Abstract:An experimental study is conducted on localized bulging of inflated latex rubber tubes of a range of wall thicknesses and tube lengths, guided by newly emerged analytical results. In the case when the tube has one free closed end that may or may not be subjected to a dead weight, the initiation pressure for localized bulging is determined by a bifurcation condition, and the propagation pressure is determined by Maxwell's equal-area rule. It is shown that after bulge initiation the pressure will decrease monotonically towards, but will never reach, the propagation pressure, and it is when the pressure is sufficiently close to this propagation pressure that rapid propagation of the bulge in the axial direction takes place. It is found that the experimentally observed initiation pressure is around 15% below the theoretical prediction, which is consistent with the fact that bulging initiation is a sub-critical phenomenon and is therefore sensitive to imperfections. The experimentally observed propagation pressure is always very close to the theoretical prediction, which confirms the insensitivity of this pressure to imperfections and demonstrates the predictive power of the material model fitted from our own experiments on equibiaxial stretching. In the other case when the tube is first stretched and then fixed at both ends, bulge initiation takes place in the same manner as in the previous case, but the propagation pressure is no longer determined by Maxwell's equal-area rule. After bulge initiation the pressure will first decrease to a minimum and then rises slowly, and it is on the latter ascending path that the bulge starts to propagate rapidly in the axial direction. A semi-analytical method is proposed for the determination of the minimum pressure. Numerical simulations with the use of the software Abaqus are also conducted to verify the theoretical predictions. (C) 2018 Elsevier Ltd. All rights reserved.

Instabilities of an inflated and extended doubly fiber-reinforced cylindrical membrane under damage processes and different natural configurations of its constituents with application to abnormal artery dilation

On the inflation, bulging/necking bifurcation and post-bifurcation of a cylindrical membrane under limited extensibility of its constituents

Drape and Inflatable Mechanics of Membrane Inflatable Structure

On growth, buckling, and rupture of aneurysms

Inflation-induced aneurysm formation and evolution in graded cylindrical tubes of arbitrary thickness

Sensitivity analysis of an inflated and extended fiber-reinforced membrane with different natural configurations of its constituents

Peristaltic Elastic Instability in an Inflated Cylindrical Channel

Torsion Instability of Anisotropic Cylindrical Tissues with Growth

Analyzing deformations in fiber-reinforced soft membranes undergoing axisymmetric inflation: Continuum model and experimental validation

Characterisation and stability of localised bulging/necking in inflated membrane tubes

On deforming a sector of a circular cylindrical tube into an intact tube: existence, uniqueness, and stability

Finite Deformation Mechanics In Buckled Thin Films On Compliant Supports

An Experimental Study of Localized Bulging in Inflated Cylindrical Tubes Guided by Newly Emerged Analytical Results

Simulation of balloon angioplasty in residually stressed blood vessels-Application of a gradient-enhanced fibre damage model

Coupled torsion and inflation of functionally graded and residually stressed Mooney–Rivlin hollow cylinders

Energy-Based Strength Theory for Soft Elastic Membranes

Simulation of Damage Hysteresis in Soft Biological Tissues

A multiscale discrete fiber model of failure in heterogeneous tissues: Applications to remodeled cerebral aneurysms

Morphology of residually-stressed tubular tissues: Beyond the elastic multiplicative decomposition

Delayed Tensile Instabilities of Hydrogels

Coupled electro-elastic deformation and instabilities of a toroidal membrane