Distribution uniformity improvement methods of a large discharge rate disc spreader for UAV fertilizer application
Wang Xunwei,Zhou Zhiyan,Chen Boqian,Zhong Jinfeng,Fan Xiaolong,Andrew Hewitt
DOI: https://doi.org/10.1016/j.compag.2024.108928
IF: 8.3
2024-04-19
Computers and Electronics in Agriculture
Abstract:Fertilizer applications from unmanned aerial vehicles (UAVs) have become increasingly common in crop farming. With the rise in UAV capacities for payload and batteries, and increases in application flight speeds, the demands on spreader performance, particularly discharge rate and uniformity, have grown. To address this, a design was developed which incorporates a horizontal screw auger, curved and straight vanes on the disc, and a cover with bumps. This was designed to enhance the distribution uniformity of a large discharge rate disc spreader for UAV fertilizer application. The discharge device featuring the horizontal screw auger achieved high, precise discharge rates within a compact structure. The fertilizer was sequentially scraped by the vanes, with the curved vanes delaying particle release as batches. Upon release, the fertilizer batches collided with the cover, causing some to rebound and form a non-hollow circular spreading distribution. This two-step process transformed the spreading distribution from arc-shaped to non-hollow circular, thereby enhancing the spreader's uniformity. Simulation using the discrete element method (DEM) investigated how innovative structures improve distribution uniformity. A static spreading numerical model, established through a DEM, explored the impact of four factors (deflection angle of curved vanes, thickness, number, and position of bumps) on spreading distribution. Simulation experiments, conducted using a Box-Behnken design (BBD), optimized bump parameters. The spreader, mounted on a DJI T60 UAV, underwent single-route flight tests, assessing the effects of screw auger rotation rate, disc rotation rate, and flight speed on distribution uniformity. Results indicated that disc rotation rate and flight speed had negligible effects on fertilizer distribution uniformity, while screw auger rotation rate had a significant effect. Recommendations were made to increase disc and flight speeds for low fertilization application rates, enabling the screw auger to work at a higher rotation rate and achieve better uniformity. Field tests demonstrated that a compound fertilizer achieved a discharge rate of 190.02 kg/min, with an 8 m operation width and low coefficient of variation (CV) of 14.04 % for urea application and 14.68 % for compound fertilizer application. The spreader exhibited good uniformity and robustness across various fertilizers and rates. This research successfully developed a high-performance spreader for large-load UAVs, with significant implications for UAV applications in agriculture.
agriculture, multidisciplinary,computer science, interdisciplinary applications