Abstract:Falling liquid film is widely practiced in industrial applications, and its flow characteristics can be investigated more deeply by 3-D measurement. However, few research can perform high-accuracy 3-D measurements due to the lack of access to interface velocity. Based on the scanning laser-induced fluorescence (SLIF) and similar image retrieval methods, an advanced velocity measurement method named transcendence encounter is introduced. Combined with the contour interpolation algorithm based on inverse distance transformation, dynamic image interpolation is proposed to accomplish slice image interpolation with different interpolation numbers. Moreover, the marching cubes method is utilized for the 3-D liquid film reconstruction. Coupled with the slice volume summation based on integration principle and the velocity difference between the scanning laser and the falling liquid film, an advanced flow rate measurement method is proposed, which is verified with the mean absolute percentage error (MAPE) of 2.89%. Subsequently, the morphological characteristics and radial distribution of falling liquid film under the different flow conditions are analyzed, and the essence of flow regime transition is revealed quantitatively. The results show that the generation of 3-D waves and the increase of their size and frequency promote the transition from turbulent flow regime to fluctuating turbulent flow regime. In addition, the instantaneous flow rate is investigated, and the positive correlation to interface velocity is determined by investigating the joint distributions of these two parameters. Finally, according to the average liquid film thickness measured by the 3-D measurement method with high accuracy, the existing prediction models are evaluated and a new prediction model is established. The validation results are within ±6% and the MAPE is 2.10%, which demonstrates the better performance of the new prediction model. These 3-D measurement methods and research findings provide new solutions for further understanding the flow characteristics.

Liquid film flow rate from measurements of disturbance wave characteristics for applications in thin film flow

Measuring Flow Velocity Distribution in Microchannels Using Molecular Tracers

Cross-sectional Phase Distribution Measurement of Slug Flow in Small Channels

2D fringe probing of liquid film dynamics of a plug bubble in a micropipe

Online Parameters Measurement of Taylor Flow in Small Channels Using Optical Technique

Experimental and Numerical Investigation on Gravity-Driven Film Flow over Triangular Corrugations

Automated optical liquid film thickness measurement method

A novel laser interferometric method for thin film thickness measurement in gas-liquid intermittent flow

Liquid film characteristics measurement based on NIR in gas–liquid vertical annular upward flow

Simultaneous temperature and thickness measurements of falling liquid films by laser-induced fluorescence

Measurement of 3-D Characteristics of Falling Liquid Film Based on SLIF

Measurements of liquid film and droplets of annular two-phase flow on a rod-bundle geometry with spacer

Falling liquid film thickness measurement by an optical-electronic method

The Liquid Film Behaviors Created by an Inclined Jet Impinging on a Vertical Wall

Liquid film parameter measurement based on thermal distribution sensor in horizontal annular flow

Application of Very High Speed Camera in Measurement of Liquid Film Flow on Nuclear Rod Bundle in Micro-Scale

Measurement of Circumferential Liquid Film Based on LIF and Virtual Stereo Vision Sensor

Liquid films falling down a vertical fiber: modeling, simulations and experiments

Characteristics of Gas-Liquid Slug Flow in Microchannel by Instantaneous Liquid Film Thickness Measurement

Liquid Flow Measurement Using Phase Isolation and an Imaging Method in Horizontal Gas–liquid Two-Phase Flow

Fringe Probing of Gas-Liquid Interfacial Film in A Microcapillary Tube