Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Virtual track train (VTT) is a new urban public transportation system that adopts rubber wheel and rail transit management mode. Its characteristics of all-wheel-driving all-axle-steering (AWDAAS) enable this multi-articulated vehicle to run along the target path (virtual track) with high precision. This paper proposes a new traction guidance cooperative control strategy aiming at path-tracking and hinge forces optimisation. Firstly, the vehicle dynamics model is established using the two-step method, which mainly includes the centre of gravity (CG) forces model between the wheel steering angles, torques and the generalised forces at every unit. Secondly, the vehicle multi-body dynamics model is built with the CG generalised forces as the control input and carries on the concrete modelling for the three-unit six-axle AWDAAS-VTT. This modelling method can satisfy the rapid expansion and reconstruction according to the different marshalling numbers and axles. Then the hinge forces are analysed and expressed quantitatively by vehicle state and control inputs. A traction guidance cooperative control strategy based on a hierarchical framework is proposed, which has mainly three parts: the cooperative distribution of path-tracking and longitudinal speed targets, the CG generalised forces calculation of every unit based on improved model predictive control (MPC) and Stanley algorithm, and the control allocation (CA) of wheel torque and angle. The control strategy is verified by Co-simulation. The results show that the proposed control strategy can achieve excellent tracking accuracy and effectively reduce hinge forces. In addition, the vehicle under cooperative control also has excellent curve passing stability and continuous curve adaptability. The control strategy has high robustness under different running speeds, curve radii and payloads. Even under the extreme condition of passing through the R20 m curve at 14 m/s, the maximum tracking error is less than 0.035 m.

Transfer path analysis of a railway vehicle based on global transfer direct transfer

An accurate and reliable operational transfer path analysis for transfer path contribution evaluation based on landweber iterative method

Research on traction guidance cooperative control of virtual track train based on path-tracking and articulation hinge forces optimisation

Technical Note: Three-dimensional analyses of dynamic responses of track-ground system subjected to a moving train load

A System Response Prediction Approach Based on Global Transmissibilities and Its Relation with Transfer Path Analysis Methods

DYNAMIC RESPONSE ANALYSIS OF TRACK SYSTEM AND UNDERGROUND RAILWAY TUNNEL IN SATURATED SOIL SUBJECTED TO A MOVING TRAIN LOAD

Operational transfer path analysis for the fixed shaft gear transmission system based on the simulation and experiment

Dynamic Analysis of Tram Vehicles Coupled With the Track System Based on Staggered Iterative Algorithm

Tikhonov Regularization-Based Operational Transfer Path Analysis

Effects of the Dynamic Wheel–rail Interaction on the Ground Vibration Generated by a Moving Train

Transfer Path Analysis and Contribution Evaluation Using SVD- and PCA-Based Operational Transfer Path Analysis

Damped SVD for Operational Transfer Path Analysis

Relative Transfer Path Analysis Method and Its Application in Auto Body NVH Analysis

A Vertical Coupling Dynamic Analysis Method and Engineering Application of Vehicle–track–substructure Based on Forced Vibration

The transfer path analysis method on the use of artificial excitation: Numerical and experimental studies

Dynamic optimization of tracked vehicle power train based on torsional vibration analysis

Virtual track irregularity establishment for load prediction of heterogeneous bogie frames for virtually coupled trainsets

Fault Tracing of Gear Systems: an In-Situ Measurement-Based Transfer Path Analysis Method

Development of High-Speed Railway Vehicle Derailment Simulation – Part I: A New Wheel/rail Contact Method Using the Vehicle/rail Coupled Model

An efficient modelling approach to obtain dynamic properties of equipment coupled to the bogie of vehicle

A trailer car dynamics model considering brake rigging of a high-speed train and its application