Abstract:The shape memory properties of thermoplastic polyurethane (TPU)/polycaprolactone (PCL) based blends were studied. In the literature, most two-way shape memory polymers under stress-free conditions were prepared using single polymer or copolymer networks, and rare studies focused on the simple elastomer/plastic blend systems, particularly on the solvent vapor-triggered cases. For the two-way shape memory effect (SME), the entropy-induced elongation was found to be quite significant, not just the crystallization-induced elongation for the developed blends under large external load. Regarding vapor-triggered TPU/PCL blends (polar/polar blends) exposed to THF and n-hexane, the selected TPU showed a slightly better affinity to THF than PCL resins. However, both resins exhibited fewer affinities to n-hexane. Interestingly, the bent TPU sample expanded first, instead of shrinking, on exposing THF vapor. Unfortunately, the reversible behavior was not perceived after exposure to the air. However, with the addition of PCL, most TPU/PCL blends remarkably demonstrated the reversible shrinking/expanding behavior on exposure to the THF/air environment. This observation can't be explained by the simple gradient swelling/crystallization mechanism described in the literature. In overviewing our previous blends with different combinations in polarity on exposing the selective vapors, we propose a competing swelling/internal stress mechanism, that the dominant forces between solvent expansion/shrinkage through the (gradient) swelling effect and solvent-induced contraction/drying-induced elongation through the internal stress effect in the typical two-way shape memory behavior played an important role. To the best of our knowledge, this is the first study to comprehensively outline the possible competing factors to justify this interesting contrast in their solvent vapor-triggered reversible shape memory behavior for those blends. This simple blending method reveals numerous potentials to prepare multi-triggered two-way shape memory polymer blends.

Solvent Content Controlling Strategy for Co‐Crystallizable Polyesters Enables A Stress‐free Two‐Way Shape Memory Effect with Wider Service Temperatures

Effect of Monomer Structure on Crystallization and Glass Transition of Flexible Copolyesters

Synthesis and Thermomechanical and Rheological Properties of Biodegradable Long-Chain Branched Poly(Butylene Succinate-Co-Butylene Terephthalate) Copolyesters

Ultra-high Stretchability and Shape Fixation Rate Shape Memory Polyurethanes Based on Cyclic Polytetrahydrofuran Molecular Rings

Structural tuning of polycaprolactone based thermadapt shape memory polymer

CONTROLLED RELEASE OF SALICYLIC ACID FROM ELECTROSPUN MATS OF POLY(Ε-CAPROLACTONE) WITH LOW CRYSTALLINITY

Solvent‐Dependent Sequence‐Controlled Copolymerization of Lactones: Tailoring Material Properties from Robust Plastics to Tough Elastomers

A novel multi-triggered reversible shape memory thermoplastic polyurethane (TPU)/polycaprolactone (PCL) blend

Tunable Shape-Memory Behaviors in Amorphous Polymers Through Bound Solvent

Influence of Cross-Linking and Crystalline Morphology on the Shape-Memory Properties of PET/PEN/PCL Copolyesters Using Trimesic Acid and Glycerol

A Triple Shape Memory Material of Trans‐Polyisoprene/Polycaprolactone with Customizable Response Temperature Controlled by Crosslinking Density

Shape Memory Properties of Polycaprolactone-Based Polyurethanes Prepared by Reactive Extrusion

Scalable Preparation of Complete Stereo-Complexation Polylactic Acid Fiber and Its Hydrolysis Resistance

Synthesis and Characterization of High Temperature Cyanate-Based Shape Memory Polymers with Functional Polybutadiene/acrylonitrile

Sequence-Rearranged Cocrystalline Polymer Network with Shape Reconfigurability and Tunable Switching Temperature.

Facile and efficient formation of stereocomplex polylactide fibers drawn at low temperatures

Preparation and characterization of POSS-crosslinked PCL based hybrid materials

Promoting the formation of stereocomplex crystal in PLLA/PDLA by crosslinking restricted phase separation and solid-state stretching induced orientation

Two-Way Reversible Shape Memory Polymers Made of Cross-Linked Cocrystallizable Random Copolymers with Tunable Actuation Temperatures

Effect of Self-Nucleation and Stress-Induced Crystallization on the Tunable Two-Way Shape-Memory Effect of a Semicrystalline Network

Preparation and Characterization of High Melt Strength Thermoplastic Polyester Elastomer with Different Topological Structure Using a Two-Step Functional Group Reaction