Interaction Behavior between Coarse and Fine Particles in the Reverse Flotation of Fluorapatite and Dolomite

Xiaofen Huang,Qin Zhang
DOI: https://doi.org/10.1021/acs.langmuir.3c02117
IF: 3.9
2023-08-30
Langmuir
Abstract:The precondition for efficient flotation of middle- to low-grade phosphate ore is the dissociation of apatite from gangue minerals through fine grinding. However, fine gangue minerals, such as dolomite, have a lower hardness and are thus easily overground and converted into slime during the grinding stage. The effect of -10 μm dolomite fines (Dol<sub>-10μm</sub>) on the flotation of -75 + 25 μm dolomite (Dol<sub>-75+25μm</sub>) and -75 + 25 μm fluorapatite (FAp<sub>-75+25μm</sub>) from a detailed mechanism was investigated by microflotation tests, cryo-electron microscopy analysis, contact angle measurements, bubble-particle attachment test, and EDLVO theory. It was found that Dol<sub>-10μm</sub> significantly reduced the recovery of Dol<sub>-75+25μm</sub> and FAp<sub>-75+25μm</sub>. The Dol<sub>-10μm</sub> particles could decrease the flotation recovery of Dol<sub>-75+25μm</sub> particles by masking on their surfaces, thus reducing the hydrophobicity of mineral surfaces and preventing them from floating. Furthermore, Dol<sub>-10μm</sub> particles were easily adsorbed on the FAp<sub>-75+25μm</sub> surface and could not be effectively floated, which results in fine dolomite being mixed into the concentrate at the bottom of the tank, thereby reducing the selectivity of reverse flotation for phosphate ore. The interaction energy calculation showed that the presence of NaOL led to an attractive interaction force between Dol<sub>-10μm</sub> and Dol<sub>-75+25μm</sub>, as well as between Dol<sub>-10μm</sub> and FAp<sub>-75+25μm</sub>. As a result, Dol<sub>-10μm</sub> particles presented a nonselective aggregation with Dol<sub>-75+25μm</sub> and FAp<sub>-75+25μm</sub> particles, explaining the phenomenon of "slime coating" and the depressing effect of dolomite fines on phosphate reverse flotation.
chemistry, multidisciplinary, physical,materials science
What problem does this paper attempt to address?