Abstract:The leakage rates of bolted flanged connections change with service time due to the gasket contact stress relaxation and degradation of gasket material. The nonuniform distribution of gasket contact stress has significant influence on the leakage behavior of the connections. In order to predict the time-correlated leakage rates accurately, both appropriate approaches to dealing with the gasket residual contact stress and a corresponding time-correlated leakage model of sealing elements are needed. In this paper, an analytical model has been developed to determine the maximum contact stress at gasket outer diameter in consideration of creeps of flanges, bolts and gasket coupled to the axial deformation compatibility equation. The analysis was verified against the finite element numerical simulation considering the nonlinear behavior of gasket and material creep. The analytical results of the maximum contact stress of gasket and its change over time compared well with those obtained by finite element method. A time-correlated leakage model of nonmetallic gasket sealing connections based on the porous medium theory was established, in which the effects of the gasket material degradation and contact stress relaxation on the sealing performance were taken into consideration. Furthermore, a leakage rate prediction method was proposed. Some long-term sealing performance tests were performed on two types of gaskets to obtain the coefficients in the leakage model. The leakage rate prediction method proposed in this paper was also validated against the experimental data presented by other researchers, and the errors between the predicted values and the experimental results were within 18%. [DOI: 10.1115/1.4004818]

Effect of gasket material on flange face corrosion

Effect of gap size on flange face corrosion

Study on Effect of Gasket Stress Distribution on Bolted Flanged Connections

Time-dependent leakage rate prediction method for bolted flange connection based on equivalent stress-temperature

Life Assessment of Non-metallic Gasket Bolted Flanged Connections

Practical Sealing for Common Gasket Materials and Construction Types

Behavior of bolted joints with metal-to-metal contact type gaskets under bolting-up and loading conditions

Simulation of Leakage Behavior on Bolted Flanged Connections in Elevated Temperature Service

Prediction of Time-Correlated Leakage Rates of Bolted Flanged Connections by Considering the Maximum Gasket Contact Stress

Corrosion resistance of GTA-welded super duplex and nitronic steel in marine environments

Influence of Corrosive Conditions on the Mechanical Performance of Flow Drill Screw Joints between Light Metals

Advances of Research on Bolted Flange Joints at Elevated Temperature

Metallurgical Analysis of Leakage Observed at EB Weld Joint Between SS321 Inner Cylinder and Flange of Air Heater-Mixing Zone Module

Influence of geometric imperfections of flange joints on the fatigue load of preloaded bolts

Numerical and Experimental Study of Elastic Interaction in Bolted Flange Joints

Analysis of Causes and Protective Measures against Corrosion Perforation in the Shell-Side Outlet Flange of a Sour Water Steam Heater

Friction and Wear Characteristics of Impregnated Graphite Materials under Corrosion Environments

Clamp Load Loss due to Elastic Interaction and Gasket Creep Relaxation in Bolted Joints

Analytical Method of Gasket Stress on Bolted Flanged Connections in Consideration of External Bending Moments and Elements Creep

Influence of Oxygen Content in the Protective Gas on Pitting Corrosion Resistance of a 316L Stainless Steel Weld Joint