Abstract:In this article, a surface plasmon resonance (SPR) sensor based on photonic crystal fiber (PCF) is simulated and analyzed by finite element method (FEM). Gold and titanium oxide (TiO 2 ) are used as plasmonic layers. The TiO 2 layer is placed under the gold layer to increase the sensitivity of this sensor. The sensor's top and bottom surfaces are polished, and the plasmonic layer is placed on both these surfaces. Unlike sensors with typical external circular coating, less plasmonic material is used. Additionally, unlike internal coating sensors, there is no issue of partial air holes coating and achieving a uniform thickness of the plasmonic layer. Also using two plasmonic levels can expand the range of refractive index (RI) detection. The sensor's structure creates birefringence, allowing complete coupling between the core mode and both plasmonic layers. This results in more reliable detection ability. By optimizing the dimensions and arrangement of air holes and the sensor's structure, the ability to detect unknown analytes in the ultra-wide range of refractive index of 1.21–1.41 with the maximum wavelength sensitivity (WS) of 61,000 , the maximum amplitude sensitivity (AS) of 1294.29 , the maximum figure of merit (FOM) of 657.14 and the sensor resolution (SR) of 4.35 × 10 –6 have been obtained. This sensor operates in the visible to near-infrared wavelength range. During its design, feasibility in construction was taken into consideration, along with reducing the complexity and multiplicity of structural parameters. As a result, the sensor delivers excellent performance in detection parameters and is a suitable option for RI detection applications like organic chemicals and biosensing.

Numerical Analysis of High Sensitivity Refractive Index Sensor Based on Quad-Core PCF-SPR

Numerical Analysis of Highly Sensitive Twin-Core, Gold-Coated, D-Shaped Photonic Crystal Fiber Based on Surface Plasmon Resonance Sensor

Double-sided photonic crystal fiber (PCF) temperature and refractive index (RI) sensor based on surface plasmon resonance (SPR)

A Highly Efficient D-Shaped Dual-Core PCF-SPR Sensor Coated with ITO Film for Refractive Index Detection

A Highly Sensitive D-Shaped PCF-SPR Sensor for Refractive Index and Temperature Detection

Design and numerical analysis of a gold-coated photonic crystal fiber based refractive index sensor

Simultaneous Sensing of Temperature and Refractive Index with D-Shaped Photonic Crystal Fiber Infused with Liquid Crystal

High-Performance Gold-Nanowires-Coated PCF-SPR Sensor for Refractive Index Detection

Highly Sensitive Dual Channel PCF Based SPR Biosensor for Multi-Analyte Sensing

A High Sensitivity Refractive Index Sensor Based on Microstructure Fiber with Simple Structure and SPR Effect

A Refractive Index Sensor Based on PCF With Ultra-Wide Detection Range

Design and Simulation of High-Performance D-Type Dual-Mode PCF-SPR Refractive Index Sensor Coated with Au-TiO2 Layer

Dual-Core Photonic Crystal Fiber Plasmonic Refractive Index Sensor: A Numerical Analysis

Design and analysis of a high sensitivity open microchannel PCF-based surface plasmon resonance refractometric sensor

Highly Sensitive Twin Resonance Coupling Refractive Index Sensor Based on Gold- and MgF2-Coated Nano Metal Films

Refractive index sensing characteristics of PCF-SPR based on dual-plasmon materials

Modified D-type surface plasmon resonance (SPR)-based photonic crystal fiber (PCF) for application as a polarization filter and refractive index sensor

Highly sensitive refractive index sensor based on SPR with silver and titanium dioxide coating

Experimental study on ultra-high sensitivity gold-based SPR sensor for refractive index and temperature measurement

Highly sensitive dual-side polished SPR PCF sensor for ultra-wide analyte range in the visible to near-IR operating band

Design and Numerical Analysis of Refractive Index-Based Reproductive Hormone Sensor