Abstract:Atomically dispersed and nitrogen-coordinated single iron sites (FeN4) embedded in carbon (Fe-N-C) catalysts are the most promising platinum group metal (PGM)-free catalysts. However, they have yet to match their Pt counterparts for oxygen reduction reaction (ORR) activity and stability in proton exchange membrane fuel cells (PEMFCs). Here, we developed viable Fe-N-C catalysts, which, for the first time, demonstrated competitive activity to that of Pt/C catalysts and dramatically enhanced stability and durability under practical PEMFC operating conditions. The most active Fe-N-C catalyst achieved a record half-wave potential (E1/2 = 0.915 V vs. RHE at 0.6 mgcatcm-2) and an ORR mass activity of 10.5 mA mgcat at 0.9 V in (RDE) tests, exceeding a Pt/C baseline catalyst (60 µgPt cm-2) by 40 mV in acidic electrolytes. This compelling activity of the Fe-N-C catalyst in aqueous acids on rotating disk electrode (RDE) was successfully transferred to a fuel cell membrane electrode assemblies (MEAs), generating an initial current density of 44.2 mA cm-2 exceeding the U.S. DOE 2025 target (i.e., 44 mA cm-2) at 0.9 VIR-free under O2. Under practical hydrogen-air conditions, record 151 mA cm-2 at 0.8 V and peak power density of 601 mW cm-2 were achieved. Importantly, we discovered that depositing nitrogen-carbon species on the catalyst surface via chemical vapor deposition (CVD) dramatically enhanced catalyst stability, evidenced by performance durability after accelerated stress tests (30 000 square-wave voltage cycles under H2/air) and long-term steady-state life tests (> 300 hours at 0.67 V). Innovative identical location-scanning transmission electron microscopy (IL-STEM) experiments confirmed that the CVD process leads to deposition of nitrogen-doped carbon onto the catalyst surfaces. Along with theoretical modeling, a reconstruction of the carbon structure adjacent to FeN4 sites leads to increased robustness against demetallation and carbon oxidation. This work opens new avenues for developing earth-abundant iron-based catalysts with extraordinary activity and stability, thus competing with Pt and addressing the cost barrier of current PEMFCs.

Optimizing the Atomic Structure of Ruthenium Deposited on Pt/C Cathode Catalysts to Enhance Durability of Automotive Fuel Cell

Improving the ORR Performance by Enhancing the Pt Oxidation Resistance

Enhancing CO Tolerance in PEMFC Anodes via Thermal Oxidation Induced RuO 2 Blocking Shell on a PtRu/C Catalyst

Surface Engineering of Carbon-Supported Platinum as a Route to Electrocatalysts with Superior Durability and Activity for PEMFC Cathodes

Preparation of Oxygen Reduction Catalyst Electrodes by Electrochemical Acidification and Synergistic Electrodeposition

Metallic Ru‐Ru Interaction in Ruthenium Oxide Enabling Durable Proton Exchange Membrane Water Electrolysis

Catalytic Approaches Towards Highly Durable Proton Exchange Membrane Fuel Cells with Minimized Pt Use

Controlled doping of ultralow amounts Ru on Ni cathode for PEMWE: Experimental and theoretical elucidation of enhanced performance

Highly Active and Stable Bimetallic Ordered Catalysts for Oxygen Reduction Reaction Improvement in Polymer Exchange Membrane Fuel Cells

Oxyanion Engineering on RuO2 for Efficient Proton Exchange Membrane Water Electrolysis

Highly dispersed ultrafine PtCo alloy nanoparticles on unique composite carbon supports for proton exchange membrane fuel cells

Hydrogenated TiO2 Carbon Support for PtRu Anode Catalyst in High‐Performance Anion‐Exchange Membrane Fuel Cells

Ruthenium-iridium alloyed oxides with remarkable catalytic stability for proton exchange membrane water electrolysis at industrial current density

Non-iridium-based electrocatalyst for durable acidic oxygen evolution reaction in proton exchange membrane water electrolysis

Redesign of Anode Catalyst for Sustainable Survival of Fuel Cells

Structural evolution of Pt-based oxygen reduction reaction electrocatalysts

Durable and High-Power Iron-Based Cathodes in Competition with Platinum for Proton-Exchange Membrane Fuel Cells

Cr dopant mediates hydroxyl spillover on RuO2 for high-efficiency proton exchange membrane electrolysis

Highly Efficient RuTe 2 /C Electrocatalyst for Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cells

Durable and High-Power Iron-Based Cathodes for Proton-Exchange Membrane Fuel Cells

Hollow Pt‐Encrusted RuCu Nanocages Optimizing OH Adsorption for Efficient Hydrogen Oxidation Electrocatalysis