-performance anode materials suitable for potassium-ion batteries is an important research direction at present. The charge and discharge rate and cycling life of potassium-ion batteries also need further improvements. Currently, the low-rate performance, short cycle life, and unsatisfactory practical capacities limit their practical application and commercialization. However, the future of potassium-ion batteries remains promising. Upon resolving the aforementioned issues, potassium-ion batteries will have diverse application prospects, such as electric vehicles, energy storage stations, and smart grids, providing important support for solving energy problems. Therefore, the research and development of potassium-ion batteries are an important direction in the global energy field. Current research efforts are primarily focused on exploring novel anode materials with exceptional ratability and cyclability. In this regard, we synthesized a new type of anode material based on bismuth telluride (Bi2Te3) and experimentally studied its applicability in potassium-ion batteries. The performance of Bi2Te3 anode for potassium-ion batteries has been limited by its structural instability and slow electrochemical reaction kinetics. In this study, rod-like Bi2Te3 was grown on accordion-like MXene, followed by P-doping to obtain a high-performance P-Bi2Te3/MXene superstructure. This novel anode had abundant Te vacancies and good self-auto adjustable function, providing excellent cycling stability (323.1 mAh·g-1 after 200 cycles at 0.2 A·g-1) and outstanding rate capability (67.1 mAh·g-1 at 20 A·g-1). Kinetic analysis and ex situ characterization indicate that the superstructure exhibits superior pseudocapacitive properties, high electrical conductivity, favorable diffusion capability, and reversible insertion and conversion reaction mechanism.

A High‐Rate and Ultrastable Re2Te5/MXene Anode for Potassium Storage Enabled by Amorphous/Crystalline Heterointerface Engineering

Encapsulating segment-like antimony nanorod in hollow carbon tube as long-lifespan, high-rate anodes for rechargeable K-ion batteries

Designing N-doped Graphene/rese2/ti3c2 MXene Heterostructure Frameworks As Promising Anodes for High-Rate Potassium-Ion Batteries

Defective 1T′-ReSe 2 nanosheets vertically grown on elastic MXene for fast and stable potassium ion storage

Ultralong Cycle Life for Deep Potassium Storage Enabled by BiOCl/MXene van der Waals Heterostructures

Strongly coupled Te-SnS2/MXene superstructure with self-autoadjustable function for fast and stable potassium ion storage

Anchoring Metal‐Organic Framework‐Derived ZnTe@C onto Elastic Ti3C2Tx MXene with 0D/2D Dual Confinement for Ultrastable Potassium‐Ion Storage

Orthorhombic Cobalt Ditelluride with Te Vacancy Defects Anchoring on Elastic MXene Enables Efficient Potassium‐Ion Storage

Preparation and Properties of P-Bi<sub>2</sub>Te<sub>3</sub>/MXene Superstructure-Based Anode for Potassium-Ion Battery

Achieving Stable and Ultrafast Potassium Storage of Antimony Anode via Dual Confinement of MXene@Carbon Framework

Heterostructures Assembled from Bi2O2CO3 and MXene for Boosted Potassium‐Ion Storage by Arousing the Built‐in Electric Field

Achieving Stable and Fast Potassium Storage of Sb2S3@MXene Anode Via Interfacial Bonding and Electrolyte Chemistry

A Stable Conversion and Alloying Anode for Potassium‐Ion Batteries: A Combined Strategy of Encapsulation and Confinement

Achieving High‐Performance 3D K+‐Pre‐intercalated Ti3C2Tx MXene for Potassium‐Ion Hybrid Capacitors Via Regulating Electrolyte Solvation Structure

Strongly Coupled 2D Transition Metal Chalcogenide-MXene-Carbonaceous Nanoribbon Heterostructures with Ultrafast Ion Transport for Boosting Sodium/Potassium Ions Storage

Covalently bonded MXene@Antimonene heterostructure anode for fast lithium-ion storage

3D Foam-Based MXene Architectures:Structural and Electrolytic Engineering for Advanced Potassium-Ion Storage

Homologous MXene‐Derived Electrodes for Potassium‐Ion Full Batteries

Building K-C Anode with Ultrahigh Self-Diffusion Coefficient for Solid State Potassium Metal Batteries Operating at -20 to 120 °C

First-principle Study of Ti2XS2 (X = C/N) MXenes As High Capacity Anodes for Rechargeable Potassium-Ion Batteries

Conductive Metal-Organic Framework with Superior Redox Activity As a Stable High-Capacity Anode for High-Temperature K-Ion Batteries