Abstract:Continuous out‐of‐plane actuation >5 mm of objects is achieved using fluid‐driven membrane‐based actuation. Fluidic chip prototypes consisting of multi‐layered channels are fully 3D‐printed, with an elastomeric membrane attached to the surface which is interfaced with acoustic metamaterial reflectors. Controlled inflation and deflation of sections of the membrane enables the actuation of an acoustic metasurface, designed for acoustic focusing at five different locations. Acoustic metamaterials based on out‐of‐plane actuation can flexibly reconfigure arrayed unit cells on demand, to shape sound fields for applications such as beam formation or holography. However, implementing active reconfiguration on the millimeter‐scale is challenging, due to the lack of suitable actuation methods. Besides electronic complexity, current methods suffer from limited actuation range (sub‐millimeter), and discrete steps inhibit smooth sound modulation. Here, a novel fluid‐driven approach for continuous out‐of‐plane actuation is presented. A three dimensionally (3D)‐printed fluidic chip is integrated with an elastomeric membrane, and selective inflation of membrane sections actuates acoustic reflector unit cells according to their shape and position. The compact device enables displacements >5 mm without coupling mechanisms or external power. It is experimentally demonstrate single‐channel and multi‐channel prototypes, including an ultrasonic metasurface built for controllable acoustic focusing at five different locations. The fluidic chips are monolithically printed via digital light processing without internal support material, and the membranes are fabricated by accessible and cost‐effective spacer‐based fabrication. The methods are reproducible and eliminate complex processes (e.g., adhesion of layers) commonly associated with multi‐layered micro/milli fluidic devices. The outlined approaches and concepts in this work can be applied beyond the field of metamaterials, such as for visual displays, or tactile devices.

Fluid Driven Membrane Actuation for Reconfigurable Acoustic Manipulation

Fluid Driven Membrane Actuation for Reconfigurable Acoustic Manipulation (Adv. Funct. Mater. 49/2024)

Ultra-compact Reflective Metasurface for Wave Manipulation

A Reconfigurable Membrane-Type Acoustic Metasurface for Low-Frequency and Broadband Wave Front Modulation

Reconfigurable Manipulation of Sound with a Multi-material 3D-Printed Origami Metasurface

Programming Reflected and Transmitted Sound Behaviors Based on Motor‐Driven Digital Metasurface

Micro/nano Acoustofluidics: Materials, Phenomena, Design, Devices, and Applications.

Magnetically Controlled Multifunctional Membrane Acoustic Metasurface

Programmed Internal Reconfigurations in a 3D-Printed Auxetic Metamaterial Enable Fluidic Control for a Vertically Stacked Valve Array

Elastomeric focusing enables application of hydraulic principles to solid materials in order to create micromechanical actuators with giant displacements

Additive manufacturing of three-dimensional (3D) microfluidic-based microelectromechanical systems (MEMS) for acoustofluidic applications

A dynamically reprogrammable surface with self-evolving shape morphing

3D Printed Acoustically Programmable Soft Microactuators

Controlling the effective surface mass density of membrane-type acoustic metamaterials using dynamic actuators

A dynamically reprogrammable metasurface with self-evolving shape morphing

Programmed Internal Reconfigurations in a 3D-Printed Mechanical Metamaterial Enable Fluidic Control for a Vertically Stacked Valve Array

Acoustically Driven Manipulation of Microparticles and Cells on a Detachable Surface Micromachined Silicon Chip

Detachable artificial micro-structured silicon chip for reconfigurable acoustofluidic particle manipulation

A reconfigurable active acoustic metalens

Ultrabroadband and Multifunctional Achromatic Mikaelian Lens on an Elastic Plate

Active acoustic metamaterials reconfigurable in real-time