Abstract:The machining accuracy of the whole machine tool is significantly reduced by the thermal error of the feed drive system, which accounts for more than 50 % of the total error of the machine tool. Specifically, the heat generation, particularly within the feed drive system, emerges as a significant challenge, impacting the system's positioning accuracy and repetitive positioning accuracy. To reduce the thermal effect, cooling systems are commonly installed to suppress temperature rise and improve thermal accuracy currently. But the design of the cooling device with commonly-used spiral and serpentine cooling channels relies on empirical methods, often resulting in significant drawbacks such as substantial pressure losses and uneven temperature distribution. Moreover, the nut and slider in machine tool feed drive system act as moving heat sources, resulting in an uneven temperature field and thermal deformation in the axial direction of screw shaft. To confront the aforementioned complexities, the novel strategy of cooling moving heat sources such as nuts and sliders is proposed for the first time. Then a topology optimization model, which is more closely aligned with the specific practical applications, is proposed. Specifically, the control equations of the topology optimization model are rendered dimensionless and meticulously adjusted to account for the surface heat dissipation of the cooling devices, with a heat dissipation term incorporated into the control equations. Comparison of the topology optimization results at various iteration steps of the objective function is conducted to identify the most optimal proportional coefficient. Extensive numerical and experimental verifications are conducted, comparing traditional and topology-optimized flow channels in terms of temperature and pressure performances. The pressure loss in the topology-optimized channel is significantly lower compared to that of the S-shaped cooling channel, and the pressure loss is reduced by 28.6 %. The heat dissipation performance is significantly better than that of the L-shaped flow channel, and the average surface temperature is reduced by 27.7 %. The experiment results confirm the superiority of the topology-optimized cooling channels in efficiently controlling the temperature and maintaining pressure balance. By implementing the designed cooling plate and water jacket, the axial thermal expansion of the screw shaft is curtailed by approximately 10 %, leading to a reduction in the feed drive system's positioning error by over 77 %.

Analysis of influence of different convex structures on cooling effect of rectangular water channel of motorized spindle

Water Cooling System Design and Thermal Analysis for Electrical Vehicle Driving Motors

Conjugate Heat Transfer in Fractal Tree-Like Channels Network Heat Sink for High-Speed Motorized Spindle Cooling

Design and Thermal Characteristic Analysis of Motorized Spindle Cooling System

3D Thermal Analysis of a Permanent Magnet Motor with Cooling Fans

Thermal-structure Characteristics Coupling Analysis and Optimisation for Horizontal CNC Machining Centre Spindle

Design of machine tool cooling system and optimization of cooling parameters based on differential cooling control strategy

Study on thermal deformation and cooling suppression of five-axis direct drive swing head

Design and Optimization Analysis of Composite Water Cooling System Based On High Power Density Motor

Topology optimization in cooling moving heat sources for enhanced precision of machine tool feed drive systems

Thermal deformation and economic analysis of a multiobject cooling system for spindles with varied coolant volume control

Experimental study on thermal deformation suppression and cooling structure optimization of double pendulum angle milling head

Collaborative optimization on cooling channel flow resistance and winding temperature for integrated cooling of motor and controller

Analysis of Cooling Structure of Axial Flux Permanent-Magnet Synchronous Motor for Electric Aircrafts

Thermal performance analysis and experimental study of high-speed motorized spindle based on the gradient descent method

Numerical simulation and experimental study of the air-cooled motorized spindle

Heat Transfer Performance Improvement of Permanent Magnet Synchronous Linear Motor Based on Embedded Staggered Double Channel Water-cooling Structure

Optimizing coolant loop design across the stator core: A research study

Simulation on thermal characteristics of high-speed motorized spindle

Thermal Cooling Enhancements in a Heated Channel Using Flow-Induced Motion

Thermal performance analysis and prediction of a circumferential serpentine tube for high-power motor cooling