Abstract:High-performance flexible piezoelectric polymer–ceramic composites are in high demand for increasing wearable energy-harvesting applications. In this work, a strategy combining solid-state shear milling (S3M) and fused filament fabrication (FFF) 3D-printing technology is proposed for the fabrication of high-performance biomimetic wearable piezoelectric poly(vinylidene fluoride) (PVDF)/tetraphenylphosphonium chloride (TPPC)/barium titanate (BaTiO3) nanocomposite energy harvesters with a biomimetic fish-scale-like metamaterial. The S3M technology could greatly improve the dispersion of BaTiO3 sub-micrometer particles and the interfacial compatibility, resulting in better processability and piezoelectric performance of the nanocomposites. Typically, the FFF 3D printed energy harvester incorporating 30 wt % BaTiO3 showed the highest piezoelectric outputs with an open-circuit voltage of 11.5 V and a short-circuit current of 220 nA. It could hence drive nine green LEDs to work normally. In addition, a 3D-printed biomimetic wearable energy harvester inspired by an environmentally adaptive fish-scale-like metamaterial was further fabricated. The fish-scale-like energy harvester could harvest energy through different deformation motions and successfully recharge a 4.7 μF capacitor by being mounted on a bicycle tire and the tire's rolling. This work not only provides a 3D printing strategy for designing diversified and complex geometric structures but also paves the way for further applications in flexible, wearable, self-powered electromechanical energy harvesters.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c02491.Schematic diagram of solid-state shear milling equipment, ion–dipole interaction between the positively charged surfaces of TPPC and the CH2–CF2 dipoles in PVDF molecular chains, X-ray diffraction patterns and FT-IR spectra of the printed PVDF and PVDF/BaTiO3 nanocomposites, SEM images of 3D-printed nanocomposites, schematic diagram of the COMSOL simulation of PVDF embedded with BaTiO3 nanoparticles, the piezoelectric output current of BT30 under a linear motor at different accelerations, digital photo of the biomimetic energy harvester showing a clear fish-scale structure, the COMSOL simulation results of the energy harvester with a fish-scale-like structure, and a schematic diagram of the fixed–fixed end beam model (PDF)Commercial LEDs driven by a square energy harvester (MP4)Output current generated by the fish-scale-like energy harvester as a bicycle tire rolls (MP4)Process for charging a 4.7 μF capacitor by the fish-scale-like energy harvester (MP4)This article has not yet been cited by other publications.

Carbon anchored conducting polymer composite linkage for high performance water energy harvesters

Stretchable, Breathable, and Stable Lead‐Free Perovskite/Polymer Nanofiber Composite for Hybrid Triboelectric and Piezoelectric Energy Harvesting

Enhanced nanogenerator by embedding lead-free double perovskite Cs2AgBiBr6 in polymer matrix for hybrid energy harvesting

Microporous polymer membrane assisted water induced electricity generation based on triboelectrification and electrostatic induction

Trapping Ions to Enhance High-Field Energy Harvesting Performance by Filling Polar Macromolecular Dielectrics

Assembling all-wood-derived carbon/carbon dots-assisted phase change materials for high-efficiency thermal-energy harvesters

Interfacial Polarization and Dual Charge Transfer Induced High Permittivity of Carbon Dots‐Based Composite as Humidity‐Resistant Tribomaterial for Efficient Biomechanical Energy Harvesting

Scalable piezoelectric energy harvesting from PVDF-HFP/BZT-BCT/GO hybrid composite film

Combining Solid-State Shear Milling and FFF 3D-Printing Strategy to Fabricate High-Performance Biomimetic Wearable Fish-Scale PVDF-Based Piezoelectric Energy Harvesters

Multiple hydrogen bonds network enabled sustainable and reproducible cellulose/liquid metal composite elastomer for clean energy collection and conversion

Interface modulated 0-D piezoceramic nanoparticles/PDMS based piezoelectric composites for highly efficient energy harvesting application

High Energy Harvesting Performance in Piezoelectric Composite Films Employing Large Piezoelectric Fillers and Interface Engineering

Nanosheet‐Doped Polymer Composites with High Intrinsic Piezoelectric Properties for Energy Harvesting

3D-Printed Conducting Polymer Hydrogel-based DC Generator for Self-powered Electromechanical Sensing

Dynamic Pluronic F127 Crosslinking Enhancement of Biopolymeric Nanocomposites for Piezo-Triboelectric Single-Hybrid Nanogenerators and Self-Powered Sensors

Carbon Dot-Based Composite Films for Simultaneously Harvesting Raindrop Energy and Boosting Solar Energy Conversion Efficiency in Hybrid Cells

A Fluorinated Polymer Sponge with Superhydrophobicity for High-Performance Biomechanical Energy Harvesting

Enhanced Output Performance of Piezoelectric Nanogenerators by Tb-Modified (BaCa)(ZrTi)O 3 and 3D Core/shell Structure Design with PVDF Composite Spinning for Microenergy Harvesting

Carbonized conjugated microporous polymers hollow spheres incorporated with fatty alcohols for ultra-highly efficient energy storage and conversion

A Robust and Low‐Cost Sulfonated Hypercrosslinked Polymer for Atmospheric Water Harvesting

High-Efficiency Poly(Vinylidene Fluoride-Co-Hexafluoropropylene) Loaded 3D Marigold Flower-Like Bismuth Tungstate Triboelectric Films for Mechanical Energy Harvesting and Sensing Applications