Abstract:In this paper, a novel magnetorheological (MR) damper working in the squeeze-valve bi-mode of MR fluid (MRF) was developed. The damper was consisted of two parts: the valve part and the squeeze part. Both of the two working parts could provide damping force when the damper worked. Firstly, the model of the novel damper was established to ensure that the damper structure was suitable for our design. Then, the magnetic field distribution inside the MR damper was simulated. The simulated results showed that the magnetic flux density was 120 mT when the current in the coil was 2.0 A, and the magnetic field distribution was uniform at the working area of the MRF. The magnetic flux density inside the damper could be controlled by changing the current in the coil. Finally, the damper was fabricated and its mechanical properties were tested by the universal testing machine (MTS 809). The influences of the displacement, frequency, current, and velocity on the damping force were systematically analyzed. The test results indicated that the largest damping force provided by the MR damper was about 6.5 kN. The curves of the damping force versus displacement were plump, which indicated that the ability of the damper to expend energy was well. The effective damping increased from 31.5 to 620 kNs m(-1) when the current increased from 0 to 2 A. The results indicated the properties of the damper could change in a huge range. To analyze the semi-active control performance of the damper, the back propagation neural network was trained to predict the damping force. The predicted results matched well with the experimental results, which indicated that this novel MR damper had great potential in the semi-active control field.

Shape optimization of magnetorheological damper piston based on parametric curve for damping force augmentation

Experimental Investigations on the Nonlinear Dynamics of Magnetorheological Dampers

Optimal Design of Magnetic System for the Magnetorheological Intelligent Damper

Design and optimization of a magnetorheological damper based on B-spline curves

Simulation on Hysteresis Characteristic of Squeeze Mode Magneto-Rheological Damper Based on Non-Convex Constitutive Relation

Modeling and Experiments Study of Inverse Magnetostrictive Effect for a New Kind of Passive Adaptive MR Damper

Dynamic Characteristics and Modeling of A New Magnetorheological Damper for Broadband Vibration Control

Magnetorheological damper with multi-grooves on piston for damping force enhancement

Research On Dynamic Characteristics Of A Magnetorheological Damper With Decoupling Mechanism

Research on Improved Magnetorheological Damper for Wide-Band Vibration Control

Multi-objective Optimization Design of a Magnetorheological (MR) Fluid Damper Using a Genetic Algorithm

Analytical Modeling and Optimal Design of a MR Damper with Power Generation.

Mechanical performance of a novel magnetorheological fluid damper based on squeeze-valve bi-mode of MRF

A ROUTE TO DESIGN ROTARY MAGNETORHEOLOGICAL DAMPERS

Development and characterization of a magnetorheological damper with low-velocity sensitivity

Experimental Investigation on the Dynamic Behavior of A Disk-Type Damper Based on Magnetorheological Grease

Study on the dual-segment arctangent model of magnetorheological damper (MRD)

Design and Damping Performance Analysis of a Multistage Meandering Hybrid Valved Magnetorheological Damper

Design and experiment study of a novel dual-channel independent-coil magnetorheological grease damper

Performance analysis of the damper with built-in magnetorheological valve

Magnetorheological Damper Working in Squeeze Mode