Abstract:This study examines experimentally and numerically the thermo-mechanical behaviour of a novel Structural Insulated Panel (SIP) wall. The SIP UWall comprises of external cement boards and an internal core of expanded polystyrene and foamed concrete. Thermo-structural panels of size 600 × 2400 mm were first exposed to temperatures of up to 70 °C and flexo-compression to examine experimentally the behaviour of the novel SIP UWall vs traditional wall systems used in Southeast Asia, such as mon block walls, brick block walls, and lightweight block walls. The results indicate that the deflection of the SIP UWall was 42.0%, 23.8%, and 16.4% lower than that of traditional mon block, brick block, and lightweight block walls, respectively. To further assess the thermal performance of the above walls under real environmental conditions, four scale-down house units (1.5 × 1.5 × 2.4 m) were built in Chachoengsao province, Thailand. Results from the four scaled-down house units show that the use of SIP UWall reduced indoor temperatures by up to 5 °C compared to units constructed with mon block walls. Subsequently, the study proposes a novel approach to assess the thermo-mechanical behaviour of the panels using Fourier's law of heat transfer, Airy's stress function, and the principle of conservation of energy. The new approach explicitly considers the combined effect of applied thermal and mechanical loads. The approach is validated using the results obtained from the panel tests and the scale-down house units. It is shown that the proposed semi-empirical approach predicts well the thermo-mechanical behaviour on the wall panels tested in this study, with a Prediction/Experiment ratio of 1.06 and a Standard Deviation of 0.12. The tested wall panels and scaled-down hose units are subsequently modelled in Abaqus®. The results indicate that the SIP UWall exhibited superior thermal performance in terms of heat absorption, surpassing the mon block, brick block, and lightweight block panels by 19.4%, 15.7%, and 10.8%. The small errors in the Abaqus® predictions (always < 5%) indicate that the modelling approach adopted in this study was sufficiently accurate to simulate the thermal behaviour of the tested wall panels. This study contributes towards developing better assessment models and more energy-efficient construction materials in Southeast Asia.

Reinforcement of Traditional Wood-Frame Tabique Walls Using Wood-Based Panels

LATERAL RESISTANCE OF LIGHTWEIGHT WOOD AND BAMBOO SHEAR WALLS

Lightweight Woodframe Shear Walls with Ply-Bamboo Sheathings

Bamboo Lightweight Shear Walls: Modeling and Identification of Sheathing-to-Framing Connections for Seismic Response Analysis

Lateral Loading Performance of Lightweight Glubam Shear Walls

Thermal Insulation Performance of Bamboo- and Wood-Based Shear Walls in Light-Frame Buildings

Experimental Studies of Light-Weight Woodframe Shear Walls with Ply-Bamboo Sheathing Panels

Seismic Behavior of Cold-Formed Steel Frame Shear Walls Sheathed with Ply-Bamboo Panels

Sectional Strength and Design of Double-Skin Composite Walls Withre-Entrant Profiled Faceplates

In-Plane Shear Behavior of Unreinforced Masonry Wall Strengthened with Bamboo Fiber Textile-Reinforced Geopolymer Mortar

Lateral Force Resistance Performance of Sheathing Sandwiched Wood Shear Walls

Shear resistance for lateral force of light-frame wall sheathed with structural particleboard (PB)

Enhancing the In-Plane Behavior of a Hybrid Timber Frame-Mud and Stone Infill Wall Using PP Band Mesh on One Side

Seismic behavior of innovative hybrid CLT-steel shear wall for mid-rise buildings

Combined Strengthening Techniques to Improve the Out-of-Plane Performance of Masonry Walls

Comportamiento mecánico de muros de corte de Eucalyptus grandis: Resultados experimentales versus el criterio de las normas europeas

Stiffness of Experimentally Tested Horizontally Loaded Walls and Timber-Framed Modular Building

Lateral shear performance of sheathed post-and-beam wooden structures with small panels

Inspection and structural assessment of traditional timber floors: a practical systematization

Analysis of asymmetric high-performance structural insulated panels for load-bearing walls

Thermo-Mechanical Behaviour of a New SIP Wall Under Axially Compressive Load