Abstract:Simultaneous Localization and Mapping (SLAM) technology based on LiDAR can achieve real-time robot positioning and establish environmental maps in unknown environments. LiDAR odometry can achieve accurate pose estimation in short distances or small-scale environments, but the accuracy will decrease with the accumulation of errors. At the same time, under scenes with insufffcient structural features, point cloud-based LiDAR SLAM will show degradation phenomena, leading to failures in localization and mapping. We propose a loop closure detection method based on fusion of Inertial Measurement Unit (IMU) and LiDAR information to reduce system cumulative errors and solve environment degradation problems. Firstly, by fusing LiDAR key feature and IMU information, an odometry calculation method is proposed based on Iterative Extended Kalman Filtering (IEKF) to improve the accuracy of FAST-LIO initial pose. Then in loop closure detection, by considering geometric and intensity information simultaneously, a new scan context global descriptor is constructed from dedistortion feature points of front-end IMU to enhance the accuracy of loop closure detection for original point cloud descriptors. Finally, GTSAM is used for global optimization and GPS constraint is introduced to reduce trajectory drifts, obtaining globally consistent trajectories and mapping. Compared with existing LiDAR SLAM on KITTI dataset and self-collected dataset, proposed method has smaller trajectory errors on KITTI sequences, which reduced by 15 than baseline FAST-LIO2, and average time consumption of loop closure detection is reduced by about 50 than SC-ALOAM, and mapping drifts is reduced, which enhanced mapping accuracy and robustness while ensuring global consistency of constructed maps.

EPSC-LOAM: Feature Submap Based LiDAR Odometry and Mapping with Edge-Planar Scan Context for Mobile Robots

A LiDAR-intensity SLAM and loop closure detection method using an intensity cylindrical-projection shape context descriptor

Semantic scan context: a novel semantic-based loop-closure method for LiDAR SLAM

SCE-LIO: An Enhanced LiDAR Inertial Odometry by Constructing Submap Constraints

An Enhanced Multi-Sensor Simultaneous Localization and Mapping (SLAM) Framework with Coarse-to-Fine Loop Closure Detection Based on a Tightly Coupled Error State Iterative Kalman Filter

FELC-SLAM: Feature Extraction and Loop Closure Optimized Lidar SLAM System

An Effective LiDAR-Inertial SLAM-Based Map Construction Method for Outdoor Environments

SCL-SLAM: A Scan Context-enabled LiDAR SLAM Using Factor Graph-Based Optimization

Three-Dimensional Lidar Localization and Mapping with Loop-Closure Detection Based on Dense Depth Information

3D Lidar SLAM Based on Ground Segmentation and Scan Context Loop Detection

When-to-Loop: Enhanced Loop Closure for LiDAR SLAM in Urban Environments Based on SCAN CONTEXT

A LiDAR SLAM With PCA-Based Feature Extraction and Two-Stage Matching

E-LOAM: LiDAR Odometry and Mapping with Expanded Local Structural Information

LeGO-LOAM-SC: An Improved Simultaneous Localization and Mapping Method Fusing LeGO-LOAM and Scan Context for Underground Coalmine

LiDAR-IMU Tightly-Coupled SLAM Method Based on IEKF and Loop Closure Detection

F-LOAM: Fast LiDAR Odometry And Mapping

Research on SLAM Algorithm of Mobile Robot Based on the Fusion of 2D LiDAR and Depth Camera

ODLC_SAM: a novel LiDAR SLAM system towards open-air environments with loop closure

Light-LOAM: A Lightweight LiDAR Odometry and Mapping based on Graph-Matching

Segmented Curved-Voxel Occupancy Descriptor for Dynamic-Aware LiDAR Odometry and Mapping