Abstract:Bacterial adhesion to stainless steel surfaces is one of the major reason causing the cross-contamination and infection in many practical applications. An approach to solve this problem is to enhance the antibacterial properties on the surface of stainless steel. In this paper, novel antibacterial stainless steel surfaces with different copper content have been prepared by a plasma surface alloying technique at various gas pressures. The microstructure of the alloyed surfaces was investigated using glow discharge optical emission spectroscopy (GDOES) and scanning electron microscopy (SEM). The viability of bacteria attached to the antibacterial surfaces was tested using the spread plate method. The antibacterial mechanism of the alloyed surfaces was studied by X-ray photoelectron spectroscopy (XPS). The results indicate that gas pressure has a great influence on the surface elements concentration and the depth of the alloyed layer. The maximum copper concentration in the alloyed surface obtained at the gas pressure of 60 Pa is about 7.1 wt.%. This alloyed surface exhibited very strong antibacterial ability, and an effective reduction of 98% of Escherichia coli (E. coli) within 1 h was achieved by contact with the alloyed surface. The maximum thickness of the copper alloyed layer obtained at 45 Pa is about 6.5 μm. Although the rate of reduction for E. coli of this alloyed surface was slower than that of the alloyed surface with the copper content about 7.1 wt.% over the first 3 h, few were able to survive more than 12 h and the reduction reached over 99.9%. The XPS analysis results indicated that the copper ions were released when the copper alloyed stainless steel in contact with bacterial solution, which is an important factor for killing bacteria. Based on an overall consideration of bacterial killing rate and durability, the alloyed surface with the copper content of 2.5 wt.% and the thickness of about 6.5 μm obtained at the gas pressure of 45 Pa is expected to be useful as antimicrobial materials that may have a promising future in antimicrobial applications. © 2011 Elsevier B.V. All rights reserved.

Effect of electroless plating time and temperature on the formation and antibacterial ability of Cu-plated cement-based material

Anti-microbial corrosion performance of concrete treated by Cu2O electrodeposition: Influence of different treatment parameters

Improvement in the microbially induced corrosion resistance of concrete sewers using electrodeposition

Laboratory Investigation of the Microbiologically Influenced Corrosion (MIC) Resistance of a Novel Cu-bearing 2205 Duplex Stainless Steel in the Presence of an Aerobic Marinepseudomonas Aeruginosabiofilm

Influence of copper distribution in thermally sprayed Cu-bearing coatings on corrosion and microbial activity

Copper As an Antibacterial Agent for Human Pathogenic Multidrug Resistant Burkholderia Cepacia Complex Bacteria

An Investigation of the Antibacterial Ability and Cytotoxicity of A Novel Cu-Bearing 317l Stainless Steel

Effect of Cu addition to AISI 8630 steel on the resistance to microbial corrosion

Influence of cu distribution in thermally sprayed cu-bearing coatings on the prevention of Desulfovibrio vulgaris corrosion

Effects of Cu Content on the Corrosion Resistance and Antibacterial Property of Low Carbon Steels

Enhancing the Antibacterial Properties of Magnesium Alloys with Copper-Doped Anhydrous Calcium Phosphate Nanoparticles Embedded into the Polycaprolactone Coating for Medical Implants

Effect of copper content on the corrosion behaviors and antibacterial properties of binary Mg–Cu alloys

Surface microstructures and antimicrobial properties of copper plasma alloyed stainless steel

Application potential of alkali-activated concrete for antimicrobial induced corrosion: A review

In vitro degradation, photo-dynamic and thermal antibacterial activities of Cu-bearing chlorophyllin-induced Ca–P coating on magnesium alloy AZ31

Enhancing Antibacterial Performance: Structure, Phase Composition, and Microroughness of Selective Plated Copper Coatings on Medical-Grade Stainless Steel 1.4021 and Nickel Alloy Ni200

Effect of Electroless Plating Ni–Cu–P Layer on the Wettability Between Cemented Carbides and Soldering Tins

Antibacterial coatings on magnesium formed via plasma electrolytic oxidation in CuO suspension

Effect of copper addition on mechanical properties, corrosion resistance and antibacterial property of 316L stainless steel

Effects of Bacterial Culture and Calcium Source Addition on Lead and Copper Remediation Using Bioinspired Calcium Carbonate Precipitation

Construction of a Rough Surface with Submicron Ti2Cu Particle on Ti-Cu Alloy and Its Effect on the Antibacterial Properties and Cell Biocompatibility