Interaction of Vertical Convection with an Electromagnetically Forced Flow

Evgeniy Shvydkiy,Ivan Smolyanov,Egbert Baake
DOI: https://doi.org/10.48550/arXiv.2203.08610
IF: 0.673
2022-03-14
Fluid Dynamics
Abstract:Heat and momentum transfer of low-Prandtl-number fluid ($Pr=0.029$) in a closed rectangular cavity ($100\times60\times10$ mm$^3$) heated at one side and cooled at the opposite side are analyzed. The electromagnetic forces into the liquid metal are generated by the travelling magnetic field inductor and directed towards buoyancy forces. Large eddy simulations are performed with the Grashof number $Gr$ from $1.9\cdot 10^5$ to $7.6\cdot 10^7$ and the electromagnetic forcing parameter $F$ from $2.6\cdot 10^4$ to $2.6\cdot10^6$. An experimental validation of the simulation results of vertical convection and electromagnetically driven flow using GaInSn alloy has been performed. Three types of flow patterns are obtained for different interaction parameters $ N = F / Gr $: counterclockwise flow, clockwise flow, and coexistence of two vortices. Analysis of the Reynolds number shows that the transition zone from natural convection to electromagnetic stirring lies in the range $0.02<F/Gr<0.07$ and two braking modes are found. The transition point between the convective heat transfer regimes is found for $ F / Gr $ around 1. The analysis of isotherms deformation showed that in such convective systems it is possible to achieve minimum deviation of the isotherm shape from a straight line in the range of $ 0.05 <F/Gr <0.2 $.
What problem does this paper attempt to address?