A predicted new catalyst to replace noble metal Pd for CO oxidative coupling to DMO

Juan Zhao,Li-Fei Yin,Li-Xia Ling,Ri-Guang Zhang,Mao-Hong Fan,Bao-Jun Wang

DOI: https://doi.org/10.1039/d1cy01631h

2022-01-01

Abstract:The reaction mechanisms of CO oxidative coupling to dimethyl oxalate (DMO) on different β-Mo 2 C(001) based catalysts have been studied by the density functional theory (DFT) method.

chemistry, physical

What problem does this paper attempt to address?

Theoretically predicted innovative palladium stripe doping cobalt(111) surface with excellent catalytic performance for carbon monoxide oxidative coupling to dimethyl oxalate

Bingying Han,Neng Shi,Mengjie Dong,Ye Liu,Runping Ye,Lixia Ling,Riguang Zhang,Baojun Wang

DOI: https://doi.org/10.1016/j.cjche.2024.03.032

IF: 3.8

2024-05-28

Chinese Journal of Chemical Engineering

Abstract:Pd-based catalysts are extensively employed to catalyze CO oxidative coupling to generate DMO, while the expensive price and high usage of Pd hinder its massive application in industrial production. Designing Pd-based catalysts with high efficient and low Pd usage as well as expounding the catalytic mechanisms are significant for the reaction. In this study, we theoretically predict that Pd stripe doping Co(111) surface exhibits excellent performance than pure Pd(111), Pd monolayer supporting on Co(111) and Pd single atom doping Co(111) surface, and clearly expound the catalytic mechanisms through the density functional theory (DFT) calculation and micro-reaction kinetic model analysis. It is obtained that the favorable reaction pathway is COOCH 3 –COOCH 3 coupling pathway over these four catalysts, while the rate-controlling step is COOCH 3 +CO+OCH 3 →2COOCH 3 on Pd stripe doping Co(111) surface, which is different from the case (2COOCH 3 →DMO) on pure Pd(111), Pd monolayer supporting on Co(111) and Pd single atom doping Co(111) surface. This study can contribute a certain reference value for developing Pd-based catalysts with high efficient and low Pd usage for CO oxidative coupling to DMO. Graphical abstract Download : Download high-res image (267KB) Download : Download full-size image

engineering, chemical
Efficient CO Oxidative Coupling to Dimethyl Oxalate over the Pd/Al2O3 Nanocatalyst with the Assistance of Co Doping

Bing Li,Jiaming Zhu,Ziqing Huang,Bingjiang Jia,Bolin Guo,Jingyi Liu,Qing Zhang

DOI: https://doi.org/10.1002/slct.202305131

2024-05-08

ChemistrySelect

Abstract:An efficient Pd nanocatalyst with Co doping was synthesized by impregnation method with in situ reduction, and exhibited an excellent catalytic activity for CO oxidative coupling to dimethyl oxalate. Co doping facilitated distinctly CO conversion and the formation of dimethyl oxalate arising from the positive interaction between Co and the catalyst. CO oxidative coupling to dimethyl oxalate (DMO) is an important approach for the product of ethylene glycol and CO elimination. In this work, the Co doped Pd/Al2O3 nanocatalyst was highly effective for CO oxidative coupling and enhanced remarkably CO conversion and the formation of DMO. The maximum DMO STY reached 1082 g L−1 h−1 over the Pd/Al2O3@1/20Co catalyst at 130 °C for 2 h under the space velocity of 3000 h−1, which is two times higher than that over the Pd/Al2O3 catalyst. The Co modification and its influence on the structure of the Pd/Al2O3 catalyst were also studied systematically by XRD, TEM, CO‐TPD, N2 physical adsorption and XPS techniques. An appropriate Co doing was confirmed to promote distinctly the generation of smaller Pd particles and the adjustment of the adsorption or activation of CO over the catalyst. A positive interaction between Pd nanoparticles and the modulated support with Co doping was demonstrated and favored the enhanced activity of the catalyst for the reaction.

chemistry, multidisciplinary
The regulating effect of doping Cu on the catalytic performance of CO oxidative coupling to DMO on PdxCuy/GDY: A DFT study

Juan Zhao,Min Han,Zhanhui Wang,Lixia Ling,Riguang Zhang,Baojun Wang

DOI: https://doi.org/10.1016/j.gee.2020.11.011

2020-11-01

Abstract:Rely on the density functional theory (DFT) calculation, the catalytic performance of PdxCuy/GDY (x = 1, 2, 3, 4; x+y ≤ 4) for CO oxidative coupling reaction was obtained. The Pdx/GDY (x = 1, 2, 3, 4) are not ideal catalyst for dimethyl oxalate (DMO) formation because by-product dimethyl carbonate (DMC) is easily formed on Pd1/GDY and Pd2/GDY, and high activation energies are needed on Pd3/GDY and Pd4/GDY. Therefore the second metal Cu is doped to regulate the performance of Pdx/GDY (x = 1, 2, 3, 4). Doping Cu not only improve the activity of DMO formation, but more importantly, controlling the ratio of Cu:Pd can effectively regulate the selectivity of DMO. Thus taking into account the activity and selectivity of the reaction for the preparation of DMO by CO oxidative coupling, the Pd1Cu1/GDY and Pd1Cu2/GDY with the activation energies of 105.2 and 99.2 kJ/mol to generate DMO show excellent catalytic activity and high DMO selectivity, which are considered as good catalysts for CO oxidative coupling. The differential charge density analysis shows the decrease in the charge density of metal clusters is an important reason for improving the selectivity of the catalyst.

energy & fuels,engineering, chemical,green & sustainable science & technology,chemistry, physical
CO oxidative coupling to dimethyl oxalate over Pd monolayer supported on SiC substrate: insight into the effects of different exposed terminals

Bingying Han,Mengjie Dong,Riguang Zhang,Lixia Ling,Maohong Fan,Ping Liu,Baojun Wang

DOI: https://doi.org/10.1016/j.mcat.2021.111926

IF: 4.6

2021-10-01

Molecular Catalysis

Abstract:Developing supported Pd-based catalysts with the low Pd amount and excellent catalytic performance is essential for CO oxidative coupling to dimethyl oxalate (DMO), where elucidating the effects of different exposed terminals of substrate materials on catalytic performance is crucial to the design of supported catalysts. Herein, Pd monolayer was supported on SiC with different exposed terminals, constructing the models of PdML/SiC(111)-Si and PdML/SiC(111)-C terminal, which was used to investigate the effects of different exposed terminals of substrate materials on DMO synthesis from CO and OCH3. The density functional theory (DFT) calculations illustrated there existed no difference in the optimum path to generate DMO, which was COOCH3-COOCH3 coupling path on two catalysts. However, the rate control steps of the optimum path were different, with 2COOCH3 → DMO on the PdML/SiC(111)-Si terminal and COOCH3 + (CO + OCH3) → 2COOCH3 on the PdML/SiC(111)-C terminal. The micro-reaction kinetic model analysis further showed that the catalytic performance of PdML/SiC(111)-Si terminal was favorable than that of PdML/SiC(111)-C terminal, mainly attributing to that the difference in the exposed terminals of substrate materials led to the different electrons transfer directions of the Pd monolayer, then changed the adsorption energy of reactants (CO, OCH3) and key intermediates (COOCH3, OCCOOCH3), and further changed rate control step of the optimum path. This work offers the insights in rational design of supported Pd-based catalyst for heterogeneous catalytic reaction.

chemistry, physical
CO Oxidation over MOx (M = Mn, Fe, Co, Ni, Cu) Supported on SmMn2O5 Composite Catalysts

Yun Lang,Jie Zhang,Zijian Feng,Xiao Liu,Yuning Zhu,Tao Zeng,Yunkun Zhao,Rong Chen,Bin Shan

DOI: https://doi.org/10.1039/c8cy01263f

IF: 6.177

2018-01-01

Catalysis Science & Technology

Abstract:The ability to oxidize CO at relatively low temperature is barely satisfactory for pure SmMn2O5 (SMO) catalysts. While loading precious metals like platinum nanoclusters on mullite SMO is an effective approach to enhance its catalytic performance, the high cost of noble metals has limited its large scale application. In this work, we systematically study an alternative approach to composite catalyst formation by loading non-precious metal oxides MOx (M = Mn, Fe, Co, Ni, Cu) onto SMO mullite for CO oxidation. Inductively coupled plasma-optical emission spectroscopy (ICP-OES) and high-resolution transmission electron microscopy (HRTEM) analyses show that composite catalysts are successfully formed by loading MOx nanoparticles at a content of approximate to 0.75 wt% through the deposition precipitation (DP) method. Except for FeOx, MOx loaded samples in general exhibit much higher reaction rates of CO oxidation than bare SMO especially at the temperature range below 100 degrees C. The promoted activity for MOx/SMO composites can be attributed to the improved reducibility of adsorbed oxygen (O-ads) and the increased oxidation state of Mn cations at the interface. Such behavior accelerates the decomposition of carbonates, as indicated by the H-2 temperature-programmed reduction (TPR), X-ray photoelectron spectroscopy (XPS) and diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy results. We demonstrate that the best catalytic performance of the CuOx/SMO composite also stems from the additional CO adsorption on the CuOx sites. The work presented herein provides a method to enhance the CO oxidation performance of SMO and helps in understanding the oxidation reaction mechanism involving mullites with loaded transition metal oxides (TMOs).
Cobalt Single Atoms on Tetrapyridomacrocyclic Support for Efficient Peroxymonosulfate Activation.

Chiheng Chu,Ji Yang,Xuechen Zhou,Dahong Huang,Haifeng Qi,Seunghyun Weon,Jianfeng Li,Menachem Elimelech,Aiqin Wang,Jae-Hong Kim

DOI: https://doi.org/10.1021/acs.est.0c06086

IF: 11.4

2020-01-01

Environmental Science & Technology

Abstract:Transition-metal catalysts that can efficiently activate peroxide bonds have been extensively pursued for various applications including environmental remediation, chemical synthesis, and sensing. Here, we present pyridine-coordinated Co single atoms embedded in a polyaromatic macrostructure as a highly efficient peroxide-activation catalyst. The efficient catalytic production of reactive radicals through peroxymonosulfate activation was demonstrated by the rapid removal of model aqueous pollutants of environmental and public health concerns such as bisphenol A, without pH limitation and Co2+ leaching. The turnover frequency of the newly synthesized Co single-atom catalyst bound to tetrapyridomacrocyclic ligands was found to be 2 to 4 orders of magnitude greater than that of benchmark homogeneous (Co2+) and nanoparticulate (Co3O4) catalysts. Experimental results and density functional theory simulation suggest that the abundant π-conjugation in the polyaromatic support and strong metal-support electronic interaction allow the catalysts to effectively adsorb and activate the peroxide precursor. We further loaded the catalysts onto a widely used poly(vinylidene fluoride) microfiltration membrane and demonstrated that the model pollutants were oxidatively removed as they simply passed through the filter, suggesting the promise of utilizing this novel catalyst for realistic applications.
Paired-Pd(II) centers embedded in HKUST-1 framework: Tuning the selectivity from dimethyl carbonate to dimethyl oxalate

Hong-Zi Tan,Zhe-Ning Chen,Kai-Qiang Jing,Jing Sun,Yu-Ping Xu,Ning-Ning Zhang,Zhong-Ning Xu,Guo-Cong Guo

DOI: https://doi.org/10.1016/j.jechem.2021.09.033

IF: 13.1

2022-04-01

Journal of Energy Chemistry

Abstract:CO oxidative coupling to dimethyl oxalate (DMO) is the most crucial step in coal to ethylene glycol. Pd-based supported catalysts have been verified effective for generating DMO, but concomitant generation of dimethyl carbonate (DMC) is always unavoidable. It is generally accepted that Pd(0) is the active species for producing DMO, while Pd(II) for DMC. However, density functional theory calculations have proposed that the selectivity to DMO or DMC highly depends on the space state of Pd species rather than its oxidative state. It is thus urgently desired to develop high-efficient catalysts with well-defined structure, and further to elucidate the structure-performance relationship. In this work, HKUST-1 with unique structure of paired-Cu(II) centers was chosen as ideal support to construct the catalysts with respective paired-Pd(II) centers and isolated-Pd(II) centers via in situ Pd species doping. In despite of featuring Pd δ + (δ≈2) oxidation state, the synthesized paired-Pd(II)/HKUST-1 catalyst still exhibited DMO as dominant product (90.8% of DMO selectivity). For isolated-Pd(II)/HKUST-1 catalyst, however, the main product was DMC (84.8% of DMC selectivity). Based on catalyst characterizations, the structures of paired-Pd(II) centers and isolated-Pd(II) centers were determined. DMO was generated from the coupling of adjacent *COOCH3 intermediates adsorbed on paired-Pd(II) centers, while DMC was produced from the reaction between methyl nitrite and the *COOCH3 intermediates formed on isolated-Pd(II) centers. Current work is the first MOFs-based catalyst with well-defined structure being applied in CO oxidative coupling reaction, which not only sheds light on the structure-performance relationship, but also inspires the potential of using MOFs as tunable platform to design high-efficient catalysts in heterogeneous catalysis.

chemistry, physical,engineering, chemical, applied,energy & fuels
Mechanochemical synthesis of a high-surface-area Pd/α-Al2O3 catalyst for CO oxidative coupling to dimethyl oxalate reaction

Lin Yang,Zhendong Pan,Donge Wang,Shuaiqi Wang,Xiaoping Wang,Huaijun Ma,Wei Qu,Zhijian Tian

DOI: https://doi.org/10.1039/d2cy01895k

2023-01-01

Abstract:High-surface-area α-Al2O3 with abundant hydroxyls is synthesized by a ball-milling method. It demonstrates high catalytic activity and excellent stability for the CO oxidative coupling to dimethyl oxalate reaction.
Highly Effective Pd/MgO/γ-Al 2 O 3 Catalysts for CO Oxidative Coupling to Dimethyl Oxalate: The Effect of MgO Coating on γ-Al 2 O 3

Lin Yang,Zhendong Pan,Donge Wang,Shuaiqi Wang,Xiaoping Wang,Huaijun Ma,Hao Liu,Congxin Wang,Wei Qu,Zhijian Tian

DOI: https://doi.org/10.1021/acsami.1c04051

2021-06-09

Abstract:The support of MgO/γ-Al2O3 was initially prepared by a multiple impregnation method and Pd was placed on the surface of the MgO/γ-Al2O3 support via incipient wetness impregnation. Pd/MgO/γ-Al2O3 (Pd/MAO) catalysts were systematically characterized by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), CO2-temperature-programmed desorption (TPD), transmission electron microscopy (TEM), CO-Fourier transform infrared (CO-FTIR), and X-ray photoelectron spectroscopy (XPS) and tested in the CO oxidative coupling to dimethyl oxalate (DMO) reaction. Compared to Pd/γ-Al2O3, the catalytic activities of the Pd/MAO catalysts improved significantly. The Pd/MAO catalyst with a 30% mass ratio of Mg to γ-Al2O3 delivers 3 times higher STY of DMO than that of Pd/γ-Al2O3. It has been demonstrated that MgO covered γ-Al2O3 layer-by-layer forming MAO supports, which can increase surface basicity and the interaction between Pd particles and the MAO supports. Moreover, the relationship between metal and support interaction and catalytic performance was discussed.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c04051?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c04051</a>.Basicity extent of Pd/AO and Pd/MAO, the concentration of Pd and Mg of all catalysts, XRD patterns of physical mixtures of MgO and Al2O3, and NH3-TPD curves of Pd/AO and Pd/MAO catalysts (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04051/suppl_file/am1c04051_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Cobalt-Molybdenum Oxides for Effective Coupling of Ethane Activation and Carbon Dioxide Reduction Catalysis

Rui Yao,Jayson Pinals,Roham Dorakhan,Minhua Zhang,Prashant Deshlahra,Ya-Huei Cathy Chin,José E. Herrera

DOI: https://doi.org/10.1021/acscatal.2c02525

IF: 12.9

2022-09-26

ACS Catalysis

Abstract:This study reports the discovery of CoMoO x moieties with synergistic catalytic roles in C2H6–CO2 catalysis. C2H6–CO2 catalysis occurs through multiple, concomitant catalytic cycles, initiated by the dual cycles of C2H6 activation and CO2 activation, together with an undesired coke deposition cycle. C2H6 activation requires reactive oxygen species that assist with the kinetically relevant C–H bond activation; these oxygen species are generated from the CO2 activation cycle within the reverse water-gas shift (RWGS) reaction. An efficient CO2 activation in the RWGS reaction would retain higher O contents in CoMoO x moieties, leading to more effective kinetically relevant C–H bond activation of C2H6 and oxidation of coke precursors and thus increasing turnovers while mitigating deactivation. This mechanistic insight led us to design CoMoO x moieties, where the Co cation acts as a Lewis acid. Together with a vicinal oxygen vacancy, the Co cation activates CO2 via a Vacancy route through the formation of a kinetically relevant [Co···C(O)  O··· □vacancy···Mo]‡ transition state, at which the Co interacts with the C and the oxygen vacancy (□vacancy) abstracts the leaving O of CO2. The kinetically coupled cycles lead the ethane conversion rates in dehydrogenation and reforming reactions to both depend directly on the RWGS reaction rates. This mechanistic understanding of rate coupling has led to the design of CoMoO x moieties with dual functionality for effective C2H6–CO2 catalysis.

chemistry, physical
Atomically Dispersed CrOX on Pd Metallene for CO-Resistant Methanol Oxidation

Yu Qiu,Jinchang Fan,Jiandong Wu,Wenting Lu,Shengwei Wang,Dewen Wang,Xin Ge,Xiao Zhao,Wei Zhang,Weitao Zheng,Xiaoqiang Cui

DOI: https://doi.org/10.1021/acs.nanolett.3c03141

2023-10-25

Abstract:The effective design and construction of high-performance methanol oxidation reaction (MOR) electrocatalysts are significant for the development of direct methanol fuel cells. But the active sites of the MOR electrocatalysts are susceptible to being poisoned by CO, resulting in poor durability. Herein, we report an atomically dispersed CrOX species anchored on Pd metallene through bridging O atoms. This catalyst shows an outstanding MOR performance with 7 times higher mass activity and 100 mV lower CO electrooxidation potential than commercial Pd/C. The results of operando electrochemical Fourier transform infrared spectroscopy demonstrate the rapid removal of CO* on CrOX-Pd metallene. Theoretical calculations reveal that atomically dispersed CrOX can lower the adsorption energy of CO* on Pd sites and enhance that of OH* through the formation of a hydrogen bond, decreasing the formation energy of COOH*. This work provides a new strategy for improving MOR performance via atomically engineering oxide/metal interfaces.
The synergistic effect in the heteronuclear double-atom catalysts on CO activation: Insights from DFT calculations

Guorong Jia,Lixia Ling,Riguang Zhang,Baojun Wang

DOI: https://doi.org/10.1016/j.mcat.2024.114005

IF: 4.6

2024-03-08

Molecular Catalysis

Abstract:In order to identify the synergistic effect in the heteronuclear double-atom catalysts (DACs) on CO activation, the homonuclear and heteronuclear DACs have been designed based on graphene supporter. And the three CO dissociation pathways have been considered using the density functional theory (DFT) calculation. It reveals that the heteronuclear DACs (MoX@NC) possesses higher catalytic ability than the homonuclear DACs (2X@NC) for CO activation. And the unpaired d -orbital electron plays a significant role on CO activation, which can change the magnetic moment of the DACs. The coordination atoms offer similar local coordination environment for the homonuclear and heteronuclear DACs. However, the Bader charge displays that there is a strong electronic interaction between Mo atom and other transition metals of dimer for the heteronuclear DACs. The synergistic effect of the heteronuclear DACs originates from the enhancement of the intermetallic interaction between the Mo atom and other transition metals. The work offers rational guideline for the synthesis of DACs with excellent catalytic performances, and has great potential for application in various catalytic fields.

chemistry, physical
Design of Cu/MoOx for CO2 Reduction via Reverse Water Gas Shift Reaction

Yuan Gao,Kun Xiong,Bingfeng Zhu

DOI: https://doi.org/10.3390/catal13040684

IF: 3.9

2023-04-01

Catalysts

Abstract:CO2 reduction to CO as raw material for conversion to chemicals and gasoline fuels via the reverse water–gas shift (RWGS) reaction is generally acknowledged to be a promising strategy that makes the CO2 utilization process more economical and efficient. Cu-based catalysts are low-cost and have high catalytic performance but have insufficient stability due to hardening at high temperatures. In this work, a series of Cu-based catalysts supported by MoOx were synthesized for noble metal-free RWGS reactions, and the effects of MoOx support on catalyst performance were investigated. The results show that the introduction of MoOx can effectively improve the catalytic performance of RWGS reactions. The obtained Cu/MoOx (1:1) catalyst displays excellent activity with 35.85% CO2 conversion and 99% selectivity for CO at 400 °C. A combination of XRD, XPS, and HRTEM characterization results demonstrate that MoOx support enhances the metal-oxide interactions with Cu through electronic modification and geometric coverage, thus obtaining highly dispersed copper and more Cu-MoOx interfaces as well as more corresponding oxygen vacancies.

chemistry, physical
Pd–Mo bimetallic catalysts for electrochemical reduction of carbon dioxide to carbon monoxide

Devina Thasia Wijaya,Chan Woo Lee

DOI: https://doi.org/10.1016/j.jelechem.2023.118007

IF: 4.598

2024-01-06

Journal of Electroanalytical Chemistry

Abstract:Electrochemical CO 2 reduction is considered a promising solution to mitigate the increasing CO 2 emissions in the atmosphere. Despite the promising potential of this process, highly active catalysts are needed to enable its efficient operation. Mixed metal oxide (MMO) materials can promote the formation of a dynamic interface between a metal and its oxidized form under applied potential, resulting in a unique interaction with the reaction intermediates. We synthesized a Pd–Mo MMO with controlled size and composition and examined the effect of these properties on CO 2 electroreduction. Electron microscopy images confirmed the homogeneous distribution of the synthesized Pd 7 Mo 1 on a ZIF-8-derived porous carbon support, with sizes of ∼1.3 and 4.5 nm for the samples annealed at 200 and 400 °C, respectively. As shown by density functional theory calculations and X-ray photoelectron spectroscopy, adding 12.5 % Mo altered the electronic structure of Pd, enhancing CO desorption, and reducing the potential needed for CO production by up to ∼0.2 V, corresponding to a ∼40 % higher partial CO current density compared to pure Pd. This work demonstrates a facile MMO synthesis enabling particle size and composition control, which will facilitate the development of highly active MMO-derived nanoalloy materials for CO 2 electroreduction.

chemistry, analytical,electrochemistry
Heterogeneous Co1/P1Mo12O40 single-atom catalyst for CO oxidation via termolecular Eley-Rideal (TER) mechanism

Sajjad Hussain,Shamraiz Hussain Talib,Shafqat Rasool Shahzad,Shabbir Muhammad,Sharmarke Mohamed,Ahsanulhaq Qurashi,Haiyan Wang,Zhansheng Lu

DOI: https://doi.org/10.1016/j.mcat.2023.113539

IF: 4.6

2023-11-01

Molecular Catalysis

Abstract:Catalytic mechanisms, micro-kinetic and thermodynamics studies of Phosphomolybdic acid (PMA) supported non-noble metal (NNM1 = Sc1, Ti1, V1, Cr1, Mn1, Fe1, Co1, Ni1, Cu1, and Zn1) single-atom catalysts (SACs) are explored for carbon monoxide (CO) oxidation by using DFT calculations. The results reveal that Co1/P1Mo12O40 have demonstrated excellent ability to adsorb (CO, O2) molecules, resulting in significant charge transfer from the catalyst surface to the adsorbate, which is essential to produce CO2 under normal reaction conditions. The various reaction pathways, including Eley Rideal (ER), Langmuir Hinshelwood (LH), Termolecular Eley Rideal (TER), and Mars Van Krevelen (MvK) are explored for CO oxidation on Co1/P1Mo12O40 to authenticate the most auspicious reaction mechanism. The energy barrier for the TER mechanism was 0.41 eV, lower as compared to the other reported materials which suggests that the Co1/P1Mo12O40 SACs would be the most appropriate future material for CO oxidation. To further validate the results, we performed the microkinetic investigation which predicts the CO oxidation rate of 4.58 × 106 s − 1. The key role of spin-magnetic moment for the promotion of CO oxidation by using Co1 single-atom catalyst was revealed from the deep electronic analysis. The current results would provide appreciated guidelines for experimentalists to develop less expensive and more effective non-noble metal SACs for CO oxidation.

chemistry, physical
Modulating the Electronic Structure of PdCoP Nanonetworks Alloy for Efficient Electro-Catalysis of Methanol Oxidation

Dujuan Huang,Xiaoqu Wang,Ying Zhao,Ruiqi Zhang,Rajkumar Devasenathipathy,Jiahui Wu,Qiulan Huang,Limin Wang,Du-Hong Chen,Youjun Fan,Wei Chen

DOI: https://doi.org/10.1016/j.mcat.2024.114512

IF: 4.6

2024-01-01

Molecular Catalysis

Abstract:Modulating the d-orbital electronic structure of active metals by doping heteroatoms is efficient for the electro-catalysis of methanol oxidation reaction (MOR). However, precise doping hybrid atoms into the lattices of alloy catalysts remains challenging. Herein, the selected doping of electron-rich P atoms at the active site of Pd was achieved by hydrothermal reduction. We found that P atoms prefer to bond Pd atoms, thus tuning the electronic structure of active sites in PdCoP alloy. Consequently, the tailored PdCoP catalyst exhibited remarkable mass activity of 2.13 A mg(Pd)(-1) towards MOR, which surpasses most reported Pd-based alloy nanocatalysts. Theoretical calculations revealed that the tailored d-band center of Pd in PdCoP catalyst exhibited moderate adsorption of CO and OH intermediates, thus maximizing the MOR performance. The current work highlights the fabrication of P-doped Pd-based catalysts for realizing high MOR, which can be further extended to other energy-related applications.
Tuning the selectivity of Pd-based catalysts for CO oxidative esterification: Regulating Pd's electronic effect

Yuanyuan Huang,Qiuyue Mao,Pengbin Pan,Qiao-Hong Li,Yuan-Gen Yao

DOI: https://doi.org/10.1016/j.mcat.2024.114668

IF: 4.6

2024-11-10

Molecular Catalysis

Abstract:CO oxidative esterification is crucial in converting inorganic CO into organic oxygenated compounds within C1 chemistry and technology. However, understanding the structure-activity relationship underlying this reaction remains limited, primarily due to the entanglement of the Pd's geometric and electronic structures, which complicates selectivity control in practical applications. In this work, we design four Pd-based catalysts using the Al(111) motif to investigate their catalytic performance in CO oxidative esterification through density functional theory (DFT) calculations. Firstly, the larger lattice parameter of Al weakens horizontal Pd–Pd interactions while enhancing the vertical stability of Pd. Secondly, the electronic structure of Pd is locally regulated via charge transfer between subsurface and surface Pd, driven by their differences in work function. Our results indicate that the relative activity between CC coupling for dimethyl oxalate (DMO) and CO coupling for dimethyl carbonate (DMC) is primarily influenced by Pd's electronic effects, as revealed by energy barrier decomposition analysis. Thus, focusing on the regulation of Pd's electronic effects may offer a new strategy for controlling the selective oxidation esterification of CO.

chemistry, physical
Theoretical Investigations of Non-Noble Metal Single-Atom Catalysis: Ni1/FeOx for CO Oxidation

Jin-Xia Liang,Xiao-Feng Yang,Aiqin Wang,Tao Zhang,Jun Li

DOI: https://doi.org/10.1039/c6cy00672h

IF: 6.177

2016-01-01

Catalysis Science & Technology

Abstract:Significant progress has recently been made in single-atom catalysis involving noble metals. We report here a theoretical investigation of the catalytic mechanism of CO oxidation of a non-noble metal single-atom catalyst (SAC) Ni-1/FeOx using density functional theory (DFT). The calculated results show that this new SAC Ni-1/FeOx has a high catalytic activity at room temperature for CO oxidation. CO adsorption strength is a key factor in determining catalytic activity for CO oxidation. Compared with noble-metal catalysts Pt-1/FeOx and Ir-1/FeOx, the catalytic activity for CO oxidation of Ni-1/FeOx is found to be comparable to that of Pt-1/FeOx, but is considerably higher than that of Ir-1/FeOx. Our theoretical prediction of this new non-noble meta lNi(1)/FeOx catalyst with high catalytic activity for CO oxidation at room temperature may find practical applications. The theoretical investigation provides a fundamental understanding of the catalytic mechanism of singly-dispersed surface atoms and helps to stimulate further experimental studies on highly active non-noble metal single-atom catalysts.
Theoretical study on electroreduction of CO 2 to multi-carbon compounds catalyzed by Mo-based two-dimensional carbon-rich conjugated frameworks in tandem

Jinping Du,Ling Guo,Xuan Niu,Huan Xing

DOI: https://doi.org/10.1016/j.mtcomm.2024.108106

IF: 3.8

2024-01-26

Materials Today Communications

Abstract:Electrocatalytic reduction of CO 2 to multi-carbon compounds, such as n-propanol, α-olefins, and Dimethyl carbonate (DMC), has been widely considered an effective strategy to address excessive CO 2 emissions. However, enhancing reaction activity and selectivity is still challenging. In this work, a tandem catalyst built on Mo-based two-dimensional carbon-rich conjugated frameworks (2D CCFs) that has unique catalytic sites is introduced, which can efficiently convert and stabilize both C 1 and C 2 intermediates simultaneously. And, the reaction mechanisms and complex intermediates involved in the reduction of CO 2 to n-propanol, α-olefins, and DMC on Mo-based 2D CCFs have been thoroughly investigated. Based on density functional theory (DFT) calculations, Mo-Cr-Pc-Ni-O-CCFs, Mo-Cr-Pc-Mo-S-CCFs, and Mo-Mn-Pc-Co-TPP-CCFs in various catalysts are screened out because of their better CO 2 adsorption capacity and outstanding catalytic activity in the CO 2 reduction process (CO 2 RR). In addition, they can efficiently inhibit hydrogen evolution reaction (HER) while simultaneously promoting multiple C-C coupling, which enhances the electrosynthesis of n-propanol, α-olefins, and DMC. Comparing the d-band values and CO 2 adsorption capacities of Fe-based and Mo-based catalysts also reveals that Mo-based catalysts have higher catalytic activity and selectivity, which can be attributed to orbital hybridization and an electron donation-feedback mechanism. It effectively activates CO 2 molecules and causes them to be stably adsorbed on the catalyst. This research offers a theoretical foundation for the production of multi-carbon compounds as well as a reasonable guidance for the design of innovative Mo-based catalysts.

materials science, multidisciplinary
Emerging co-synthesis of dimethyl oxalate and dimethyl carbonate using Pd/silicalite-1 catalyst with synergistic interactions of Pd and silanols

Chunzheng Wang,Ningkun Xu,Ke Huang,Bin Liu,Peihua Zhang,Ge Yang,Hailing Guo,Peng Bai,Svetlana Mintova

DOI: https://doi.org/10.1016/j.cej.2023.143136

IF: 15.1

2023-04-28

Chemical Engineering Journal

Abstract:An emerging synthetic route for the co-synthesis of dimethyl oxalate (DMO) and dimethyl carbonate (DMC) via the indirect oxidative carbonylation of CH 3 OH is presented. The promising co-synthesis process combines the advantages of two separate routes of DMO and DMC syntheses. Herein, palladium containing silicalite-1 zeolite (Pd/S-1) catalyst was first found to be highly active and stable for the co-synthesis of DMO and DMC. The catalytic performance strongly depended on the catalyst activation, as the heat treatment could tune the silanols around the Pd species on the silicalite-1 zeolite. The Pd/S-1 catalyst with abundant silanols exhibited a higher turnover frequency (TOF) of 0.18 s −1 and a lower apparent activation energy of 51 kJ mol −1 in comparison to the catalyst with low silanol sites (0.06 s −1 and 101 kJ mol −1 ). The best performing catalyst had an average Pd nanoparticle size of 3.2 nm and Pd loading of 0.48 wt%. This catalyst showed a high CO conversion of 78% and DMO + DMC selectivity of 96%, maintaining high stability for at least 200 h. Furthermore, the synergistic interactions of silanols of silicalite-1 zeolite and Pd were confirmed by a series of in situ infrared experiments, and were found to be responsible for the enhanced activity. The silanols of S-1 zeolite played an essential role in forming the Pd active sites and had a very pronounced effect on the adsorption of CO reactant on the Pd species. Understanding the interactions between metal species and silanols of zeolite is critical for the development of high-performance zeolite catalysts.

engineering, chemical, environmental

A predicted new catalyst to replace noble metal Pd for CO oxidative coupling to DMO

Theoretically predicted innovative palladium stripe doping cobalt(111) surface with excellent catalytic performance for carbon monoxide oxidative coupling to dimethyl oxalate

Efficient CO Oxidative Coupling to Dimethyl Oxalate over the Pd/Al2O3 Nanocatalyst with the Assistance of Co Doping

The regulating effect of doping Cu on the catalytic performance of CO oxidative coupling to DMO on PdxCuy/GDY: A DFT study

CO oxidative coupling to dimethyl oxalate over Pd monolayer supported on SiC substrate: insight into the effects of different exposed terminals

CO Oxidation over MOx (M = Mn, Fe, Co, Ni, Cu) Supported on SmMn2O5 Composite Catalysts

Cobalt Single Atoms on Tetrapyridomacrocyclic Support for Efficient Peroxymonosulfate Activation.

Paired-Pd(II) centers embedded in HKUST-1 framework: Tuning the selectivity from dimethyl carbonate to dimethyl oxalate

Mechanochemical synthesis of a high-surface-area Pd/α-Al<sub>2</sub>O<sub>3</sub> catalyst for CO oxidative coupling to dimethyl oxalate reaction

Highly Effective Pd/MgO/γ-Al 2 O 3 Catalysts for CO Oxidative Coupling to Dimethyl Oxalate: The Effect of MgO Coating on γ-Al 2 O 3

Cobalt-Molybdenum Oxides for Effective Coupling of Ethane Activation and Carbon Dioxide Reduction Catalysis

Atomically Dispersed CrOX on Pd Metallene for CO-Resistant Methanol Oxidation

The synergistic effect in the heteronuclear double-atom catalysts on CO activation: Insights from DFT calculations

Design of Cu/MoOx for CO2 Reduction via Reverse Water Gas Shift Reaction

Pd–Mo bimetallic catalysts for electrochemical reduction of carbon dioxide to carbon monoxide

Heterogeneous Co1/P1Mo12O40 single-atom catalyst for CO oxidation via termolecular Eley-Rideal (TER) mechanism

Modulating the Electronic Structure of PdCoP Nanonetworks Alloy for Efficient Electro-Catalysis of Methanol Oxidation

Tuning the selectivity of Pd-based catalysts for CO oxidative esterification: Regulating Pd's electronic effect

Theoretical Investigations of Non-Noble Metal Single-Atom Catalysis: Ni1/FeOx for CO Oxidation

Theoretical study on electroreduction of CO 2 to multi-carbon compounds catalyzed by Mo-based two-dimensional carbon-rich conjugated frameworks in tandem

Emerging co-synthesis of dimethyl oxalate and dimethyl carbonate using Pd/silicalite-1 catalyst with synergistic interactions of Pd and silanols