Abstract:Abstract Accurate wellbore hydraulics simulations have been effective in assisting engineers to budget well time and materials, design and execute safe, optimum drilling operations. In this context, "accurate" is commonly understood as 0.1 pound per gallon (ppg) delta, or less, between measured and predicted equivalent circulating density (ECD). Extended-reach-drilling (ERD) wells have been gaining recent adoption due to advancements in drilling technologies. This type of well, by its geometrical nature, poses a challenge to pressure management, hole cleaning and wellbore stability. This increases the relevance of simulation aids. Simultaneously, the industry has seen challenges in achieving the accuracy levels required to model and simulate these wells appropriately. This work closes this gap. Several factors affect the accuracy of ECD predicting algorithms, including but not limited to: the wellbore geometry, pumping schedule, formation and fluid's temperature profiles, physical properties and drilling parameters. Offset information from five different wells was used as basis of investigation and verification. While opportunities for better simulation set-ups were found, it was also identified that refinements to the modeling assumptions were required. The prediction for these wells was enhanced by taking an existing drilling simulator and (1) improving the accuracy of pipe positioning estimation; (2) augmenting the understanding of the eccentric annular flow-field; and (3) including the effects of pipe rotation. This led to a superior determination of the downhole flow-regimes, pressure drops, cuttings transport efficiencies and constrictions due to cuttings beds accumulation. The presented enhanced simulator has been validated against 10+ additional wells. The prediction accuracy significantly improved where it previously lacked. Simultaneously, accuracy was maintained (or slightly improved) in conditions where it originally performed. For ERD wells as shallow as 5,000ft TVD and MD's in excess of 40,000ft, the original ECD predictions diverged as much as 1.5ppg (~400psi) from pressure-while-drilling (PWD). The achieved superior predictions were never above 0.1ppg (~26psi) delta when compared to PWD. Using this advanced simulator, engineers were able to tailor the appropriate rheology profiles to drill ERD wells at optimum performance and determine the best fluid systems’ configuration to achieve it. Operations were completed as planned and budgeted, without unexpected changes in drilling parameters This work presents an enhanced methodology to accurately model annular pressure drops in ERD wells. In addition to accounting for the appropriate flow-regime transitions in a downhole eccentric annulus, this method provides a "true north" as far as "tolerable" cuttings bed accumulation to maintain pressures within formation limits. By using this simulator, engineers were able to customize drilling fluids rheology profiles for minimum pressure loss gradients at performant sag resistant levels, and safely drill challenging ERD wells.

A New Calculation Model for Equivalent Circulating Density Considering Interface Effect between Various Fluids during Cementing Process

Numerical modelling on effect of loading rate on uplift behavior of suction caissons

Study on the Equivalent Density Tool and Depressurisation Mechanism of Suction-Type Depressurisation Cycle

Prediction of transient wellbore cement circulating temperature distribution using CFD simulation

Behavior of equivalent circulating density in extended-reach drilling with cuttings deposit bed

A Developed Robust Model and Artificial Intelligence Techniques to Predict Drilling Fluid Density and Equivalent Circulation Density in Real Time

Improving displacement efficiency by optimizing pad fluid injection sequence during primary cementing of eccentric annulus in shale gas horizontal wells

Study on annular pressure buildup phenomenon in subsea wells considering the effect of cement

Modeling fluctuating pressure in the eccentric annulus with a four-parameter rheological method

Research on ECD Distribution Law under Managed Pressure

A novel algorithm for evaluating cement azimuthal density based on perturbation theory in horizontal well

Study of Retention of Drilling Fluid Layer on Annulus Wall during Cementing

CFD Method for Predicting Annular Pressure Losses and Cuttings Concentration in Eccentric Horizontal Wells

Enhanced Annular Pressure Drop Modeling Assists to Drill Extreme Shallow Ultra-ERD Wells

Real-Time Prediction of Equivalent Circulation Density for Horizontal Wells Using Intelligent Machines

Advanced Mud Displacement Modeling for Slim Hole Cementing Operations

Explainable machine-learning-based prediction of equivalent circulating density using surface-based drilling data

Short-Term and Long-Term Mechanical Models of Wellbores Considering Cement Consolidation and Formation Creep

A wellbore fluid performance parameters–temperature–pressure coupling prediction model during the managed pressure cementing injection stage

Sensitivity analysis of factors controlling the cement hot spot temperature and the corresponding well depth using a combined CFD simulation and machine learning approach

Modelling the Effects of Temperature and Pressure on Equivalent Circulating Density (ECD) During Drilling Operations Using Artificial Neural Networks